- Stand on level ground with your golf shoes on, or comparable height athletic shoes.
- Grab either a flexible measuring tape or yardstick.
- Stand up tall and use the measuring tape or yardstick to measure from the floor up to your wrist.
- Use the measurement and your height to find the proper length clubs for you using the chart below. There are three results, with measurement variations of each.
What size golf clubs do I need 5 8?
- Height-Based Chart. The most common method used to recommend the length of a golf club is a "height-based" chart. ...
- Length Based Chart
- Height Height Length Factor
- Feet-Inches Centimeters. For instance, we have a 5' 5" lady and a 6' 2" man. ...
- Wrist-to-floor (WTF) Measurement. ...
- Height Height WTF. ...
How to pick the right size golf clubs?
Golf has been ... You want to choose a driver that fits you and your playstyle, so find something that will help you get those extra yards on your drives! Find a Grip and Feel That Fit You You need to find a set of clubs that feel right for you, and ...
What is the average size of a golf club?
The standard length of a driver for men used to be 43.5 inches with a steel shaft and 44 inches for a graphite shaft. However, in the 21st century a standard driver is considered to be 45 inches. Most male golfers are wielding drivers that measure 45 to 48 inches, the maximum allowed under the United States Golf Association's Rules of Golf.
How do you measure loft in a golf club?
How to Measure Golf Club Loft Angle (Step-by-Step)
- Collect Tools. Before you start the processing of measuring the loft of your clubs, you are going to need to collect a few supplies.
- Set Up a Flat Surface. Potentially the most critical part of this process is to make sure the club is sitting on a flat surface when you complete this ...
- Put the Golf Club Shaft in Place. ...
- Make Sure the Clubface is Square. ...
How do you know what size golf clubs to get?
To choose golf clubs that are the right fit, all you need is your height. If you're between 5 ft 9” and 6 ft (1.5 m 23 cm and 1.8 m) tall, you should go with the standard length for golf clubs. If you're taller than 6 ft (1.8 m), you'll need longer clubs.
How do you measure golf clubs at home?
Measure drivers and irons from the end of the grip to the heel of the club. Use a 48 in (120 cm) measuring stick since a standard yardstick isn't long enough. Position the end of the measuring stick or tape measure at the end of the grip at the top of the club.
How tall should my golf clubs be?
For example, for a golfer that stands 6'2” and has a wrist-to-floor of 39”, the recommendation for proper club length would be 1/2” longer than standard length.
What is the standard length of a 7 iron?
The standard length of a 7 iron is 37 inches on steel and 37.5 inches with the structure made of graphite.
What is standard club length?
All clubs, including putters, must at least 18 inches long. Putters with straight shafts are measured from the top of the grip to the sole, directly down the shaft.
How long should your golf club be?
Have a friend or the salesman measure the distance from your wrists to the floor. This is the length of the golf shaft you will need. The average male has a measurement of 43 inches. Depending on your arm length and height, this may vary but it should be around that number.
Does height matter for golf clubs?
Because golf is a game of repetition and your swing should not vary in most circumstances, your stance will be the same. It doesn't matter how tall you are if you have a deeper crouch in your swing because your wrists will then be closer to the ground, which means you need slightly shorter clubs.
How do you fit golf clubs?
The best way to determine proper shaft length for your custom fit golf clubs is to get into an athletic stance like you're set up to the golf ball, and measure the distance between your wrists and the floor. You can also adjust the shaft length in conjunction with your golf swing.
How does length help in golf?
Getting the right length can prolong your golfing career and help you hit the ball longer by improving your ball striking. Better ball striking also means more consistent carry distances.
What is the sloping scale for golf?
Most charts have a sloping scale for the height and wrist-to-floor, with player’s height on X and wrist-to-floor height on Y. These two measurements combined give the club length and a lie angle for irons to test.
What happens if the club is too long?
If the club is too long, the face tape may show heel dominant striking. If the club is too short, the face tape may show toe dominant striking. If dominant striking is found, the demo length should be changed accordingly. This is to see whether the impact location changes with the length.
What are the problems with driving a golf club?
Direction problems: When looking at the driver length, too long can lead to inconsistent ball striking or strikes towards the heel. Heel strikes encourage left-to-right curvature i.e. Fade, cut, slice or push slice. Strike problems: Ball striking can be more difficult if your club is too long.
What happens if you have too short of a club?
Direction problems: Too short club length can lead to strikes towards the toe or low on the face. Toe strikes encourage right-to-left curvature i.e. Draw, hook or pull hook. Strike problems: With too short club length, the most common problem is ‘Thin’ shots (hitting higher on the ball).
What can you use to wipe off golf ball?
You could use something that will wipe off like water or marker pens on the golf ball to give yourself some easy feedback on the clubface.
Why do golf clubs need to be changed?
The clubs can be made or changed to allow you to swing freely. Good posture can give you the best chance of making proper contact with the ball.
