If you want to drive a golf ball straight, try adjusting how you tee the ball and how wide your stance is. If you want to get some distance with your swing, tee your ball high in the ground and stand so that the ball is aligned with your left toe. You should also keep your stance wide to get more power in your swing. If you are going for accuracy on a shorter drive, narrow your stance and tee the ball about halfway into the ground for more control.
Full Answer
How do you drive a golf ball straight?
It may sound strange, but it will actually help you to not use a tee. This method takes spin off the ball, allowing you to hit it straight. Step 1. Use your foot to loosen dirt on the tee box and...
How to tee up a driver in golf?
· Golfing pro Rickard Stronghert shows you how to hit long straight drives. Related video: 6 golf tips everyone should know: http://bit.ly/2pIREiXSubscribe! ht...
How to swing a golf club correctly?
· By gripping the golf driver slightly lower you will be able to have more control and increase the probability of driving the golf ball straighter. You may lose some power from your drives but what you lose in power you should make up for in control and accuracy, especially by adopting a neutral golf grip.
What is the best way to play the game of golf?
· If playback doesn't begin shortly, try restarting your device. ... ...
What are the components of golf?
Essentially the three components to a game of golf are the tee shot, iron play and the short game. If any one of these is lacking, you're not going to be able to score as low as you'd like. The tee shot sets up the rest of your game, so if you're not hitting your driver straight, be prepared for a long round.
How to get a golf ball airborne?
Step 1. Use your foot to loosen dirt on the tee box and mound it up so it creates a natural tee for your ball. The earthen tee should be low enough to relieve the spin yet high enough to get your ball airborne.
Why are straight drives important in golf?
This is because straight drives in the middle of the fairway mean an increased likelihood of reaching the green in regulation.
How to get more control in golf swing?
Firstly, set up your golf stance so that you are taking a narrow stance which is just beyond shoulder width. By doing this you will get more control with your golf swing than if you were to adopt a wide stance which allows for a bigger swing motion. Secondly, you will need to stand so that the golf ball is slightly inside of your left toe ...
Why is it important to hit your driver accurately?
Why Is It Important To Hit A Driver Accurately? Hitting your driver accurately will make your life easier on the golf course and ensure you are always playing from fairway instead of longer grass. As I’m sure you’re aware, driving accuracy is so important.
Why do you have to grip the golf driver lower?
By gripping the golf driver slightly lower you will be able to have more control and increase the probability of driving the ball straighter. You may lose some power from your drives but what you lose in power you should make up for in control and accuracy.
What are the disadvantages of driving long distance?
However, a disadvantage that long drivers have is that if they are unable to drive straight consistently then they heavily rely on their short game to bail them out of trouble and lower their scores despite their faster clubhead speed.
How far can you drive the ball?
There are different ways to drive the ball depending on your aim. If you are looking to drive the ball farther such as 300 yards like the pros you will take a different approach to somebody looking for more control and accuracy.
What is the first step in a teeing up?
The first step involves the teeing up of the ball. For longer hitters who have more leeway with their accuracy they will tee the ball high to maximize distance and the loft that they can get on the ball.
How to hit golf balls?
1. Grip - you do not want your hands turning too much towards the target. We want to strengthen your grip, or turn it away from the target so you can see more knuckles (2:10 on the video to see how to do this). Change the grip, then hit golf balls. It might take some practice, but this is the first stage. 2.
How to prevent hooks in golf?
1. Grip - so to prevent those hooks, we want to reverse the entire process for curing a slice. The right hand is likely too much under the club, so you need to move your hands towards the target. Rather than have maybe four knuckles on the lead hand showing, we want to see two or three.
Why do you have to let the golf ball release?
Reduce the pressure on the back of the golf ball - you need to let the club release because you are holding on way too much. When you apply too much pressure, the handle gets very high and you get underneath causing you to either block it to the right or flip it way left.
What are the three things that golfers need to look at when it comes to mechanics?
As with your irons, there are three things that we need to look at when it comes to mechanics: Stance and setup. Ball position. Swing plane and contact.
How to swing an iron shot?
First, you want to think of widening your stance a little past shoulder width while putting a little more weight on your back foot rather than your front. Having a wider base will keep you firmly planted on the ground and keep your weight from swaying while the added weight on your back foot will help with power production. Keep a square stance with your feet perpendicular to the target and parallel to the club head. Bend at your waist and angle your back at a comfortable level (standing up too straight can result in too flat of a swing plane and a lot of hooked shots). I personally don’t like to hang my arms down like I do for an iron shot. Instead I prefer to think of them as almost an extension of the club because it gives me a longer swing arc (longer arc, more time to build up momentum, more power) but that is not something that will work for everyone. If you look to the right you can see a stance that is fully put together.
What is the key to hitting good tee shots?
The key to hitting good tee shots, is quick, quiet mechanics and that is exactly what we’re going to talk about today. The words quick and quiet mechanics each play a part in the power and accuracy of your drives. But before you can be quick, you need to be quiet. So lets start there.
Why do we play the ball forward?
The reason we play the ball forward is to facilitate a sweeping motion which we can use with the driver because the ball is on a tee. This means we strike the ball after the swing has bottomed out which leads to extra height on our ball flight, and more distance on our drives.
What does "being quick" mean in golf?
Being quick does NOT mean, trying to swing harder using your arms (especially during the back swing). It does not mean you should start your downswing before you have come to a rest at the top of your swing. And it most certainly does not mean you should grab the club as hard as you can and wail away at the ball.
How to know if you've correctly rotated your hips?
You’ll know you’ve correctly rotated them if your belt buckle is pointed at the target area and your right shoulder has cleared where the ball was positioned. Anything besides this means there was either too much or too little rotation.
What is the importance of back swing?
Once you get to the top of your back swing, it’s important to bring your entire body to a stationary point. This will ensure that, as you come back down, all the parts of your swing (hips, shoulders, arms, etc.) are working together in the correct order.
How to swing a golf club with a trail hand?
Next, put your trail hand on the club. When you do this, your spine will naturally tilt back away from the target and put you in the correct position to make a solid swing.
How to make a solid swing?
Spine tilt. Once you get in this position, grip the club in your lead hand. Your shoulders should be level and square at this point. Next, put your trail hand on the club . When you do this, your spine will naturally tilt back away from the target and put you in the correct position to make a solid swing. 4.
How to tee the ball in a stance?
You also want to tee the ball up in the forward portion of your stance, just inside the lead heel. This will allow you to catch the ball at the end of your swing arc when you are hitting up on the ball. To get this position, set up with your feet together even with the ball and then taker a wide step back with your trail foot. This will put you in a nice, wide base to make an athletic and powerful swing.
Why is it important to nail down the fundamentals of a driver?
Because of this, it is extremely important to nail down the fundamentals of a driver so you can wield the big stick with confidence.
Where should the ball sit when teeing up?
You typically want about half the ball to sit above the face of the driver when you tee it up. This makes is easier for you to hit up on the ball and elevate the ball off the tee. 2. Stance. You also want to tee the ball up in the forward portion of your stance, just inside the lead heel.
Do you need to tee the ball up?
Before you even think about your swing, you need to tee the ball up. This might seem simple, but it is a key for hitting the driver consistently as you want to have the ball teed up at a uniform height every time.