Slide the extender into the hole and rotate it as you push the extender into the shaft to spread the epoxy. Tap the butt end of the club lightly on the floor or another hard surface, to secure the extender in place. Wipe away any excess adhesive with a cloth.
Full Answer
Can you extend a golf shaft?
Extending a golf shaft is a useful technique to have if you are buying used clubs, or if you are experimenting with different club lengths. If you know how to cut a golf shaft or how to extend it, you don’t ever have to worry about purchasing the correct length of clubs on Ebay or other used club marketplaces.
How do shaft Extenders affect the weight of the club?
The total weight of the club will increase equal to the weight of the extender and epoxy as well. The club’s balance point will move toward the grip end as well due to the longer length of the club. VIEW THE GRAPHITE SHAFT EXTENDERS IN THE “HOW TO INSTALL GRAPHITE SHAFT EXTENDERS” VIDEO BELOW 1. Never extend a steel shaft more than 2″.
How to extend a graphite shaft?
2. Always use either nylon or plastic extensions to extend a graphite shaft. Using a steel shaft extender will create a shear point where the extension is made, causing almost certain shaft failure. 3. Always epoxy the extension in place, do not rely on a pressure fit.
Can I use a steel shaft extender to extend a shaft?
VIEW THE GRAPHITE SHAFT EXTENDERS IN THE “HOW TO INSTALL GRAPHITE SHAFT EXTENDERS” VIDEO BELOW 1. Never extend a steel shaft more than 2″. Any more may cause premature failure due to stress where the extension is made. The only exception would be putter shafts. 2. We recommend using a steel extender to extend a steel shaft.
How do you fix a loose golf ferrule?
3:458:52LOOSE FERRULE / The EASIEST Golf Club Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipUnder that stream of water. For say 20 seconds something like that maybe it takes a little longerMoreUnder that stream of water. For say 20 seconds something like that maybe it takes a little longer maybe takes a little less depending on the feral depending on the temperature of the water.
How do you install a golf shaft extender?
0:562:35How To Install Graphite Shaft Extenders - YouTubeYouTubeStart of suggested clipEnd of suggested clipInto the butt end make sure it's nice and snug. And then we're ready to do our next assembly stageMoreInto the butt end make sure it's nice and snug. And then we're ready to do our next assembly stage which is to epoxy it into the shaft. Just want a good even coating.
How do you fix a loose driver shaft?
1:5514:23LOOSE GOLF CLUB HEAD / How To Fix - YouTubeYouTubeStart of suggested clipEnd of suggested clipAhead put a little bit of epoxy. In that space between the ferrule. And the hosel squeeze them backMoreAhead put a little bit of epoxy. In that space between the ferrule. And the hosel squeeze them back together wipe it clean let it dry.
What kind of glue do you use for golf clubs?
Golf club heads are attached to the golf shaft with epoxy glue. Epoxy is a thermosetting polymer that is a high strength adhesive. Two parts, the resin and the hardener, are mixed together to create a chemical reaction that cures the epoxy to hardness.
Do golf club extenders work?
Lengthening the shaft increases the swing weight, which makes the club head feel heavier. It may even make the club too heavy for you, which will slow down your swing speed and actually reduce your distance.
Do shaft extensions work?
Graphite shaft extensions...they work! I purchased these to add some length to a set of graphite shafts. They worked but had to do a little bit of sanding to make them fit. But this would be preferable to having them start out a little loose.
Why is my golf shaft rattling?
A rattle in the shaft is typically caused by a broken chip of epoxy. It can also be caused by loose material that may have been added for swing weight. A rattle in the shaft is typically caused by a broken chip of epoxy or rust. It can also be caused by loose material that may have been added for swing weight.
How much does it cost to re shaft a golf club?
The average cost to reshaft your golf clubs is $24 per club plus the cost of the shaft and grip. A new iron shaft and grip can range between $10 and $95 while a new driver shaft and grip can range between $18 and $440. The majority of the cost comes down to what type of shaft you want and what grips you like.
How do you fix a rattle on a golf shaft?
The simplest solution to fix a rattling sound in your shaft would be to remove the grip from the golf club. After removing the grip, you should be able to remove the particles, therefore stopping the rattling noise. Sometimes, even small pieces of rock or stones could have gotten inside the shaft during a game.
Can I use JB Weld on golf clubs?
Jb Weld can be used on both metal and plastic golf clubs. It is non-toxic and safe to use on most surfaces.
How do you glue golf club shafts?
