Golf-FAQ.com

how to get rid of governor on golf cart

by Fabian Paucek Jr. Published 2 years ago Updated 2 years ago
image

How To Take The Governor Off A Yamaha Golf Cart?

  • Detach the cable from the carburetor. The cable is about the width of a straw.
  • Follow the disconnected cable up to the governor.
  • Disconnect the gas pedal cable from the governor and reroute it to the carburetor.
  • Using your wrench, remove the bolt on the gas pedal shaft.

General Instructions
  1. Detach the cable from the carburetor. The cable is about the width of a straw. ...
  2. Follow the disconnected cable up to the governor. ...
  3. Disconnect the gas pedal cable from the governor and reroute it to the carburetor. ...
  4. Using your wrench, remove the bolt on the gas pedal shaft.

Full Answer

How do you remove the governor on a golf cart?

 · How To Take The Governor Off A Yamaha Golf Cart? Detach the cable from the carburetor. The cable is about the width of a straw. Follow the disconnected cable up to the governor. Disconnect the gas pedal cable from the governor and reroute it to the carburetor. Using your wrench, remove the bolt on ...

Is there a governor on an electric golf cart?

 · Follow the cable that has been disconnected all the way up to the governor. Make a connection between the gas pedal cable and the governor, and then route it to the carburetor. Remove the bolt that holds the gas pedal shaft in place using your wrench. Does a Yamaha Golf Cart have a governor? Removing the carburetor cable is a simple process.

How do you bypass the governor on an EZGO golf cart?

How fast can a golf cart go without a governor?

image

How do you turn off the governor on a golf cart?

0:000:46How to remove governor on a Club Car golf cart - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou open up this box lap. Here. It looks up look inside. There's 12 cable down right here this leverMoreYou open up this box lap. Here. It looks up look inside. There's 12 cable down right here this lever you want to lift up and Bend and that pulls on the cable a little more.

How fast can a golf cart go without a governor?

A typical electric cart without an upgraded speed control tops out around 12 mph.

How can I make my golf cart faster?

6 Ways You Can Make a Golf Cart FasterAdd More Torque to Your Golf Cart.Upgrade Your Golf Cart's Motor.Improve the High-Speed Controller of the Cart.Add Better Golf Cart Tires.Use a Higher Powered Golf Cart Battery.Watch the Weight in Your Golf Cart.

How do you adjust the governor on a EZ Go electric golf cart?

0:237:10Simple Adjusting of an EZ Go Golf Cart Governor - YouTubeYouTubeStart of suggested clipEnd of suggested clipEngine. One Titan the governor spring located in the engine of most golf carts to adjust your cartsMoreEngine. One Titan the governor spring located in the engine of most golf carts to adjust your carts top speed.

Is 30 mph fast for a golf cart?

Depending on how far you want to go on a full charge, you might want a 40mph or a 30mph golf cart. At top speed, most golf carts do around 14mph. However, with the advent of street legal golf carts and modifications, it is possible to go 35mph and above.

How fast can a 48v golf cart go?

The standard 48v golf cart will travel between 12 to 14 mph. However, if you apply modifications to the vehicle you can expect top speeds of 20 to 24mph.

Why is my gas golf cart running slow?

Low Battery Usually, the most common reason golf carts slow down is when they don't get enough power output from the battery. If the battery pack charge is very low and your cart is out of power, your cart will run slow.

How can I make my EZ Go faster?

One way to increase the speed of EZ Go golf carts is to incorporate an octane booster when you fill the tank. The cart will have more pick-up, and it could gain as much as 5 mph. A different approach is to take out the throttle linkage governor on the carburetor.

Where is the governor on a Club Car golf cart?

0:061:28Where Is a Golf Cart Governor Located? - YouTubeYouTubeStart of suggested clipEnd of suggested clipWell a golf cart's governor located is actually down in the motor. Compartment. Some of them theseMoreWell a golf cart's governor located is actually down in the motor. Compartment. Some of them these electric ones nowadays. Actually the governor isn't a true governor. It is a control speed.

How can I make my gas golf cart go faster?

Increase the RPM For a gas golf cart, other than adjusting the governor, the speed may be enhanced by replacing the engine with a higher rpm output model. For an electric golf cart, several options are available to reach a higher rpm.

How fast does an EZ Go electric golf cart go?

Electric Motors Looking at the specifications for EZ Go electric golf carts, you notice a cart with a 36-volt motor is capable of 12 to 14 mph top speed. In addition, you notice a cart that's powered by a 48-volt motor can reach speeds just below 20 mph.

How Does a Golf Cart Governor Work

Governors play an important role in electric golf carts by limiting the speed they can travel. This is an important safety feature, as it prevents the cart from going too fast and helps ensure passengers’ safety.

