Find the dominant spine of the shaft with a spine finder. Use a pen to mark the two strips of masking tape along the location of the spine. Fit the club head and grip to the shaft. Align the club head and grip with the spine of the shaft. Clamp the grip end of the club in a vise and retest the alignment.
Should I spine align my golf shafts?
The shaft oscillates and if it doesn’t do this consistently it can lead to misses. It is thought that by spine aligning your shafts you will create more consistency in your game and reduce your shot dispersion.
What is the best orientation for the spine in golf?
Golf Shaft Spine Orientation There are two main positions that you can align the spine in, the swing plane and the droop plane. This is explained in detail in this article but it is felt that most benefits come to the golfer when the spine is aligned in the droop plane orientation.
Do steel shafts have spines?
Just like graphite shafts, steel shafts also have spines. Being heavier, it is sometimes trickier to find the spine of a steel shaft but they are there and you can use the same method as described above to find it. This is an interesting one, especially with the modern adjustable drivers we now see everyone use.
Does the shaft twist and bend during the golf swing?
During the golf swing the shaft is under severe strain. Throughout the swing, particularly the downswing, the shaft twists and bends but how do you know that it does this efficiently or consistently?
What is the spine on a golf shaft?
A golf shaft is said to have a 'spine' if it is inconsistent in its stiffness when bending in different directions. Aligning all the shafts within a set so their spines point in the same direction (either forward or back) is called 'spining.
How do you make a spine Finder?
0:442:28How to Make a Shaft Spine Finder - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut not too large that my bearings will fit inside and allow shoot up to my PC to be any money youMoreBut not too large that my bearings will fit inside and allow shoot up to my PC to be any money you some good bearings. And that's your basic spine finding years right there for the other bearing.
How do you build a shaft spine Finder?
1:0812:22How to Make a Golf Shaft Spine Finder - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is the one I'm using to put where you put the shaft through it right you bend it down itMoreThis is the one I'm using to put where you put the shaft through it right you bend it down it rotates around and finds the spine.
How do you true a golf shaft?
5:0715:58How to FLO a Golf Shaft (correct position of shaft alignment) - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you find the spine the shaft. That this is the point that you line up at the 12 o'clock of theMoreOnce you find the spine the shaft. That this is the point that you line up at the 12 o'clock of the shaft with the golf head.
Do graphite shafts have a spine?
Just like graphite shafts, steel shafts also have spines. Being heavier, it is sometimes trickier to find the spine of a steel shaft but they are there and you can use the same method as described above to find it.
How do you use a rod spine Finder?
Insert one end of the rod blank through the spine finder.Support the spine finder on a table or insert into a holder.Apply some pressure to the end of the blank and turn in your fingers and it will roll into the natural curve 100% accurate.The outside of this curve is the spine of the blank.
How important is arrow spine alignment?
Having the shafts spine aligned isn't really more critical from one venue to another if you're looking for as much accuracy as you can squeeze out of your equipment. For a hunting arrow it helps a lot because fixed blade broadheads will typically perform better when the arrows are as consistent as possible.
What is a Pured golf shaft?
You may have heard golfers say something like, “my shafts are pured.” To have a shaft that's “pured” is just another way of saying that the shaft has gone through an SST Pure analysis to ensure it's in the most beneficial orientation for consistent performance when attached to a club head.
What is frequency matching in a golf shaft?
Frequency matching shafts only measures the butt flex of the shaft and allows the club maker to perfectly match a set of golf clubs. It is up to the club fitter to match a shaft to the golfers swing needs. Golf shaft manufacturing processes, while having improved by leaps and bounds, are still imperfect.
What golf shaft flex should I use?
– Golf Shaft Flex ChartCarry DistanceSwing SpeedFlexUnder 200 yardsUnder 75 mphLadies or Senior200 to 240 yards75 to 95 mphRegular240 to 275 yards95 to 110 mphStiffOver 275 yardsOver 110 mphStiff or Extra StiffOct 15, 2019
Are expensive golf shafts worth it?
