- Overall Height. The first step in figuring out your proper club length is to start with your overall height measurement.
- Wrist-to-Floor Measurement. The wrist-to-floor measurement is a common, frequently-used metric for determining correct club length.
- In-Swing Considerations (Dynamic Fitting) The two prior measurements discussed are considered “static” methods of club fitting because the measurements are performed while the player is standing still.
What is the standard length for a golf club?
What Is the Standard Length of a Golf Club?
- Rules of Golf. The rules regarding golf club construction are found in Appendix II of the Rules of Golf, published by the United States Golf Association.
- Graphite Vs. Steel. ...
- Drivers. In a 2010 “Golf Digest” article, PGA Tour player Bubba Watson said the typical off-the-rack driver is 45.5 inches long.
- Irons and Hybrids. ...
What length golf clubs do you need?
- 3-wood
- 4- and 5-hybrids
- 6- to 9-irons
- Pitching wedge
- Sand wedge
- Driver
- Putter
How to size golf clubs for better performance?
- Swing the clubs Swinging a standard-length club is an essential step in fitting golf clubs. ...
- Apply tape to the bottom of your clubs This step determines where your club will make contact with the ground. ...
- Identify your handicap Finally, identifying your handicap will allow you to match with the right club type. ...
How do you measure a golf club?
Length and Height Measurement for Custom Golf Clubs
- Height measurement There are aspects in height measurement that need consideration. ...
- Swinging a standard golf club This step is crucial and needs the utmost seriousness if you need your custom golf club. ...
- Presenting your handicap
How does a lengthened golf club work?
What is distance in golf?
When do You Need Custom Golf Clubs?
Why use irons on flat ground?
Why do you need to lengthen a golf ball?
What happens if your woods aren't longer?
What happens if you use too long golf clubs?
See more
How to determine the length of a golf club?
The first step in figuring out your proper club length is to start with your overall height measurement. This is the most basic method of identifying the proper club length you’d need, but by itself, does not offer enough information for an accurate determination. In the normal club fitting procedure, a player’s overall height is used, but only as part of the complete process of fitting a golfer for club length.
When is the length of the club correct?
Only when the length of the club is correct, calibrated to the golfer's height, will players be able to assume a proper stance that will allow them to make the right swing action , which will give them the best chance to have consistency in their ball striking.
Why is Fitting for Length Important?
It can lead to subconscious swing compensations that can result in inconsistent ball striking.
Why are static measurements considered a club fitting?
The two prior measurements discussed are considered “static” methods of club fitting because the measurements are performed while the player is standing still. Professional club fitters will often supplement these static measurements by incorporating an additional element into their club fitting sessions, a process that is considered “dynamic.” In a dynamic club fitting, a player will be evaluated during the course of their actual swing motion, with measurements taken at impact and by observing ball flight.
Why take length off of a shaft?
The effect of taking length off of a shaft will be to effectively increase the stiffness of its flex. How much it increases stiffness will depend on from which end of the shaft the trimming is done.
Why is wrist to floor measurement important?
The reason it is so pervasive in club fitting is because it adds an additional layer to the measurement, which improves its accuracy.
How important is shaft length in golf clubs?
The length of the shaft in your driver is extremely important, as it plays a big role in determining how fast you can swing the club, the club’s path and angle of attack and, ultimately, how well you’re able to make center-face contact.
How to determine the correct size golf club for beginners?
The correct golf club size starts with the golfer’s height and wrist-to-floor measurement.
How tall is a golf club?
Manufacturers usually make clubs to account for golfers anywhere between 4’8” to 6’7” inches tall. The second measurement is wrist-to-floor distance. This is done by standing on a flat surface with your arms relaxed and pointing down. You then measure the distance between the ground and the line where your wrist meets your hand.
What factors affect the size of a golf club?