How to Take the Governor off a Golf Cart

Removing the governor from a golf cart is a simple process that can be done with common tools. Here’s what you’ll need:

Frequently Asked Questions about Golf Cart Speed Governors

If you’re looking for ways to speed up your golf cart, there are a few things you can do. Start by removing the governor on top of the engine if you haven’t already. If it doesn’t have a governor, then you’ll need to open up the cart and look at the gear shaft to see if it’s turning.

How to remove governor from golf cart?

How to Remove the Governor From a Golf Cart. You hit the links. The course is open in front of you as far as the eye can see. The only thing holding you back is the put-put-puttering of your golf cart. Golf carts are governed to go anywhere from 12 to 14 miles per hour. But if you've got a few minutes, some simple mechanical know-how and a wrench, ...

How to remove carburetor cable?

The cable is about the width of a straw. It should come off with a pull, but keep a phillips head and regular screwdriver on hand , just in case.

How to adjust a gas pedal on a cart?

Using your wrench, remove the bolt on the gas pedal shaft. Slide the shaft up so there is more play in the gas pedal. Tighten the bolt and then start the cart. You may need to adjust the gas pedal shaft a couple of times before you have it to your liking.

How fast can a golf cart go?

Golf carts are governed to go anywhere from 12 to 14 miles per hour. But if you've got a few minutes, some simple mechanical know-how and a wrench, you can double the speed of your cart and zip through your round.

Can you tamper with a golf cart?

We do not condone tampering with a golf cart that belongs to a golf course. However, if you own your own gas golf cart or a friend allows you to remove the governor from their cart, have at it.

What is a governor and how does it work ?

A governor is a device that automatically restricts the flow or speed of a machine. In case you consider applying this modification to your golf cart, note that it will make the engine run faster and with greater thrust which, in turn, will result in higher speeds.

How to remove the governor from a golf cart

The first step is to remove all air from the tires of your golf cart. This is done so that you can place it on a jack without the possibility for it tipping over and falling off. Refer to your owner’s manual if you’re not sure how to do this since each model uses different methods.

Why would you want to do this ?

There are two reasons why some golf cart owners decide to remove the governor from their vehicles.

Safety tips when removing the governor from your golf cart

Removing the governor from your golf cart is a job which requires that you respect certain safety precautions.

Final Thought

Now that you know more about how to remove your governor from a golf cart, go out and do it. However keep in mind that doing so will permanently disable the governor on your golf cart . This means you will lose control over the speed of your engine no matter what you do .

How to get to the engine on a golf cart?

Open up your golf cart’s access panel to get to the engine. In many cases, the panel pops open like a car hood, but in some instances you’ll need to unscrew the panel first.

How to loosen tension on a governor?

Use a screwdriver— or in some cases a wrench—to loosen the tension on the governor’s springs. You have now adjusted the governor for faster speed.

Who is the writer of GolfCarCatalog.com?

GolfCarCatalog.com – “Adjusting Your Golf Cart’s Governor”. Writer Bio. Richard Kalinowski began writing professionally in 2006. He also works as a website programmer and graphic designer for several clients.

Where to find metal rod on golf cart?

Look for a small metal rod near your golf cart’s clutch.

Can golf carts be adjusted manually?

By Richard Kalinowski. Governors limit the speed of golf carts but can be adjusted manually. In theory, golf carts make it easier for players to get across the course, saving their much-needed energy for the game. In practice, golf carts can be more of a nuisance than a help, as many standard carts creep along at unbearably slow speeds.

Can a golf cart be a nuisance?

In practice, golf carts can be more of a nuisance than a help, as many standard carts creep along at unbearably slow speeds. Luckily, you don’t have to stick with these standard speeds. Golf cart speed is often controlled by a device called a governor, and you can adjust the governor on a golf cart relatively easily to make the cart faster.

What is the maintenance on a golf cart?

This includes battery and wiring inspections, refilling battery water, washing the cart, and anything else mentioned in your specific manufacturer owner’s guide.

How fast can a golf cart go without a speed control?

A typical electric cart without an upgraded speed control tops out around 12 mph. If you go this route, anticipate an upgrade cost around $700.

How much does it cost to replace a cart motor?

This is probably the most extreme measure you can take to remedy your speed issue, and you can expect this to cost around $1,000 with labor.

How to make a cart faster?

Step 1. The first option to making your cart faster is to replace the electronic speed control. This will enable more voltage to pass to the motor, producing the desired result. Unfortunately, this upgrade is not inexpensive as the unit can run anywhere from $100 to $1,000. Step 2.

Can you own a golf cart?

Owning your own personal golf cart certainly has its advantages, especially if you live in a cart-friendly community or belong to a private country club. As time goes on, the number of electric golf carts replacing gas carts continues to grow. One thing that electric cart owners find themselves wondering, however, is how do you make an electric golf cart faster?

Can you drive a golf cart faster?

It should be noted that the golf cart you are trying to make faster may not be designed to do so. Weigh the options carefully and exercise caution whenever driving a golf cart at any speed. Remember that golf carts are not equipped with seat belts, air bags and other safety equipment that you find in automobiles.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9