Because of the material and production differences, there's usually a price tag difference as well. While they may look identical on the outside, the aftermarket version of a shaft is housing better performance and for most golfers, that's worth a slight increase in cost.
Are PUREd shafts worth it?
The Results Our first myth is totally busted – PUREing a shaft led to significant distance increases. On average, our testers gained over 7 yards of total distance with the PUREd six iron compared to the non-PUREd club. That's nearly a full club of extra distance despite the fact that the two clubs had the same loft!
What is the weak plane on a ruler?
The weaker plane bends easily and the “spine” of the ruler is on the sides since it is more difficult to bend. Another method is using the Autoflex Machine. The Autoflex machine performs the same basic test as the Lockie board, but bends the shaft up instead of down. The Autoflex then marks the inside of the curved shaft (the weak plane).
What is the stiffest plane of a golf shaft?
For our purposes, the spine of a golf shaft is the stiffest plane of the shaft. Finding the stiffest plane can be performed by several different methods. One method is by using the Lockie board. When a shaft is placed on the board and bent, a state of equilibrium exists when the weaker plane is the bend plane.
Why does equilibrium exist?
Equilibrium exists because the stronger plane is not in a state of compression and tension simultaneously (as it is when it is bent). Performing the same test on a long flat ruler is the easiest way to visualize this. A shaft with a very dominant spine resembles the ruler.
Where is the Penley shaft located on the Autoflex machine?
Since Penley shafts are checked on the Autoflex machine which marks the weaker plane, graphics are placed on the shaft with Penley located 90° from the Autoflex mark (on the spine).
What is swing plane?
The swing plane means that the spine is perpendicular to the clubface and the droop plane is parallel with the clubface. This is a piece of advanced club builder knowledge that can make a difference to the feel and performance of your clubs.
What is the spine orientation in golf?
Golf Shaft Spine Orientation. There are two main positions that you can align the spine in, the swing plane and the droop plane. This is explained in detail in this article but it is felt that most benefits come to the golfer when the spine is aligned in the droop plane orientation. The swing plane means that the spine is perpendicular to ...
What is pure shaft positioning?
PUREing is probably the most famous method of optimising shaft positioning and it was invented by a company called SST (Strategic Shaft Technologies). PURE stands for P lane of U niform RE peatability. This is a proprietary process that they claim is accurate to one degree.
Why do you need to spine align your shafts?
It is thought that by spine aligning your shafts you will create more consistency in your game and reduce your shot dispersion. This process can also help improve the feel of your clubs during the swing. These all seem like outcomes most golfers would want to have in their bag.
Do irons need spine alignment?
Spine Alignment In Irons. Due to the fact that irons aren’t adjustable, getting your irons spined is a good idea. It will help you get the most from the clubs, especially on the consistency-front. If you have graphite shafted irons then getting the spines aligned is even more important.
What is a vice in golf?
A vice holds the grip-end of the club so that you can test the club. Although it important to point out here that this should be done without a grip on the club. From there you need to find the balance point that gives the club perfect oscillation, then you need to mark the shaft.
Do graphite shafts have spines?
Yes, they do. Graphite shafts have come a very long way in a short period of time thanks to new manufacturing methods and materials. Graphite shafts actually have two spines, creative called “S1 and S2” by the industry. These are the two stiffest oscillation points.
hobbes
They are trademarks for roughly the same process of finding the "spine" of a shaft and aligning it so that you get the most consistent bend profile in a shaft. The spine makes the shaft stiffer in some directions than others and you will get a lateral element to a bend rather than just in the direction of applied force.
progolf4life
Alright after doing a lot of research now this is what I have discovered.
progolf4life
do not go gentle in to that good night, rage rage against the dieing of the light. artistic license permitting i will start with: IF PUREING WERE FREE EVERYONE WOULD DO IT. defending one method over another is insanity. before i wax lyrical on why i shall take the time to thank mac94 , well corrected sir. spine , helical spine , total fallacies.
