If you already have a set of golf clubs and want to know how long your clubs are, you can easily determine their length by following the measuring technique below. Use a forty-eight-inch sturdy straight edge aluminum ruler. A tape measure is too flimsy and won’t give you an accurate measurement even if it is pressed against the club’s shaft.
Should all my golf clubs be the same length?
Some sets are made with all clubs the same length as the eight or six iron, but the seven iron is the most popular. You will still need to make sure you get your clubs fitted adequately for you; in fact, it is more important with the one length than with variable length. There are lots of reasons to switch to a one-length iron.
What golf clubs should a beginner start with?
- A driver or 3-wood: These are your tee shot clubs, at the very beginning I would recommend a 3-wood but you can decide.
- A hybrid: Something to help you hit it a long way on the fairway and get out of trouble
- Irons: You don’t need many of these at this stage, a 5-iron, 7-iron and 9-iron will work nicely.
How long should your golf clubs be if you're 5'10?
The average male is approximately 5' 10" (177.8cm) with nearly 68% between 5' 6" and 5' 11". The difference between the finished stock men’s and women’s clubs is usually 1" difference in the length. With this in mind, some charts will use these proportions; that is for each 5" or 6" of height differential, the clubs should be 1" shorter or longer.
How to shorten the length of a golf club?
- Remove The Grip
- Remove The Grip Tape
- Measure Twice and Cut Once
- Make The Cut
- File Off Any Lose Edges On The Cut Line
- Place A New Grip On The Club
- Add Weights to balance any change in swing weight
- Go Try Out Your New Shorter Length Club
How to Figure Out the Ideal Club Length
You will find that the vast majority of players start off by figuring out their height and wrist to floor measurement when it comes to buying the correct golf club length.
Should I Get a Custom Fit?
A custom fit can be great, but you need to remember some things. If you are ordering a club that is custom to you, the club shaft is going to be made in such a way that the flex is going to match the club length.
Conclusion
As we’ve covered above, getting the right fitting for your golf clubs is essential in making sure that you get the best results from your golf game. Hopefully the above guide has helped you to find out what the correct golf length should be for your height.
What does a professional club fitter do?
Professional club fitters take a number of factors into consideration as they assess the club specification requirements of each golfer. Specifically as it pertains to club length, they will look at a couple of static measurements, and they will also conduct a “dynamic” fitting assessment:
Why is wrist to floor measurement important?
The reason it is so pervasive in club fitting is because it adds an additional layer to the measurement, which improves its accuracy.
How important is shaft length in golf clubs?
The length of the shaft in your driver is extremely important, as it plays a big role in determining how fast you can swing the club, the club’s path and angle of attack and, ultimately, how well you’re able to make center-face contact.
Why is playing with clubs too short bad?
Playing with clubs that are either too short or too long can cause a golfer to change their stance or swing in ways that could negatively affect the outcome. It can lead to subconscious swing compensations that can result in inconsistent ball striking.
What happens if a golfer has a short club?
If a player has clubs that are too short, they will usually bend over too much from the waist in their address position. Conversely, clubs that are too long will require the player to stand too erect. Both of these subconscious adjustments could potentially make their swing motion less effective than it should be.
What is the most important factor in creating distance with the driver?
However, studies have shown that the single most important factor in creating distance with the driver is not the length of the shaft, but rather the golfer’s ability to hit the ball on the sweet spot of the club face. So, while shaft length is important in generating distance, there is a point of “diminishing returns.”.
Why are golf clubs not fitting?
Having golf clubs that are not properly fitted for length can be a major contributor to inconsistent performance. For the same reasons that someone who is 6’ 5” wouldn’t walk into a men’s clothing store and buy a suit off the rack, golfers need to make sure that the golf clubs that they buy are suited to their body type and size.
How much should the toe of a golf club be raised?
With your middle irons, the toe of the club should be slightly raised, about 1/2 to a 1/4 of an inch. With longer hitting irons (2, 3, 4) the club head will rest completely on the ground, while with your others (8, 9, PW) the toe will be more elevated.
How to make a belt buckle?
Step 1. Stand with your feet shoulder width apart with a slight bend in your knees. Let your arms hang down and interlace the fingers in front of your belt buckle.
How long is a golf shaft?
This is the length of the golf shaft you will need. The average male has a measurement of 43 inches. Depending on your arm length and height, this may vary but it should be around that number. If you get a number that is wildly off from this one, check your stance and remeasure.