Here’s another factor that affects the appropriate golf club size. The angle and the grip size of the club are as important as the height and wrist-to-floor measurements . However, this means more to serious professional golfers than to someone just starting out.
What is custom fitting golf?
Custom golf fittings will tell you the exact sizes that you need for each of your golf clubs. Knowing the proper golf club sizes will ensure that you can get the clubface to match up to the ball each and every time you swing. The more accurate your club sizes are, the better the chance you have of scoring and performing. Even though custom golf fittings can be expensive, most golfers find them to be very well worth the pricing.
How to adjust golf clubs?
If you find that your golf clubs are not the exact length you need, you can adjust them by cutting or extending the clubs and then regripping them . If you don’t have the tools to do this yourself, there are typically local golf club repair shops that offer these services.
Why do manufacturers make golf tables?
Manufacturers create such tables to help everyone from beginner golfers to pro golfers choose the right club size for their play. Here’s how your size affects the dimensions of your needed golf club size and why it matters. Last but not least, the grip size should also be determined for the club to fit perfectly in your hands.
What is the difference between men's and women's golf clubs?
The difference between men’s and women’s clubs is generally noticeable on the grip. Men’s golf clubs have larger grips and are also about 2.5 cm longer than women’s golf clubs. Kids’ clubs are even smaller than women’s for the most part. Knowing what type of golf club you need is the first step in determining the appropriate size.
Mind Your Height
First, you need to consider your height when buying golf clubs. This will basically serve as the backbone that will help you determine the right shaft length for your clubs. Without it, you won’t be able to get fitted properly.
Do Wrist-to-Floor Measurements
But your height in itself can only provide an incomplete estimation when determining the right shaft length for you. To complete the process (and get the most accurate calculations), you need to factor in your wrist-to-floor measurements as well.
Consider Club Type
Bear in mind that the optimal length will vary based on the type of golf club. Take woods or drivers for example. Aside from the swings, shaft lengths also affect its path, and attack angles. Moreover, it will impact how well you make center-face shots.
Check Effects on Shaft Flex
Having the length modified to suit your needs can significantly help you improve your game play. Nevertheless, you should be aware that doing so can affect the shaft’s overall flex, which is also important if you want to excel at golf.
Use Clubs With the Right Shaft Length
Shaft lengths are extremely important, especially since it affects the quality of your swings. Plus, the longer the shaft is, the faster the club head speed will be. So best get the clubs that are long (or short) enough for you.
How to measure golf club length?
Important Information before we know “How to Measure the Golf Club Length.” 1 The standard irons designed for women are usually an inch shorter than the standard irons designed for men. 2 The United States Golf Agency (USGA) limits the maximum length of golf clubs. 3 The minimum length for all the golf clubs, including putters, is 18 inches. 4 The maximum length for all golf clubs except the putters is 48 inches. 5 The putters do not have the maximum length limit. 6 The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length. 7 A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three.
How long should a golf shaft be?
The chart recommends + 0.25 inches. It means that your golf shaft has to be made 0.25 inches longer than the standard length. Similarly, if your height is 66“ and the wrist to floor distance is 31.5 inches, the chart recommends – 0.75 inches.
What does a longer shaft mean?
The longer shaft does mean longer golf club length. A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three. Therefore we must know about the standard length of the woods, and irons. Let’s first discuss the standard lengths of woods.
How to measure club size with LDA?
The following are steps of measuring the club size using the LDA method. Step 1. First, put the shaft against the wall so that the toe of the driver is placed on the ground. Step 2.
How long are putters?
The United States Golf Agency (USGA) limits the maximum length of golf clubs. The minimum length for all the golf clubs, including putters, is 18 inches. The maximum length for all golf clubs except the putters is 48 inches. The putters do not have the maximum length limit.
Where is the shaft of a putter located?
It is because the shaft of the putter is mostly installed in the heel. The shaft placement is either near the heel or in the center of the club head. Therefore, it is essential to measure the putter differently. The method of measuring the length of a putter is described in the following steps. Step 1.
