how to get fit for golf clubs

• Swing the clubs Swinging a standard-length club is an essential step in fitting golf clubs. ...
• Apply tape to the bottom of your clubs This step determines where your club will make contact with the ground. ...
• Identify your handicap Finally, identifying your handicap will allow you to match with the right club type. ...

Full Answer

Where to get custom fit golf clubs?

More offset in golf clubs will simply give the face more time to “square” at impact and helps golfers (right-handed) reduce misses to the right. Lie angle: Ensures the club sits square on the ground to prevent the heel or toe of the club from digging-in through impact. The loft angle and lie angle work together to produce proper, accurate shots.

What are the different ways to grip a golf club?

You'll begin by hitting your current clubs to establish a baseline, then the Fitter will provide new club head and shaft combinations to hit, addressing grip, weight, shaft flex and length, and more to optimize your ball speed, spin rate, launch and descent angles providing you with the most consistent and accurate shots for your game.

Should you consider custom fit golf clubs?

Jan 12, 2015 · Getting fit for the right clubs may be one of the easiest ways to take strokes off your game. Kiel Christianson/GolfAdvisor Ed Grabowy, who operates the GolfDoctor.com, says the shaft is the most important component of club fitting. Courtesy of GolfDoctor.com You're determined that 2015 is going to be your breakthrough year on the golf course.

How to buy beginner set of golf clubs?

Here’s a comprehensive step-by-step guide on how to fit for golf clubs that I personally recommend: Measure your height with shoes on Measuring your height with your shoes allows the fitting to be as precise as when... Measure the length between your wrist and the ground Measuring your wrist-floor ...

Is it worth getting fitted for golf clubs?

Is it worth getting custom fit golf clubs? The simple answer is yes, it's definitely worth getting custom fit golf clubs. If you were to look at the back of a typical set of off the shelf clubs, they would usually have various markings on them as well as loft and lie angles.

How much does it cost to get custom fit for golf clubs?

If you want to get your entire bag fitted, the average cost will be $275. If you want to get an individual club fitted (driver, wood, irons, wedges, putter), it'll cost you somewhere around $100 each....How Much Does It Cost To Get Fitted For Golf Clubs.StorePriceAverage CostIndividual club: $100 Full bag: $2757 more rows

Can you fit yourself for golf clubs?

Golf clubs come in a variety of sizes; although many of them are a standard size, others can be custom-made in accordance with your body size, grip and swing. It's a fairly simple process to fit yourself for the proper-sized golf club. Doing so will allow you to attain optimum performance.Oct 13, 2009

How does getting fit for golf clubs work?

After the interview process, the fitting begins by analyzing the golfer's performance with their current set of clubs. For woods, drivers, and irons, a fitter will observe the player with usage of a launch monitor to quantify specific aspects of ball flight or club delivery for further analysis.Sep 19, 2018

Can you get irons fitted after buying them?

This is a great question because it addresses something many people don't think about. And the answer is absolutely yes, it's worth getting fit for clubs you already have. Especially if you're 5-foot-5, since a stock set of clubs isn't likely to have the proper lie angle for you.Oct 4, 2019

How much is a golf fitting UK?

How Much Does a Golf Club Fitting Cost? Is it Worth it?CLUBSUSAUKFull bag$250 – $600£60 – £300Driver$50 – $175£30 – £150Fairway Woods / Hybrids$40 – $150£30 – £100Irons / Hybrids$50 – $175£30 – £1752 more rows

What size golf clubs do I need for my height?

1. Measure Your Overall Height (i.e. “static” fitting)OVERALL HEIGHTGOLF CLUB LENGTH ADJUSTMENTS5'7″ to 6'1″standard length in inches6'1″ to 6'2″plus 1/4″6'2″ to 6'4″plus 1/2″6'4″ to 6'6″plus 1″7 more rows

What golf clubs should a beginner get?

For your first golf clubs, we recommend buying a beginner set of clubs that include a driver and 3-wood, odd-numbered irons (3, 5, 7, 9) and a putter. Apart from the basic decisions between men's and women's clubs and right or left-handed clubs, you might have a choice between steel and graphite shaft clubs.

How long does a club fitting take?

As a general rule a golf club fitting should take between 45 minutes and 3.5 hours. Full bag fittings take the longest but ittings can also be done in club 'groups' such as 'wood' or 'iron' fittings and these take 1.5 to 2 hours. Individual club fittings take a minimum of 45 minutes and can take 1 to 1.5 hours.

Should you get golf lessons or club fitting first?

If you really want to improve, there's a lot of value in properly fitted equipment before, during and after any swing changes you make from golf lessons. So if you've been wondering whether you need lessons before fitted clubs, it's not necessary. The combination of both is really the best way to shoot lower scores.Sep 14, 2018

Do I have to buy clubs after a fitting?

