- Stand on level ground with your golf shoes on, or comparable height athletic shoes.
- Grab either a flexible measuring tape or yardstick.
- Stand up tall and use the measuring tape or yardstick to measure from the floor up to your wrist.
- Use the measurement and your height to find the proper length clubs for you using the chart below. There are three results, with measurement variations of each.
Full Answer
What size golf clubs do I need 5 8?
Apr 01, 2022 · The correct golf club size starts with the golfer’s height and wrist-to-floor measurement. After that, depending on the type of club – wood, iron, or putter – a size can be determined according to the manufacturer’s golf club sizes charts. Denny Putsh I’m a golf enthusiast just like you and have been playing the game since I was 12 years old.
How to pick the right size golf clubs?
Sep 21, 2018 · When it comes to determining the golf club size you need, there are two different ways to custom fit golf clubs. The first type of golf club fitting is a static fit, and as the name suggests, this is a static measurement taken from your finger tip or wrist to floor, trying different lie angle heads and then taking a glove measurement to determine the size of grip required by …
What is the average size of a golf club?
Sep 29, 2020 · As you can see below using a wrist to floor measurement is a good way to see your required length to ensure that you have the correct golf club sizes for you. This can be determined by wearing standard shoes on a hard surface and having your arms by your side. ( …
How do you measure loft in a golf club?
Mar 18, 2022 · The first step in figuring out your proper club length is to start with your overall height measurement. This is the most basic method of identifying the proper club length you’d need, but by itself, does not offer enough information for an accurate determination.
Are All Golf Clubs The Same Size?
Not all golf clubs are the same size. Part of what helps golfers get distance is by varying the length of the golf club shaft. The longer the shaft...
Why Do Golf Club Sizes Matter?
Golf club sizes can make all the difference in your ability to perform on the golf course. If a golf club is too long or too short for you, then th...
Are Custom Fittings Worth It?
Custom golf fittings will tell you the exact sizes that you need for each of your golf clubs. Knowing the proper golf club sizes will ensure that y...
Can I Adjust My Own Golf Club Sizes?
If you find that your golf clubs are not the exact length you need, you can adjust them by cutting or extending the clubs and then regripping them....
Golf Club Size Guide: Irons
To choose irons for your height, Golf Monthly recommends using the golf club size guide below:
Golf Club Size Guide: Driver
In theory, the longer the driver shaft length, the greater the shot distance. Therefore, the longer the driver the better, right? Well, the reality is actually quite different.
Golf Club Size Guide: Putter
When it comes to purchasing a putter, control and accuracy are imperative if you want to get the ball into the hole with the first – or at least with the lowest number of strokes possible.
What does it mean to use the correct size golf club?
When you use the correct golf club sizes you will be hitting your shots with the ideal length club which will help you to get a solid contact on your shots. This accurate measurement can help you to achieve consistent contact by ensuring the club face is squared properly at impact.
Why is it important to know the size of your golf clubs?
This is because if you use golf clubs that are either too tall or too short for you there is a chance that you won’t hit shots consistently and more distance.
Why is it important to choose the right golf club size?
These range from having a better connection with your shots and hitting them from the correct lie angle. Both of these benefits will contribute to your achieving a better golf handicap score.
How to make your golf swing more efficient?
To make your golf swing feel more efficient, you have to match your lie angle to your club length based on your position with regard to the club. This will help you to hit shots that feel more comfortable and it will help with more consistent swings.
Who invented single length irons?
Single-length irons were introduced by Bryson Dechambeau and that has changed the way that people think of golf club sizes. A recommendation made by Bryson is that your entire iron range should be the same length as your 7 iron.
How important is the length of the shaft in a golf driver?
The length of the shaft in your driver is extremely important, as it plays a big role in determining how fast you can swing the club, the club’s path and angle of attack and, ultimately, how well you’re able to make center-face contact. A simple analysis of the physics of the golf swing makes it clear that, all things being equal, ...
What happens if a golfer has a short club?
If a player has clubs that are too short, they will usually bend over too much from the waist in their address position. Conversely, clubs that are too long will require the player to stand too erect. Both of these subconscious adjustments could potentially make their swing motion less effective than it should be.
Why is playing with clubs too short bad?
Playing with clubs that are either too short or too long can cause a golfer to change their stance or swing in ways that could negatively affect the outcome. It can lead to subconscious swing compensations that can result in inconsistent ball striking.
Does a longer shaft mean faster club head speed?