How to measure for golf clubs?
The two basic measurements that you should know are your regular height and the height of your wrist to the floor. Another measurement is measuring your wrist height from the floor while your knees are bent. Your Height Your height can be used to determine the length of the iron that you want to have. The standard length for clubs is used for people who are between the 5'9" to 6 feet in height. For every 3 inches in height from this measurement, you would add or subtract 1/2 inches to the length of the club. If you are between 6'0" to 6'3" in height, you want a club with an extra 1/2 inch to the standard length. If you are 5'6" to 5'9" in height, you want a club that subtracts 1/2 inches in length from the standard size. Your Wrist-to-Floor Height You could also measure the height of your wrist from the floor. You need to stand up straight with your arms held loosely at your sides. Have someone measure from the crease of your wrist down to the level floor. This measurement can be used with your height measurements to also determine the right length of the clubs. Your Wrist-to-Floor Height with Knees Bent Some golfers also measure their wrist height when they bend their knees to determine a length for the driver that they should use. To get this measurement for yourself, make sure to stand with your feet apart at shoulder length. Then slightly bend your knees and hold your hands together while locking your fingers in front of your body. Have someone measure the height from your wrists to the floor. Once you have the measurements, you can take them to a club fitter or pro shop to get the right length for your clubs. Always test out the swing of the irons, drivers, and putter to get one that feels right in your hands and that has the perfect grip. To maximize your golf experience, consider investing in a remote control golf caddie to pack your new clubs around the course.
Why is it so good to use golf clubs?
Using the clubs has been awesome because you get to learn the pace of the game as well as the feel of the clubs as you swing them. You were also able to save money. However, as you gain more experience, you might begin to wonder whether the golf clubs are the right size for you.
How to determine the length of a golf club?
The first step in figuring out your proper club length is to start with your overall height measurement. This is the most basic method of identifying the proper club length you’d need, but by itself, does not offer enough information for an accurate determination. In the normal club fitting procedure, a player’s overall height is used, but only as part of the complete process of fitting a golfer for club length.
When is the length of the club correct?
Only when the length of the club is correct, calibrated to the golfer's height, will players be able to assume a proper stance that will allow them to make the right swing action , which will give them the best chance to have consistency in their ball striking.
Why is Fitting for Length Important?
It can lead to subconscious swing compensations that can result in inconsistent ball striking.
Why are static measurements considered a club fitting?
The two prior measurements discussed are considered “static” methods of club fitting because the measurements are performed while the player is standing still. Professional club fitters will often supplement these static measurements by incorporating an additional element into their club fitting sessions, a process that is considered “dynamic.” In a dynamic club fitting, a player will be evaluated during the course of their actual swing motion, with measurements taken at impact and by observing ball flight.
Why take length off of a shaft?
The effect of taking length off of a shaft will be to effectively increase the stiffness of its flex. How much it increases stiffness will depend on from which end of the shaft the trimming is done.
How important is shaft length in golf clubs?
The length of the shaft in your driver is extremely important, as it plays a big role in determining how fast you can swing the club, the club’s path and angle of attack and, ultimately, how well you’re able to make center-face contact.
What happens if a golfer has a short club?
If a player has clubs that are too short, they will usually bend over too much from the waist in their address position. Conversely, clubs that are too long will require the player to stand too erect. Both of these subconscious adjustments could potentially make their swing motion less effective than it should be.
How to measure golf club length?
Important Information before we know “How to Measure the Golf Club Length.” 1 The standard irons designed for women are usually an inch shorter than the standard irons designed for men. 2 The United States Golf Agency (USGA) limits the maximum length of golf clubs. 3 The minimum length for all the golf clubs, including putters, is 18 inches. 4 The maximum length for all golf clubs except the putters is 48 inches. 5 The putters do not have the maximum length limit. 6 The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length. 7 A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three.
How to measure club size with LDA?
The following are steps of measuring the club size using the LDA method. Step 1. First, put the shaft against the wall so that the toe of the driver is placed on the ground. Step 2.
How long should a golf shaft be?
The chart recommends + 0.25 inches. It means that your golf shaft has to be made 0.25 inches longer than the standard length. Similarly, if your height is 66“ and the wrist to floor distance is 31.5 inches, the chart recommends – 0.75 inches.
What does a longer shaft mean?
The longer shaft does mean longer golf club length. A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three. Therefore we must know about the standard length of the woods, and irons. Let’s first discuss the standard lengths of woods.
How long are putters?
The United States Golf Agency (USGA) limits the maximum length of golf clubs. The minimum length for all the golf clubs, including putters, is 18 inches. The maximum length for all golf clubs except the putters is 48 inches. The putters do not have the maximum length limit.
Where is the shaft of a putter located?
It is because the shaft of the putter is mostly installed in the heel. The shaft placement is either near the heel or in the center of the club head. Therefore, it is essential to measure the putter differently. The method of measuring the length of a putter is described in the following steps. Step 1.