Usually, the cost of the fitting is subtracted from the cost of the clubs if you buy them. If you don't like any of the clubs you try, then don't buy anything. You will likely have to pay a moderate fee for the fitting, but the results are yours to keep.

What size clubs do I need?

Your clubs should complement your height, wrist-to-floor length, ability and swing speed. By buying straight off the shelf, you'll miss out on the benefits the clubs were designed to offer. When it comes to what length golf clubs to use, it is all about ensuring they are correct for your height and posture.Dec 17, 2021

What are the factors to consider when selecting a golf shaft?

There are three big factors to consider with your golf shafts: flex, length, and torque. Here’s how each of those works with your swing. Flex: Golf clubs are rated by five different types of flex, and each flex is designed for a specific "load” factor. “Load" is a result of Club Head Speed (CHS) within a certain time frame.

Why is a bigger grip better for golf?

A lot of golfers now prefer a slightly oversized grip. A larger grip can help you keep the lighter pressure on the club, allowing you to swing fast er to generate more speed and distance . That lighter pressure can also reduce fatigue in the hands, making larger grips good for golfers with arthritis or tendonitis.

What is draw bias in golf?

This is the practice of repositioning the clubs weight toward the heel, which will noticeably reduce a player’s miss to the right or will help to promote a “draw” shot that will curve to the left (for right-handers).

How tall is the average golfer?

The average American male is 5’9”-5’10”, so any golfer from 5’8”-5’11” can typically be fit into standard length clubs. As a general rule, every two inches in height above or below standard height means you’ll need to add or subtract a half inch to or from your club’s standard length.

What happens if your golf shaft is too stiff?

If a shaft is too stiff, you’ll swing too fast and won’t produce enough spin. If It’s too soft, you can put too much spin on the ball and lose distance and consistency. Length: Having the proper length of your clubs is essential to making a good swing.

What is grip in golf?

The grip is the player’s connection to their golf club. It has to feel right in their hand. That’s why this important piece of club fitting relies so much on personal preference.

Why do you need custom clubs?

If you’re above the beginner level, you’ve gotten a little better and gained more experience. Custom clubs can help make the most of the tools you have. Pairing the correct clubs with your swing can help you fill in those gaps and eliminate poor shots on the course, helping you realize your potential.

How long does it take to fit a golf club?

In terms of what to expect, Grabowy said that fitting a player for a full set of clubs will take about two and a half hours and include "educating" a player about his or her needs. The fitting process also remains pretty much the same for woods, irons and wedges.

Where does Chris Wallace live?

He lives with his wife in Pinehurst, N.C.

Who is Ed Grabowy?

Grabowy is certified as an Advanced Professional "Class A" Clubmaker by the Professional Clubmaker's Society and a Professional Clubmaker by the Golf Clubmaker's Association.

What is flex in golf?

The flex of your club is the “firmness” that the shaft provides to your club. The firmer shafts are best for players with stronger hits or fast swings. And so the appropriate flex of your golf club depends on your strength and skills. Flex is especially essential when you’re using woods, long irons, and hybrids.

How long is a golf iron?

Golf Iron. To start, the 1-iron club is typically around 40” in length, while the 9-iron club is around 36” in length. In short, each iron club number decreases half an inch in length. Also, the standard iron club length for men is usually an inch longer than the standard size for women.

What is OnTheGolfGreen.com?

OnTheGolfGreen.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to products on Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc, or its affiliates.

What is the difference between graphite and steel shafts?

Do note that shafts made from graphite and steel differ in length. Graphite shafts are typically longer than steel shafts, with 1” longer graphite woods and 0.5” longer graphite irons.

How to measure wrist length?

You don’t need to stand in your swing stance. When measuring, stand as straight as possible with your back on the wall and your arms hanging at your sides.

How to get better at golf?

Doing so will allow you to attain optimum performance. Put on your golf shoes. Have a friend or a person at a golf shop measure the distance from one of your wrists to the floor with a tape measure. Make sure you're standing up straight and your arms are held straight down at your sides. Repeat with the other arm.

Who is Stewart Smith?

Writer Bio. Stewart Smith is a technical professional with more than a decade of mainframe programming and an additional decade of technical writing, as well as writing and publishing articles on a variety of technical topics.

How tall should a golf club be?

The table below tells you how much you should add or subtract to this length. Height Range, Golf club length to use. 6ft 9″ – 7ft 0″, Add 2″ to Standard Length.

What is a putter in golf?

The putter is the club in your pack that enables you to get the ball in the hole. The goal in any successful game is to get the ball in the hole with as few strokes as possible. For a golf putter to work for you, it has to be the right length for your height.

Do pro golfers use hybrid clubs?

Contrary to many people’s opinions, pro golfers use hybrids a lot. Hybrid clubs have longer iron shafts than standard-sized golf clubs. Hybrid clubs could be where the solution to most if not all of your problems at the golf course lies. For example, they can help you hit higher. Listen to your gut instinct.