how to fit golf driver

Fitting Elements

• Model. The center-of-mass (COM) of a driver can play a huge role in the performance characteristics of a driver.
• Loft. Loft is the angle of the clubface relative to a vertical line perpendicular to the ground. ...
• Length. Altering the length of a driver can have a significant effect on performance. ...
• Shaft. ...
• Grip. ...
• Weight & Balance. ...

Full Answer

How do you fit a driver to your game?

Weight and aerodynamics also play an important role in optimizing a driver to your game. Our certified fitters take these factors into account when fitting you for your driver, turning you into a fairway-finding machine. Clubhead speed is a product of good swing tempo, balance, shaft weight, flex, aerodynamics and weight distribution.

How do you find the best fit for Your Driver?

This precise data is then used to find the best fit for your driver. Length is fit to optimize the best combination of consistency and distance. The best loft choice is determined to maximize launch angle and spin – key ingredients to optimizing distance. Shaft flex and type are determined to optimize trajectory, distance and feel.

How do fitters recommend driver shafts?

Typically, fitters will base an initial driver shaft recommendation on a player’s swing speed and distance. In general, club head speed would be the best INITIAL indicator since distance can be greatly influenced by player perception and quality of contact.

How important are driver fittings in golf?

More times than not, a fitting focuses too much on comparing the BEST shot with one driver to the BEST shot with another. This is incomplete, at best, and in many cases will add strokes to your game rather than eliminate them. The table below compares two of the best single drives during a fitting for two different drivers.

How to measure for golf clubs?

How to improve your golf game?

What shafts do you use for a swing?

How to remove steel shafts?

How to test if a golf club is shortening?

How to buy name brand golf clubs?

How to choose a golf club size?

See more

About this website

How do you size a golf driver?

Simply hold your golf club at 45 degrees to the ground or as in your playing position. At this point take a golf club ruler or take measure and place under the sole of the club. Measure to butt of grip. This will give you you an accurate and USGA standard for measuring your golf driver.

How do you get fitted for a golf driver?

1:332:41Why You Should Get Fitted for a Driver - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo get the best directional control. And weight to optimize the balance of your driver. You want toMoreTo get the best directional control. And weight to optimize the balance of your driver. You want to have the proper face angle face angle is the direction the club is pointed.

How do I size myself for a driver?

There's a very good reason the average driver length on the US PGA Tour since 2005 has been 44.5” and not 45.5” to 46.5”. Driver loft must be matched in combination to the golfer's swing speed and their angle of attack into the ball....Driver Loft.DriverBest LoftBest Loft6018177016158014139012116 more rows•Jan 27, 2012

What size driver do I need for my height?

Driver Shaft Length Based Solely on HeightHeight (feet/inches)Driver Shaft Length5'4″-5'7″45.5″5'2″-5'4″45″5'0″-5'2″44.5″4'10”-5'0″44″6 more rows•May 9, 2021

How much does a driver fitting cost?

Driver only fittings typically cost from $50 to $175 as do 'irons' fittings. Wood/Hybrid and wedge custom fittings can be cheaper at $40 to $150 but golf club fitters will often 'refund' fitting costs if you buy clubs afterwards.

Is a driver fitting worth it?

A proper driver fitting should lead to a noticeable change in the playability, feel and overall performance of the club. And, to dispel one common misconception, a golf club fitting isn't just for advanced players.

How long should a golf driver be for my height?

Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").

How do I know my driver length?

To determine your optimum driver length, look at where you hit the ball on the face of your driver. If your hits are mostly towards the heel, your driver is too long. Another possibility is that the shaft is too light. Try choking down on the shaft and see if your contact improves.

How do I know what driver is right for me?

When you are in the market for a new driver, there are seven major aspects to consider: skill level, size and shape of the club head and clubface, color, loft, shaft flexibility, and adjustability.

What happens at a driver fitting?

It is easier to hit the center of the clubface with a shorter club than a longer club, therefore if you feel like you are struggling with your current driver here's a few things you can try before you cut that driver down or order a new one.Jan 15, 2014Will a Shorter Driver Give You More Distance ? | Article | TPI - MyTPI.comhttps://www.mytpi.com › articles › swing › will_a_shorter...https://www.mytpi.com › articles › swing › will_a_shorter...Search for: Are shorter driver easier to hit?