A simple analysis of the physics of the golf swing makes it clear that, all things being equal, the longer the shaft, the faster the club head speed. Put another way, a longer shaft will generate more distance than a shorter shaft.
What does a professional club fitter do?
Professional club fitters take a number of factors into consideration as they assess the club specification requirements of each golfer. Specifically as it pertains to club length, they will look at a couple of static measurements, and they will also conduct a “dynamic” fitting assessment:
Why take length off of a shaft?
The effect of taking length off of a shaft will be to effectively increase the stiffness of its flex. How much it increases stiffness will depend on from which end of the shaft the trimming is done.
Does trimming the tip of a golf shaft increase flex?
Trimming from the tip end of the shaft, on the other hand, will have much more of an effect on flex and would therefore only be recommended if the goal is to also stiffen the shaft. As an example, tip trimming could potentially result in increasing the flex from Regular to Stiff, or from Stiff to Extra Stiff.
How to measure golf club length?
Important Information before we know “How to Measure the Golf Club Length.” 1 The standard irons designed for women are usually an inch shorter than the standard irons designed for men. 2 The United States Golf Agency (USGA) limits the maximum length of golf clubs. 3 The minimum length for all the golf clubs, including putters, is 18 inches. 4 The maximum length for all golf clubs except the putters is 48 inches. 5 The putters do not have the maximum length limit. 6 The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length. 7 A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three.
What is the minimum length of a golf club?
The minimum length for all the golf clubs, including putters, is 18 inches. The maximum length for all golf clubs except the putters is 48 inches. The putters do not have the maximum length limit. The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length.
How long are putters?
The United States Golf Agency (USGA) limits the maximum length of golf clubs. The minimum length for all the golf clubs, including putters, is 18 inches. The maximum length for all golf clubs except the putters is 48 inches. The putters do not have the maximum length limit.
Do putters have a maximum length limit?
The putters do not have the maximum length limit. The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length. A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three.
What does a longer shaft mean?
The longer shaft does mean longer golf club length. A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three. Therefore we must know about the standard length of the woods, and irons. Let’s first discuss the standard lengths of woods.
Where to place ruler on golf club?
Place the club in the playing position so that the sole of the club / driver is touching the ground. A golf ruler is then placed at the backside of the club so that the top of the ruler is touching the ground by the club’s heel. Now, by using the reading on the measuring rod from the end of the grip cap.
How long should a golf shaft be?
The chart recommends + 0.25 inches. It means that your golf shaft has to be made 0.25 inches longer than the standard length. Similarly, if your height is 66“ and the wrist to floor distance is 31.5 inches, the chart recommends – 0.75 inches.
Does golf club length matter?
Golf club length matters a ton. If you’re holding proper form, where your back and arms are straight and your core is engaged when you swing, then you’re doing all that you can on that front. When you swing the club, it’s supposed to effortlessly collide with the ball and send it flying.
Is there enough weight to a golf club?
There’s not enough weight to the club. If the club is too long for you, then you’re spending extra time during ramp up which is the amount of time spent during your initial downswing. You want a balance between your abilities, ramp up, and momentum while cutting through the wind with as little resistance as possible.
Why do you have to swoop on your golf club?
Because the club is longer, you have to swoop on your downward swing, causing the force of your wood – if you’ve hit it correctly – to be applied to the bottom of the ball and send it upwards. A wood without enough length just doesn’t cut it. You’d be sending the ball higher but with almost no distance.
Why are golf clubs made the way they are?
The reason clubs are made the way they are is to gather momentum as you swing down. If your club is too short, you’re going to build momentum while having resistance, meaning you will push too hard against the wind and not just swing naturally. There’s not enough weight to the club.
What happens if you play too long in a golf club?
If the club is too long for you, then you’re spending extra time during ramp up which is the amount of time spent during your initial downswing. You want a balance between your abilities, ramp up, and momentum while cutting through the wind with as little resistance as possible.
Does length matter when hitting a golf ball?
Last but not least, length matters when it comes to hitting a ball through the air. If your woods didn’t have the length that they do, and they were shorter, you’d be sending your ball almost straight up and they wouldn’t close much of a distance.
When shortening a golf club, do you have to remove the crown?
When you shorten a golf club, you have to remove the crown, and safely disconnect the shaft from the head.
What is the average size of a golf club for women?
As a result, the standard size of golf club for women is shorter in length and is designed for women that are between 65-inches (5'5") and 69-inches (5'9") tall. For women who are shorter than 5'5", golf manufacturers produce a "petite" golf club that is both shorter and lighter than the standard length club.