How does length affect golf?
The right length of the golf clubs can make all the difference in a golfer's game. Each club's length can greatly influence how far a golfer hits the ball and how straight they can hit. By following these simple steps, you can help get the right clubs for you.
Why is it important to hit balls with the club before buying one?
It is important to hit balls with the club before you buy one to get a feel for how the different lengths affect your shot. The longer the club the more power you can hit with, but it will also be harder to control. Always give up distance for accuracy when choosing the club.
Who is Bryan Rose?
Bryan Rose is an experienced journalist and web writer, spending nearly 12 years in the publishing industry. Rose works for a variety of Demand Studios websites, writing mostly for ehow.com and Golflink.com. He holds a Bachelor of Arts in History degree from the University of Wisconsin.
What happens if the club is too long?
If the club is too long, the face tape may show heel dominant striking. If the club is too short, the face tape may show toe dominant striking. If dominant striking is found, the demo length should be changed accordingly. This is to see whether the impact location changes with the length.
What are the problems with driving a golf club?
Direction problems: When looking at the driver length, too long can lead to inconsistent ball striking or strikes towards the heel. Heel strikes encourage left-to-right curvature i.e. Fade, cut, slice or push slice. Strike problems: Ball striking can be more difficult if your club is too long.
What is the average driver length for Rickie Fowler?
Rickie Fowler is known to have used a 43.5” driver length and the Tour average build is 44.5”. Tour players main priority is hitting fairways for days, weeks and months. Shorter driver lengths make it easier to hit with the centre of the face more frequently.
What happens if you have too short of a club?
Direction problems: Too short club length can lead to strikes towards the toe or low on the face. Toe strikes encourage right-to-left curvature i.e. Draw, hook or pull hook. Strike problems: With too short club length, the most common problem is ‘Thin’ shots (hitting higher on the ball).
What can you use to wipe off golf ball?
You could use something that will wipe off like water or marker pens on the golf ball to give yourself some easy feedback on the clubface.
Can you strike your heel with wedges?
Any dominant toe or heel striking would likely be from technique. The aim of the exercise is to get the striking as central as possible. It can be done with wedges, irons and woods. It is often only done on irons in a fitting but I would encourage you to do it on all clubs.
Why are bladed heads bigger?
The heads are bigger, blade longer and perimeter weighting is better to maintain ball speed with off centre hits. More bladed heads tend to come with shorter standard lengths by 0.5” or so. This is to encourage a tad more control and ease striking. This type of golfer may not need the extra help with speed from length.
How to measure wrist for golf club?
Step 2. Stand with your hands hanging loosely by your side. Have your assistant measure the distance from where your wrist hinges to the ground, going straight down. This is your wrist-to-floor measurement. Step 3. Use the "Golf Club Measurement Guide" (see Resources).
How much shorter are ladies golf clubs than men?
Ladies' standard-sized golf clubs run approximately 1-inch shorter than men's clubs.
What is the average size of a golf club for women?
As a result, the standard size of golf club for women is shorter in length and is designed for women that are between 65-inches (5'5") and 69-inches (5'9") tall. For women who are shorter than 5'5", golf manufacturers produce a "petite" golf club that is both shorter and lighter than the standard length club.
Where is Jackson Lewis?
Based in Memphis , Jackson Lewis has been writing on technology-related material for 10 years with a recent emphasis on golf and other sports. He has been freelance writing for Demand Media since 2008. Lewis holds a Master of Science in computer science from the United States Naval Postgraduate School.
How long should a golf shaft be?
The chart recommends + 0.25 inches. It means that your golf shaft has to be made 0.25 inches longer than the standard length. Similarly, if your height is 66“ and the wrist to floor distance is 31.5 inches, the chart recommends – 0.75 inches.
How to measure golf club length?
Important Information before we know “How to Measure the Golf Club Length.” 1 The standard irons designed for women are usually an inch shorter than the standard irons designed for men. 2 The United States Golf Agency (USGA) limits the maximum length of golf clubs. 3 The minimum length for all the golf clubs, including putters, is 18 inches. 4 The maximum length for all golf clubs except the putters is 48 inches. 5 The putters do not have the maximum length limit. 6 The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length. 7 A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three.
What does a longer shaft mean?