Can I get my current driver fitted?

To find the right size clubs for your body, use recent height measurement to determine the proper angle for your clubs. It usually helps to have another person measure, so you get the most accurate measurements possible. Measure your basic height from the top of your head to the bottom of your feet.How to Fit Golf Clubs - wikiHowhttps://www.wikihow.com › Fit-Golf-Clubshttps://www.wikihow.com › Fit-Golf-ClubsSearch for: How should my golf clubs fit my height?

Should a beginner get fitted for golf clubs?

When fitting a driver, it's important to get loft, lie, shaft, and grip sorted, but better driving may be hiding in a shorter shaft. In fact, a shorter shaft should help you find the sweet spot more often and may even add distance.May 2, 2019Golf Tips: Your driver is too long. Cut down your shaft and cut your scoreshttps://progolfnow.com › golf-tips-driver-length-accuracyhttps://progolfnow.com › golf-tips-driver-length-accuracySearch for: Should I shorten the length of my driver?

Does golf club fitting make a difference?

A Driver Fitting is a detailed process. It involves the customization of all the major aspects of a driver that can affect the playability, feel and overall performance of the club. Our trusted advisors use industry-leading TrackMan* technology to elevate your game.

Golf Club Size Guide: [2022 Height Chart & Standard Lengths]

Related Post: How Many Golf Clubs Should I Carry? Golf Club Size Chart. The below average golf club size chart covers the size and heights for different golf clubs. As you can see below using a wrist to floor measurement is a good way to see your required length to ensure that you have the correct golf club sizes for you.

How to Determine the Right Golf Club Length | Curated.com

Having golf clubs that are not properly fitted for length can be a major contributor to inconsistent performance. For the same reasons that someone who is 6’5” wouldn’t walk into a men’s clothing store and buy a suit off the rack, golfers need to make sure that the golf clubs they buy are suited to their body type and size.

What does playing the right length driver shaft do?

Playing the right length Driver Shaft will increase your accuracy!

How long is a driver's shaft?

With the advancement of driver head technology, shafts don’t have to be as long as they are. A standard driver’s length now is about 45 inches.

What is a tip stiff shaft?

Some shafts are ‘tip-stiff’, meaning the tip section near the clubhead is stiffer in relation to the rest of the shaft. Or ‘grip-stiff’ which keeps the upper end of the shaft firm to help reduce spin.

Why do you need torquing shafts for a high speed swing?

It is very helpful for your miss-hits and for when you make a bad swing. If you’re swinging badly at a high velocity then you need all the help you can get to keep the face as square to the ball as possible.

What happens if your golf shaft is too light?

A shaft that is too light will cause you to swing out of control and lose consistency. You may lose feel too, which is very important when hitting the driver since it is the longest club in your bag.

What is torque in golf?

Torque refers to how much the shaft twists. It’s the least talked about feature but still an important one to club fitters. High torque shafts can twist easily, and low torque shafts are resistant to twisting.

How much does a driver shaft cost?

It always comes down to price at the end of the day and we are always looking for the best deal. A driver shaft can cost anywhere from $40 – $300.

What is driver fitting?

It involves the customization of all the major aspects of a driver that can affect the playability, feel and overall performance of the club. Our trusted advisors use industry-leading TrackMan* technology to elevate your game. TrackMan utilizes groundbreaking dual radar systems to analyze every aspect of your swing. This precise data is then used to find the best fit for your driver.

What is clubhead speed?

Clubhead speed is a product of good swing tempo, balance, shaft weight, flex, aerodynamics and weight distribution. More clubhead speed means higher ball speeds, and that means longer drives. We match the driver to your swing and find extra ticks of clubhead speed for those coveted extra few yards.

What is a driver golf club?

The driver is typically one of the most fitted and often replaced clubs, and is usually the most-expensive club in one’s bag. A properly fit driver can have a dramatic effect on distance, accuracy, consistency and confidence; maximizing the opportunity for optimal results. When looking at driver fitting many principles from an iron fitting carry over, but there are some unique aspects to the driver (e.g. some elements of adjustability).

How does shaft fitting affect golf?

Players have a vast array of choices when it comes to shaft fitting. Various combinations of weight, flex, and torque can affect the way a shaft feels and performs. Ultimately these shaft properties can not only have a big effect on how a driver feels as it is swung and as it impacts the ball, but also can influence the trajectory that can be achieved with a given model.

