
How to repair cracks on a plastic golf cart roof?
- First of all, drill out the cracked area in ‘V” shape and insert a plastic weld on the rear. ...
- If you have a cart roof made up of ABS plastic, you must search ABS glue available with most plastic model kits. ...
- With the ABS sheet used for backer strips, you can use them behind cracked surfaces to stiffen the glue. ...
Full Answer
How do you fix a crack on a golf cart body?
1 Clean the crack on the golf cart body with mineral spirits 2 Dry, prime and lightly sand the surface 3 Glaze the surface using a product such as Bondo 4 Alternatively, if the crack is not on the gel coat but the cart body, you will have to paint it with a resin/hardener mix.
How do you clean an old golf cart?
Wash the soap off using cold water from a hose. Wipe the cart using a towel and let it dry completely. Dismantle removable parts like bumpers, roof, trim and parts of the frame that don’t require painting.
How do you seal a fiberglass golf cart body?
Spray the acrylic base coat on the fiberglass body. Apply three to four coats taking care to allow each coat to dry for about 20 minutes. Apply a couple of coats of a sealant or clear topcoat sealer with half an hour drying time between each coat. Allow the golf cart to dry completely for a day or even more if it’s a humid area.
How do you fix a broken gel coat on a cart?
Fill it from the front and coat the inside. Peel off the inside tape. Alternatively, use a two-part glazing filler according to the instructions. Alternatively, if the crack is not on the gel coat but the cart body, you will have to paint it with a resin/hardener mix.

How do you repair a fiberglass golf cart?
2:2040:50Fiberglass repair to the front of my Club Car DS Golf Cart - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe might put some slices in it to we're just trying to make some backing material that we couldMoreWe might put some slices in it to we're just trying to make some backing material that we could fiberglass over the top of um we'll rough it up we'll rough up the aluminum after it's cut out and fit.
How do you take the roof off a golf cart?
0:532:02EZGO RXV Golf Cart Sun Top Removal How-To - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing the 15 millimeter wrench hold the head of the bolt in place use your socket and ratchet removeMoreUsing the 15 millimeter wrench hold the head of the bolt in place use your socket and ratchet remove the nut off of each bolt. Once these are done you can remove the. Top.
What kind of paint do you use on a golf cart roof?
When painting a golf cart roof, you will need to use an acrylic spray paint. Any other type of paint is not going to stick to the golf cart for an extended period. The excellent news about acrylic spray paints is that they are very easy to find at a local hardware store or home improvement store.
How do you Bondo a golf cart?
4:1517:46Golf cart hole repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipBehind the holes and we put some painters tape that'll give it a nice surface for the bondo to stickMoreBehind the holes and we put some painters tape that'll give it a nice surface for the bondo to stick to once the bond goes in those holes. See they're fairly small holes.
How to repair a crack in a golf cart?
You can try the following options to repair cracks on a plastic golf cart body. Drill through the crack in a V shape and put a plastic weld on the rear. Fix some plastic tape on the front side so that the weld doesn’t push through. Drill the crack at the end so that it doesn’t become bigger.
How to restore a golf cart?
Steps. Apply some dish soap all over the golf cart and wash it using a hose fitted with a fine spray nozzle. Use a microfiber cloth to spread the dish-wash soap uniformly, both inside and outside the cart. Take some water in a bottle with a spraying mechanism and spray on the surface that has to be restored.
How to paint a dark cart?
Apply a thin coat of plastic primer spray paint on the surface to be painted. You might need an extra coat if you’re planning to give your dark colored cart a light color. In this case, give a drying time of about half an hour before you apply the second coat. Paint the cart using acrylic or plastic-fusion paint.
How long does it take for acrylic to dry on fiberglass?
Spray the acrylic base coat on the fiberglass body. Apply three to four coats taking care to allow each coat to dry for about 20 minutes. Apply a couple of coats of a sealant or clear topcoat sealer with half an hour drying time between each coat.
How to clean a golf cart with soap?
Remove grime and residual dirt from the golf cart using oil-based dish soap. Wash the soap off using cold water from a hose. Wipe the cart using a towel and let it dry completely.
What is a golf cart made of?
The body of a golf cart is primarily made of sheet steel, fiberglass or sheet aluminum. The frame is generally made of steel while tires, foam seat cushions and steering mechanisms are made of rubber, vinyl and metal. Parts like suspensions, drive trains, motors and brakes use metal. The 1993 model Club Car used an indestructible thermoplastic ...
How to avoid spray painting windows?
Line the outer edges of windows to avoid spray painting them. Rub the cart body cart in a circular pattern using a 120- to 140-grit sandpaper to make the paint application easy and retain the paint on non-porous surfaces. Brush off the sanding dust with a microfiber cloth.
