- Measure your height. Clubs are matched to your height and the distance between your hands and the ground.
- Measure your wrist-floor length. The other essential measurement that you'll need is the distance between your wrists and the ground.
- Swing a standard-length club at the store. If you're considering investing in custom clubs, these two basic measurements will give you specific angle information and a plus-or-minus length requirement ...
- Provide your handicap. If you play with a handicap, it can be helpful to provide it when you head to the pro shop to check out clubs.
How to find the right Golf Club size for You?
Another way to find out the right golf club size for you is through a dynamic fitting. This is a more precise way of fitting and involves the use of a launch monitor to help determine the correct shaft and head to best suit the golfer.
Do you need a fitting for your golf clubs?
A proper fitting will also help you determine which clubs you need in your bag. Of course, every set should include a driver and a putter, but a fitting helps you find out everything in between. A common technique is to start with how far you hit your 7 iron.
Why should I see a fitter before getting a set of clubs?
Alternatively, it's good for the fitter to see you swing the clubs you already own and play with regularly to see what might make for a good corrective size, helping to address any inconsistencies in your swing. Standard size golf club lengths are different for men and women.
How do I choose the right shaft for my golf clubs?
In general, people with faster swings prefer stiff shafts on their woods and iron shafts on the irons. People with slower swings are more likely to prefer flex shafts on the woods and graphite shafts on the irons.
How do I know what size golf club I need?
Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").
How do I find the right golf clubs for me?
Your swing speed and distance are the main criteria for choosing the correct shaft and a professional club fitter can help. If you don't have one, the rule of thumb is that if you hit your driver less than 200 yards in the air you should choose Ladies flex; just about 200 yards, Seniors flex.
How do I measure myself for a set of golf clubs?
3:0615:40ARE MY CLUBS THE RIGHT LENGTH? FIND THE CORRECT GOLF ...YouTubeStart of suggested clipEnd of suggested clipStand in normal standing upright posture with your arms at your sides. And you're just going to takeMoreStand in normal standing upright posture with your arms at your sides. And you're just going to take a ruler just a standard yardstick. And you're going to measure.
How much should I spend on golf clubs as a beginner?
Beginner golfers should spend anywhere from $350 to $1,000 on a set of golf clubs. The more money you spend, the better the technology you will get, and the easier it will be to transition into being a great player.
How does club fitting work?
In short, club fitting is the process of determining which golf club allows a player to: Consistently strike a ball closest to the center of the face, with. Clubface that squares to the target line with the sole of the club flush to the ground, that. Optimizes a player's performance, feel and consistency, while.
What height are standard golf clubs for?
Today it is 45”, and some manufacturers have even gone to 45 1/2” as their norm. However, studies have shown that the single most important factor in creating distance with the driver is not the length of the shaft, but rather the golfer's ability to hit the ball on the sweet spot of the club face.
Can I fit my own golf clubs?
It is possible to custom fit almost any existing golf club a player uses. Grip, loft and lie changes are the most common but the complexity and cost of retro-fitting a golfer's current clubs increases as more changes are made, making the case for simply getting new clubs stronger.
How long should your driver be based on height?
Tony Finau is one of the tallest golfers on the PGA Tour at 6'4″, and his driver's length is usually around 45 inches. Both Finau and Fowler are two of the longest drivers on the PGA Tour....Driver Shaft Length Based Solely on Height.Height (feet/inches)Driver Shaft Length5'0″-5'2″44.5″4'10”-5'0″44″< 4'10”43″7 more rows•May 9, 2021
What are the elements of a golf club?
To narrow down your choices, there are only three elements of any club that are important: the shaft, the clubhead and the grip. But within each category are alternatives, and there are a few basic things you should know about what's available.
What shafts are best for golf?
Decide on what shafts are best for you. You must choose between shafts made of graphite or steel. Steel shafts are somewhat less expensive, and if you are a better golfer than average, steel shafts are probably the ones you should have. But if you're just starting out or your game needs work, you probably will do well to buy graphite shafts ...
How far can you hit a golf ball with flex shafts?
If you hit it 20 yards farther, pick Ladies. And if you can hit the ball 225 to 250 yards , you're ready for Normal flex shafts. Only some of the playing professionals should choose Extra-Stiff shafts because they can hit the ball 300 yards or more.
What are golf grips made of?
There are grips made of rubber, leather and synthetic materials , and even grips with fabric interwoven in them to stay tacky even in the rain. Since your only contact with the club is your grip, don't discount its importance.
Why do you need graphite shafts?
But if you're just starting out or your game needs work, you probably will do well to buy graphite shafts for these reasons: First, they are lighter, so they are easier for you to swing. Second , graphite shafts tend to twist in your hands less so you will hit more accurate shots.