What is loft in golf?

Loft is the angle of the clubface relative to a vertical line perpendicular to the ground. Loft has considerable influence on the launch angle and spin rate of a golf ball, although other factors such as shaft type and model also influence launch conditions. PING drivers are offered with different lofts to fit players of varying swing speeds, swing tendencies and ball-flight preferences.

How does length affect golf?

Altering the length of a driver can have a significant effect on performance. As length is evaluated, keep in mind the trade-offs in performance that can govern changes in driver length. Table 2 displays how altering length while maintaining a constant swingweight can affect performance. For example, for a 1-inch increase in length, the carry distance increases an average of 4 yards. As a general rule, an increase in length can increase distance, but will usually lead to a significant decrease in accuracy. There is also a point with most players where increasing length will lead to shorter distances due to poorer contact, though this point is highly dependent on the player.

What is the average driver length for a ping pro?

For PING pros on the PGA and European tours, driver lengths range from 44.25″ to 46″, with an average of 45.25″. On the LPGA Tour, lengths range from 44.5″ to 48″, with an average of 45.25″.

How does swingweight affect performance?

As with irons, overall swingweight can affect performance by influencing the way a club is delivered. In general, heavier swingweights and total weights tend to fight a miss to the left, while lighter clubs tend to fight a miss to the right. Most equipment manufacturers have dialed in swingweights for their drivers that provide the best performance for the overall population, but weight and balance should be part of the fitting discussion.

Why is tee height important?

Tee height is important to optimizing trajectory and distance with the driver. When teed too low, the ball typically launches lower with excessive spin. When teed too high, the ball may impact high on the face, leading to a higher launch angle than desired with insufficient spin. Hitting too high or low can also significantly affect ball speed. Typically, an average tee height that places the equator of the ball even with the top edge of the driver face works best for most. Particularly in an indoor environment, it is important to ensure that one can adjust tee height and achieve a sufficient tee height during a fitting. If you are not comfortable with the tee height during the fitting, be sure to discuss this with your fitter.

How fast does a swing increase with a longer driver?

On average, the entire test group’s swing speed increased with the longer driver, increasing from 102.8mph to 103.8mph.

Why fit a 43" driver?

One example is from a guy I fit not too long ago. The player was a strong guy, about a 15 handicap with some consistency issues. Anything longer than 43” resulted in erratic impact all over the face, with erratic ball flight to match. As soon as he had a 43” heavy, stiff driver in his hands, the contact on the face became much more consistent so did his ball flight. His launch conditions (speed, launch angle, spin rate, spin axis, etc…) improved dramatically as well. His club head speed (which is the reason that a person would go to a longer driver) was exactly the same as a 45.5” driver. Despite losing 2.5” of length, the speed was identical. This is a common occurrence during fittings on the TrackMan machine.

How does dispersion affect golf?

Dispersion tells us how tight the groupings are. If a player hits the ball on average 15 yds left of the target line, but does it consistently and repeatedly, then that player will have a smaller dispersion pattern. The smaller the dispersion pattern, the easier it is to play and correct for tendencies. So the player who misses the target line 15yds to the left consistently can compensate by aiming 15 yds to the right and still be a very good driver of the golf ball. We also wanted to see what kind of impact length had on the dispersion pattern.

What are the three variables that determine driver performance?

Driver performance is based on three main variables: (1) Distance, (2) Accuracy/ Dispersion from the intended target , and (3) Face Impact . The goal of a driver is to consistently hit the ball as far as possible and at the intended target. This is how we determined the effectiveness of the two different length drivers.

What is the role of the launch angle in golf?

Launch angle plays a primary role in how much spin we need on a golf ball. Across all swing speeds, the lower a ball is launched, a higher spin rate is needed to help keep the ball in the air. The higher a ball is launched, a lower spin rate is needed to maintain optimal trajectory. In a perfect world, we like to see a high launch angle with a spin rate that’s just high enough to maintain that trajectory.

Why is the 44.5 driver longer than the 45.5?

Those two reasons happen to be the same reasons why the 45.5” driver carried longer. The lower launch and lower spin rate from the 44.5” driver created a more penetrating (flatter) ball flight.