How to measure wrist for golf club?
Step 2. Stand with your hands hanging loosely by your side. Have your assistant measure the distance from where your wrist hinges to the ground, going straight down. This is your wrist-to-floor measurement. Step 3. Use the "Golf Club Measurement Guide" (see Resources).
How tall is a golf club for women?
As a result, the standard size of golf club for women is shorter in length and is designed for women that are between 65-inches (5'5") and 69-inches (5'9") tall. For women who are shorter than 5'5", golf ...
How much shorter are ladies golf clubs than men?
Ladies' standard-sized golf clubs run approximately 1-inch shorter than men's clubs.
How to measure for golf clubs?
The two basic measurements that you should know are your regular height and the height of your wrist to the floor. Another measurement is measuring your wrist height from the floor while your knees are bent. Your Height Your height can be used to determine the length of the iron that you want to have. The standard length for clubs is used for people who are between the 5'9" to 6 feet in height. For every 3 inches in height from this measurement, you would add or subtract 1/2 inches to the length of the club. If you are between 6'0" to 6'3" in height, you want a club with an extra 1/2 inch to the standard length. If you are 5'6" to 5'9" in height, you want a club that subtracts 1/2 inches in length from the standard size. Your Wrist-to-Floor Height You could also measure the height of your wrist from the floor. You need to stand up straight with your arms held loosely at your sides. Have someone measure from the crease of your wrist down to the level floor. This measurement can be used with your height measurements to also determine the right length of the clubs. Your Wrist-to-Floor Height with Knees Bent Some golfers also measure their wrist height when they bend their knees to determine a length for the driver that they should use. To get this measurement for yourself, make sure to stand with your feet apart at shoulder length. Then slightly bend your knees and hold your hands together while locking your fingers in front of your body. Have someone measure the height from your wrists to the floor. Once you have the measurements, you can take them to a club fitter or pro shop to get the right length for your clubs. Always test out the swing of the irons, drivers, and putter to get one that feels right in your hands and that has the perfect grip. To maximize your golf experience, consider investing in a remote control golf caddie to pack your new clubs around the course.
How tall is a golf club?
The standard length for clubs is used for people who are between the 5'9" to 6 feet in height. For every 3 inches in height from this measurement, you would add or subtract 1/2 inches to the length of the club. If you are between 6'0" to 6'3" in height, you want a club with an extra 1/2 inch to the standard length.
Why is it so good to use golf clubs?
Using the clubs has been awesome because you get to learn the pace of the game as well as the feel of the clubs as you swing them. You were also able to save money. However, as you gain more experience, you might begin to wonder whether the golf clubs are the right size for you.
How to measure wrist height for golf driver?
Your Wrist-to-Floor Height with Knees Bent Some golfers also measure their wrist height when they bend their knees to determine a length for the driver that they should use. To get this measurement for yourself, make sure to stand with your feet apart at shoulder length.
How to measure wrist to floor height?
You need to stand up straight with your arms held loosely at your sides. Have someone measure from the crease of your wrist down to the level floor.
How to measure golf club?
To measure a golf club, start by laying it on a flat, horizontal surface, like a table or countertop . Then, turn the bottom of the club head so it's at a 60-degree angle to the surface you're measuring the club on. Finally, use a tape measure to measure from the end of the grip to the point where the bottom of the club head meets the flat surface. ...
How to measure club length?
Calibrate the club length measuring apparatus. Turn on the machine and move the grip support assembly to the left until it reaches the end of the apparatus. Put the calibration rod into the machine, resting the right end of the rod against the 60-degree sole plate of the clubhead support.
Which plane should golf clubs be measured on?
Clubs should be measured on a horizontal, rather than vertical, plane to get the most accurate results. ...
Where is the sole on a golf club?
The sole is the bottom of the club head. You may need to rest the sole against a plate to ensure it sits at the proper angle. Measure from the end of the grip to the end of the sole. Use a tape measure to find the length in inches between the end of the grip and the farthest point that the sole contacts the horizontal surface.
How to rock a golf club back and forth?
Ensure the clubhead rests against the clubhead support, with the sole touching the 60-degree sole plate. The grip should rest in the grip support. Gently rock the club back and forth to be sure it’s not being constrained and can move naturally.
How to read scale on a scuba diver?
Slide the grip support until it touches the grip, then read the scale. Move the grip support to the right until the butt plate is gently touching the end of the grip. Step back from the scale and read the digital value. ...