How to tell if a golf club has a high loft?
You can judge the loft by how much of the face of a club is angled upward or how much the top of the face is angled away from the shaft.
What is the best head material for golf?
There are three choices of head material to choose from, each with its own characteristics: Steel – Not too expensive and durable, steel is the most popular material. Titanium – Great for hitting from the tee, titanium is half the weight of steel and helps to get the ball airborne sooner.
What is the best bounce for golf?
As a general rule, most golfers are best with a bounce between 10 to 14 degrees. High Bounce Wedges – Those with a high space between the ground and the leading edge, the biggest bounce is around 18 degrees. Best for play out of soft turf and sand, they are good for golfers with steep attack angles.
What is loft angle?
Loft. A vital measurement, the loft, or loft angle, refers to the angle formed by a line running down the centre of the shaft and the face of the club. Measured in degrees, a golf club with a relatively low loft, such as 3 iron sitting at 21–23 degrees, will make the ball go further than one with a higher loft.
How does a thick grip affect golf swing?
The thickness of the grip can have a massive effect on your swing. A grip that is too thin can lead to golfers having large hand actions leading into the swing. However, too thick a grip will restrict your hands and have an equally devastating impact.
How many yards difference between 7 irons?
Other irons such as the 7-iron sit between these two extremes, with around 12-15 yards difference between each club. Essentially, the lower the golf club number is, the lower the flight, the further it will travel but the harder it is to control.
What happens if a golf shaft is too stiff?
Selecting a shaft too stiff will cause lower ball flight and a loss of distance, whereas a shaft too soft can result in ballooning and, again, loss in distance.
What are the factors to consider when selecting a golf shaft?
There are three big factors to consider with your golf shafts: flex, length, and torque. Here’s how each of those works with your swing. Flex: Golf clubs are rated by five different types of flex, and each flex is designed for a specific "load” factor. “Load" is a result of Club Head Speed (CHS) within a certain time frame.
How tall is the average golfer?
The average American male is 5’9”-5’10”, so any golfer from 5’8”-5’11” can typically be fit into standard length clubs. As a general rule, every two inches in height above or below standard height means you’ll need to add or subtract a half inch to or from your club’s standard length.
Why is a bigger grip better for golf?
A lot of golfers now prefer a slightly oversized grip. A larger grip can help you keep the lighter pressure on the club, allowing you to swing fast er to generate more speed and distance . That lighter pressure can also reduce fatigue in the hands, making larger grips good for golfers with arthritis or tendonitis.
Why is a softer shaft better?
Some prefer a softer flex because it allows them more control and gives them a smoother swing. However, if your shaft isn’t stiff enough you might give the ball too much loft. It’s important the tempo and length of your swing match your flex. If a shaft is too stiff, you’ll swing too fast and won’t produce enough spin.
What happens if your golf shaft is too stiff?
If a shaft is too stiff, you’ll swing too fast and won’t produce enough spin. If It’s too soft, you can put too much spin on the ball and lose distance and consistency. Length: Having the proper length of your clubs is essential to making a good swing.
What is the angle of loft on a driver's face?
Loft: Another factor to look at is the angle of loft you want on the driver’s face, which is usually between 8 and 14 degrees. The appropriate loft is actually determined by how the player tends to strike the ball, whether they hit up and lift the ball into the air or hit down and through, like an Iron.
Why do you need custom clubs?
If you’re above the beginner level, you’ve gotten a little better and gained more experience. Custom clubs can help make the most of the tools you have. Pairing the correct clubs with your swing can help you fill in those gaps and eliminate poor shots on the course, helping you realize your potential.
What is a static fitting?
Static fittings are more for golfers with little or no experience and, although not overly reliable, a fitting for length and grip size are better than no fitting at all. Another way to find out the right golf club size for you is through a dynamic fitting. This is a more precise way of fitting and involves the use of a launch monitor ...
Is the length of a putter a factor?
The length of putter can have a big impact on both control and accuracy, but the selection of putter length is not just dependent on the golfer’s height. Depending on the golfer’s experience, it may be necessary to accommodate the golfer’s style of putting in to the measurement, as technique is a huge factor when it comes to making the decision ...
Does size matter in golf?
When it comes to golf clubs, size does matter. While correct golf club size can help you become a better golfer and make the game more enjoyable, inaccurate club length will have the exact opposite effect. But what is correct club size for you? Well, it depends on several factors including the different types of golf club, your swing style, posture and skill level. But above all, it depends on your height. To make the selection easier, Golfsupport therefore prepared a quick golf club size guide for beginners.