How long is a Cobra driver?

Drivers nowadays are being made longer and longer. Cobra is actually releasing a 48” driver called the Long Tom for 2012. The average length of a driver 5 years ago was approximately 45” long. In 2011, the average driver length of the brands that we stock is 45.73”, and that number is only going to go up in 2012. In concept, going to a longer shaft is a great idea since in most cases the longer the shaft the faster the head will travel.

Driver Fitting

At PGA TOUR Superstore, we have the latest fitting tools and technologies to help you find the best driver for your game.

Every golfer can take advantage of the advances in driver technology

At PGA TOUR Superstore, we have the latest fitting tools and technologies to help you find the best driver for your game.

What happens if your driver shaft is too stiff?

Generally speaking, a driver shaft that’s too stiff will cause shots to launch too low, with too little spin and low peak heights. A shaft that’s too weak, on the other hand, may cause shots to spin too much, fly too high, and widen dispersion patterns.

What shafts do you need for a slow swing?

Slow swing speeds will generally require softer-flex shafts, while high swing speeds need stiffer shafts; due to variations in swing patterns, however, swing speed is only one portion of finding the right shaft. Briand’s recommendation is to use your current driver shaft as a baseline.

What does low torque mean on a shaft?

5. Torque. A low torque measurement means that a shaft has greater resistance to twisting, while a high torque measurement means it will twist more easily.

Why do golfers buy shafts?

The problem is that buying a shaft because someone else uses it is like buying a size 44-long jacket because that’s what Tiger wears. It can be counterproductive to your game to purchase a shaft that isn’t right for you.

What happens if you have a longer shaft?

As Briand says, a longer shaft will cause a less consistent strike on the face, and the golfer will tend to hit the ball closer to the heel. A shorter shaft, on the other hand, will cause a more consistent strike pattern, but impact location will tend to be on the toe. A golfer’s physical size, arm length, swing speed, consistency, ...

How many inches is Rickie Fowler's shaft?

A look at Rickie Fowler's fairway wood shaft, which measures 42 inches with 0.5 inches of tipping.

Does tipping a shaft change the bend point?

Remember, though, that tipping a shaft will change the bend point, and it’s also irreversible, so make sure you know the purpose behind tipping your shaft. 2. Weight. The weight of a shaft has a similar correlation to performance as flex.

How to measure for golf clubs?

To find the right size clubs for your body, use recent height measurement to determine the proper angle for your clubs. It usually helps to have another person measure, so you get the most accurate measurements possible.#N#Measure your basic height from the top of your head to the bottom of your feet. Stand up as straight as possible to get the measurement. You don't need to be in your swing stance.

How to improve your golf game?

If you're not sure of your handicap, a basic description of your skill level can go a long way in helping the fitter match you with the right kinds of clubs that will help improve your game.

What shafts do you use for a swing?

In general, people with faster swings prefer stiff shafts on their woods and iron shafts on the irons. People with slower swings are more likely to prefer flex shafts on the woods and graphite shafts on the irons.

How to remove steel shafts?

All types of shafts need to be tip prepped, ferrules applied and then epoxied to the head. It is not expensive to have this done by someone who is experienced and already has the necessary equipment (recommended) unless you would like to take club building up for a hobby and purchase a lot of equipment like I did and the wife does not appreciate.

How to test if a golf club is shortening?

At the grip end. You can test the results before cutting the shaft by choking up on the club by 1 inch to see if shortening the club is going to improve your game.

How to buy name brand golf clubs?

If you are considering purchasing name-brand golf clubs, go to a dealer for a professional fitting. The price of custom-fitted clubs will run much higher than a standard boxed set off the shelf.

How to choose a golf club size?

Go with what feels right. There's no ideal size. Even the "custom" numbers are less important than what you feel comfortable playing. If you're going to invest in an expensive set of clubs, make sure you enjoy playing with it.

Flex/Frequency

See all 4 steps on www.wikihow.com

Length

Weight

Kickpoint

• The length of your driver shaft will help you control the directionof the ball more. A shorter shaft will give you better accuracy. A longer shaft will give you more distancebut will cost you some fairways in regulation. You will sense a theme in this article that the name of the game is to find balance, and that includes length. There is a perfect...

See more on mygolfheaven.com

Torque

Cost

Conclusion