3:396:41HOW to FIX your GOLF CLUB if the HEAD comes off | Easy TutorialYouTubeStart of suggested clipEnd of suggested clipAnd just mix that around into the glue. And onto the shaft. Then i'm just going to take the headMoreAnd just mix that around into the glue. And onto the shaft. Then i'm just going to take the head that i'm gluing back on and i'm just going to pour a load of glue. Into the bottom of that.
Will any epoxy work on golf clubs?
Unless you have to, do not use non-golf specific epoxies. Use epoxy designed for golf as they usually have higher peel sheer strengths and elastic properties that hold well during impacts specific to a golf club hitting a golf ball.
How much does it cost to extend golf clubs?
How much does it cost to lengthen golf clubs? On average, it will cost $8-9 per club plus the cost of a new grip to lengthen your clubs. If you're looking to save your old grips, you'll avoid the cost of new grips, but you'll have to pay a save grip fee of around $10 per club.
How do you use universal shaft extensions?
The Universal Shaft extensions will work with almost any steel or graphite shaft. After applying a little epoxy, insert the extension into a shaft, force the provided tapered plug into the extension until the extension expands to fit the ID of the golf shaft. Its that simple.
Can you extend a graphite driver shaft?
Never extend a graphite shaft more than 2″. Any more may cause premature failure due to stress where the extension is made. 2. Always use either nylon or plastic extensions to extend a graphite shaft.
Series Navigation
Extending a golf shaft is a useful technique to have if you are buying used clubs, or if you are experimenting with different club lengths. If you know how to cut a golf shaft or how to extend it, you don’t ever have to worry about purchasing the correct length of clubs on Ebay or other used club marketplaces.
Materials Needed
Extension (You could also use an old golf shaft) Make sure you purchase the right size extension. You need to know the “butt diameter” of the shaft that you are extending, and purchase the extension that matches. Here is a database of shafts.
About the Author: Zach Gollwitzer
Hey!! I'm Zach, the founder of The DIY Golfer. I created this site in 2015 while playing D1 collegiate golf to help myself understand the game of golf better and improve as a player. Fast forward a few years, and it has become much more than a journal.
How to swing a golf club from your lead thigh to your trail high?
Focus on the journey of the club handle. You want to swing the handle from your lead thigh back to your trail high, at which point the club shaft should be parallel to the ground. Before the handle reaches your trail thigh, the logo on your golf glove should point down at the golf ball.
How far does a golf ball curve when hitting a fade?
When you hit a fade, the golf ball curves only about 5-7 yards from the target line. When you slice it, the golf ball curves farther . . . around 15 yards to the right of the target line. If your ball flight resembles a peeling banana, you’re dealing with a slice.
What is a slice in golf?
For a right-handed golfer, a slice is a golf shot that curves dramatically toward the right. A slice is never controlled and never intentional. It takes you off course and adds strokes to your game. Trust us. You enjoy a round much more when you learn how to fix a slice in golf.
What is the shape of a golf swing?
Your golf swing travels in a circle shape. This circle is vertical, but it’s not straight up and down. If your swing shape is a hula hoop, it’s a hula hoop that leans in toward your body just a bit. Because of this lean, the direction of your swing path changes after you hit the low point.
How to get a square face in golf?
Place an object—a tee, a towel, anything—just to the right of your target path. Take your golf shot. Finish with the butt end of your club pointed at the object you set out. This drill teaches you how to release the club at the right time to deliver a square club face.
Where does the swing path go in golf?
In to out: The swing path travels toward the right of the target (if you’re right-handed) Out to in: The swing path travels toward the left of the target. Straight down the line: The swing path travels directly toward the target. The combination of these two factors can really make or break your shots.
Is it hard to fix a slice in golf?
Most amateur golfers are dying to know how to fix a slice in golf. It’s an incredibly common problem. But not because a slice is hard to fix. It’s because most golfers don’t know what to do to get rid of this miserable shot once and for all. The truth is, the slice is the easiest shot to fix.
This is the easiest DIY repair for one of the most annoying golf club issues
One of the most annoying things that can happen to a golf club is also one of the easiest things to fix—a rattle in the shaft.
WATCH: Talking TaylorMade Spider GT putters with Bill Price
BK talks with Bill Price, TaylorMade’s senior director of putters, about the new Spider GT putters.
Clement: How to stay with your golf shots and stop swaying
Nothing better than being able to stay with your golf shots and create some powerful leverage to apply some compression through your golf shots like smashing through a door with a battering ram! Get a GOLF SWING WITH LAG, POWER AND SPEED!
Clement: Beat the shanks for good
Editor’s note: Shawn is shouting in his caption, so you know it’s good.