The longer shaft does mean longer golf club length. A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three. Therefore we must know about the standard length of the woods, and irons. Let’s first discuss the standard lengths of woods.
How to measure club size with LDA?
The following are steps of measuring the club size using the LDA method. Step 1. First, put the shaft against the wall so that the toe of the driver is placed on the ground. Step 2.
What is the minimum length of a golf club?
The minimum length for all the golf clubs, including putters, is 18 inches. The maximum length for all golf clubs except the putters is 48 inches. The putters do not have the maximum length limit. The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length.
Where is the shaft of a putter located?
It is because the shaft of the putter is mostly installed in the heel. The shaft placement is either near the heel or in the center of the club head. Therefore, it is essential to measure the putter differently. The method of measuring the length of a putter is described in the following steps. Step 1.
What is the USGA method?
Method 5: The United States Golf Association (USGA) Method. The USGA method is part of the rule book’s method: “Rules of Golf.”. In it, an apparatus containing an angle iron is used. The angle iron forms a 60-degree angle from the horizontal, and it is also used to stop /hold the iron.
How to measure for golf clubs?
The two basic measurements that you should know are your regular height and the height of your wrist to the floor. Another measurement is measuring your wrist height from the floor while your knees are bent. Your Height Your height can be used to determine the length of the iron that you want to have. The standard length for clubs is used for people who are between the 5'9" to 6 feet in height. For every 3 inches in height from this measurement, you would add or subtract 1/2 inches to the length of the club. If you are between 6'0" to 6'3" in height, you want a club with an extra 1/2 inch to the standard length. If you are 5'6" to 5'9" in height, you want a club that subtracts 1/2 inches in length from the standard size. Your Wrist-to-Floor Height You could also measure the height of your wrist from the floor. You need to stand up straight with your arms held loosely at your sides. Have someone measure from the crease of your wrist down to the level floor. This measurement can be used with your height measurements to also determine the right length of the clubs. Your Wrist-to-Floor Height with Knees Bent Some golfers also measure their wrist height when they bend their knees to determine a length for the driver that they should use. To get this measurement for yourself, make sure to stand with your feet apart at shoulder length. Then slightly bend your knees and hold your hands together while locking your fingers in front of your body. Have someone measure the height from your wrists to the floor. Once you have the measurements, you can take them to a club fitter or pro shop to get the right length for your clubs. Always test out the swing of the irons, drivers, and putter to get one that feels right in your hands and that has the perfect grip. To maximize your golf experience, consider investing in a remote control golf caddie to pack your new clubs around the course.
Why is it so good to use golf clubs?
Using the clubs has been awesome because you get to learn the pace of the game as well as the feel of the clubs as you swing them. You were also able to save money. However, as you gain more experience, you might begin to wonder whether the golf clubs are the right size for you.
How many inches to a standard length golf club?
Six feet, five inches-add one and a half inches to the standard length of the club. Six feet, three inches to six feet, five inches-add one inch to the standard length of the club. Six feet to six feet, three inches-add half an inch to the standard length of the club.
How to tell if a golf club is too long?
Below you’ll find common signs that indicate the clubs you’re using are too long: 1 You have to stand up almost completely straight. 2 You’re unable to move your lower body using proper swinging mechanics 3 The ball often flies off to the left and too high. 4 The club’s shaft feels very weak 5 You’re constantly hitting the ball with the toe of the golf club.
How long is a standard iron club?
Standard Club Sizes. Iron: The one iron club is a little over forty inches in length. Each iron falls half an inch with each size until you reach the nine iron which measures in at a little over thirty-six inches. Differences in irons can also occur due to shaft material.
How long is a golf driver?
On average, most golfers use a driver that’s forty-four inches in length, however, a club shaft up to forty-eight inches in allowed for competitions.
How tall should a golf iron be?
Height Recommendations for Irons. Here you’ll find the standard recommended measurements for golf clubs based on height: Six feet, six inches and taller-add two inches to the standard length of the club. Six feet, five inches-add one and a half inches to the standard length of the club.
How long is a three wood putter?
Putter: The standard length of a putter is thirty-four inches, however, the length of a putter is measured much differently than irons. It often depends on the putter’s construction.
Why is dynamic fit measuring more reliable?
The dynamic fit measuring technique is more reliable because the measurement is taken as a player swings a club with the help of a launch monitor. A launch monitor is used to determine the correct head and shaft that will best suit the golfer’s playing style.