What is the USGA method?
Method 5: The United States Golf Association (USGA) Method. The USGA method is part of the rule book’s method: “Rules of Golf.”. In it, an apparatus containing an angle iron is used. The angle iron forms a 60-degree angle from the horizontal, and it is also used to stop /hold the iron.
How to determine what length golf clubs to buy?
Using your height and then your wrist to floor measurements is a great way to get an idea of what the right length of clubs will be.
What does it mean to use the correct size golf club?
When you use the correct golf club sizes you will be hitting your shots with the ideal length club which will help you to get a solid contact on your shots. This accurate measurement can help you to achieve consistent contact by ensuring the club face is squared properly at impact.
What Are Standard Length Golf Clubs?
As you can see in our golf club size chart above these would typically fit in the 34″ to 35.5″ range.
Why is it important to know the size of your golf clubs?
This is because if you use golf clubs that are either too tall or too short for you there is a chance that you won’t hit shots consistently and more distance.
Why is it important to choose the right golf club size?
These range from having a better connection with your shots and hitting them from the correct lie angle. Both of these benefits will contribute to your achieving a better golf handicap score.
How does the handicap index work?
The golf handicap index works by calculating your score s from previous rounds. Therefore with better shots you are more likely to achieve better scores on the golf course.
Why are golf clubs so complex?
The reason that golf club sizes can be a complex topic is because it isn’t as easy as just saying that height is the only factor in which size to choose. In our complete guide we will explore what other factors are at play and what some of the main benefits are from taking the time to choose golf club sizes bespoke to yourself.
How to measure club length?
To get an accurate measurement of club length. Measure the club at the angle that the bottom of the clubhead lies in its playing position on the floor.Measure from the floor to the end of the Grip.
Does size matter in golf?
When it comes to golf clubs, size does matter. While correct golf club size can help you become a better golfer and make the game more enjoyable, inaccurate club length will have the exact opposite effect. But what is the correct club size for you? Discover all in the Golf Clubs Size Charts.
How to measure golf clubs?
Measuring Your Clubs in Five Steps 1 Use a forty-eight-inch sturdy straight edge aluminum ruler. A tape measure is too flimsy and won’t give you an accurate measurement even if it is pressed against the club’s shaft. If you don’t currently own an aluminum yardstick, you can easily find one at a local home improvement store. 2 Don’t use your workbench to measure the golf clubs. A better alternative is to stand and place the club in its correct position at address. The sole of the club should be completely flat on the ground. 3 The straight edge should be placed so that the corner is touching the ground. The club should remain in address at this time with the ruler squaring up against the hosel. The hosel is the portion of the club where the clubhead is connected to the shaft. 4 The straight edge should be pressed as close as possible to the shaft. Now, read the measurement at the bottom of the grip cap. This should tell you the length of the shaft.
How many inches to a standard length golf club?
Six feet, five inches-add one and a half inches to the standard length of the club. Six feet, three inches to six feet, five inches-add one inch to the standard length of the club. Six feet to six feet, three inches-add half an inch to the standard length of the club.
How tall should a golf iron be?
Height Recommendations for Irons. Here you’ll find the standard recommended measurements for golf clubs based on height: Six feet, six inches and taller-add two inches to the standard length of the club. Six feet, five inches-add one and a half inches to the standard length of the club.
What is the most important spec to pay attention to when you’re shopping for a new set of golf clubs?
According to the pros, the length of golf clubs is the most crucial spec to pay attention to when you’re shopping for a new set of clubs or an extra driver or hybrid.
How many inches is a three wood?
Three Wood: This club measures in at forty-two inches, which is two inches shorter than other types of woods.
Why is dynamic fit measuring more reliable?
The dynamic fit measuring technique is more reliable because the measurement is taken as a player swings a club with the help of a launch monitor. A launch monitor is used to determine the correct head and shaft that will best suit the golfer’s playing style.
What should be taken into account when buying a new golf club?
When you’re getting fit for a new set of clubs, launch angle, dispersion, spin rate, and ball speed should also be taken into account in order to ensure you purchase the correct length.
What is the average size of a golf club for women?
As a result, the standard size of golf club for women is shorter in length and is designed for women that are between 65-inches (5'5") and 69-inches (5'9") tall. For women who are shorter than 5'5", golf manufacturers produce a "petite" golf club that is both shorter and lighter than the standard length club.
How to measure wrist for golf club?
Step 2. Stand with your hands hanging loosely by your side. Have your assistant measure the distance from where your wrist hinges to the ground, going straight down. This is your wrist-to-floor measurement. Step 3. Use the "Golf Club Measurement Guide" (see Resources).
What golf clubs do you need if you are shorter than the beginning height?
If you are shorter than the beginning height on the club measurement guide, then you will need to purchase "Ladies Junior" or "Petite" golf clubs.