What is the USGA method?
Method 5: The United States Golf Association (USGA) Method. The USGA method is part of the rule book’s method: “Rules of Golf.”. In it, an apparatus containing an angle iron is used. The angle iron forms a 60-degree angle from the horizontal, and it is also used to stop /hold the iron.
How to measure length of golf club?
To find this distance, hold your club out in front of you and measure from where your fingers touch at a right angle to where the club head meets the shaft.
Why is it bad to choose a golf club with incorrect length?
Choosing a club with incorrect length or height could lead to complications on your next shot because you may have placed too much pressure on your wrists, or have hit the ball with too much force.
How long should you keep your golf clubs?
This will depend on your height. If you are under 5’4″ you should have a club length of 38 inches or shorter. For someone at least 5’4″, those with a low handicap, more than average height and strength, the club length should be 40-42 inches. A higher handicapper is likely to need as much as 44-46 inches.
Why do golfers use high loft clubs?
It is understandable why many golfers choose high lofts since they are usually more skilled and can hit down into the ball with ease, thus increasing their distance by adding extra loft onto their club. However, new or beginner players should choose clubs with lower lofts so they can get used to playing without having to think about which side of the club head’s face should face them at impact.
Why does a ball's loft lower?
As the ball travels through the air, it lowers in height because of gravity. A higher loft means a ball that will travel further before reaching its lowest point, while a low loft means less distance on the shot.
What golf clubs do you need if you are shorter than the beginning height?
If you are shorter than the beginning height on the club measurement guide, then you will need to purchase "Ladies Junior" or "Petite" golf clubs.
How to measure wrist for golf club?
Step 2. Stand with your hands hanging loosely by your side. Have your assistant measure the distance from where your wrist hinges to the ground, going straight down. This is your wrist-to-floor measurement. Step 3. Use the "Golf Club Measurement Guide" (see Resources).
What is the average size of a golf club for women?
As a result, the standard size of golf club for women is shorter in length and is designed for women that are between 65-inches (5'5") and 69-inches (5'9") tall. For women who are shorter than 5'5", golf manufacturers produce a "petite" golf club that is both shorter and lighter than the standard length club.
How does a lengthened golf club work?
A longer distance can be achieved with a lengthened club if you have the ability to swing it with the same force and speed that you did with a shorter club . This increases the ball’s velocity upon impact, and you can hit it farther. Flex: The flex of the shaft will be altered. This happens for a few reasons.
What is distance in golf?
Distance: Quite simply, the maximum distance that you can drive the ball. Since clubs are designed within half an inch of each other, the adjustments are small, but the overall force changes dramatically. This is relevant to your arm length and size when swinging. A longer distance can be achieved with a lengthened club if you have the ability to swing it with the same force and speed that you did with a shorter club. This increases the ball’s velocity upon impact, and you can hit it farther.
When do You Need Custom Golf Clubs?
When you can’t seem to find a 9 iron or a putter that’s designed for your height. Using the information that we provided above, you can determine your
Why use irons on flat ground?
Irons are used on flat ground and are supposed to give you a way to get the ball closer. If the club shaft was longer, you’d hit the bottom hemisphere of the ball on your downward swing and send it flying through the air. That’s not what we want.
Why do you need to lengthen a golf ball?
The length is to compensate for the lighter head. You can’t lightly tap the ball in if the head is heavy and the shaft is short.
What happens if your woods aren't longer?
If your woods didn’t have the length that they do, and they were shorter, you’d be sending your ball almost straight up and they wouldn’t close much of a distance. It’s not always about the angling of the golf club head; sometimes it’s about the length and force to make it meet the ball.
What happens if you use too long golf clubs?
If you’re using clubs that are too long for you, you’re going to have a rough time closing the gap between your tee and the hole. If it’s too short, you’re going to hit it too fast without proper form.
