Golf-FAQ.com

how to inceease the governor on electric golf cart

by Jayson Hickle Published 3 years ago Updated 2 years ago
image

Method 2

  • Loosen the nut attached to the governor arm with a 7/16” wrench to turn the shaft.
  • Push the governor arm to the back of the cart and grasp it with your hand.
  • Turn the governor shaft in the counter-clockwise direction until it cannot be turned further.
  • Retighten the nut and let go off your hold on the governor arm.
  • This method also helps to slow down the cart.

Basically, an electric speed governor can be controlled by a tiny metal rod that's located by the clutch of your golf cart. First things first: The electric speed governor is connected to a cable. You can adjust your speed by rotating the nut in a counterclockwise rotation.Aug 29, 2019

Full Answer

How do you adjust the governor on a golf cart?

Simply adjust the cable coming from this metal protrusion, turning the nut counterclockwise to make the cable longer, effectively adjusting the cart’s governance to increase the overall speed. If you cannot find external controls, you’ll need to adjust the governor internally.

Can you adjust the governor on an EZ GO spark plug?

Many manufacturers, including EZ Go, do not want consumers tampering with their engines, and have thus hidden the governors in the spark plug ignition. This is very difficult to adjust without ruining the engine, and should be left to trained professionals. How can I stop the choke cable from getting hot on my EZ-GO golf cart?

How fast does a golf cart go with the governor on?

This article has been viewed 507,181 times. Learn more... Adjusting the governor can make your golf cart go 5–10 mph (8.0–16.1 km/h) faster. If you do this to an E-Z-GO golf cart, you might be able to go from 15 mph (24 km/h) to 22 mph (35 km/h).

How to bypass the governor on a Yamaha golf cart?

This is an easy way to bypass the golf cart governor and is supported by new model Yamaha golf carts that have a different setup from the G1 cart. This process involves removing the threaded rod and 10mm nut from the governor. Disconnect the throttle cable that is present in front of the governor arm.

image

How can I make my golf cart governor faster?

3:415:06How to Adjust an E Z Go Golf Cart Governor - WikiVideo - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can adjust the clutch to send more gas to your engine moving you faster. Find the small metalMoreYou can adjust the clutch to send more gas to your engine moving you faster. Find the small metal rod right next the clutch in the attached cable.

How do you remove a speed restrictor from a golf cart?

0:040:46How to remove governor on a Club Car golf cart - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the farther you bend that normally the faster it goes and then that's it basically when you wantMoreSo the farther you bend that normally the faster it goes and then that's it basically when you want to return your heart you just bend that back down and go back to normal speed.

Is there a governor on a electric Club Car golf cart?

Considering electric golf carts don't have governors like gas powered carts, the old-school method of simply removing the governor is not an option.

What controls the speed on an electric golf cart?

The controller meters out current and voltage on your battery based on user input, whether that be a gas pedal, a throttle, or even pedals on a bicycle. With the controller you are able to control your acceleration and deceleration, as well as the speed at which your vehicle moves.

How do you turn off the governor on a electric golf cart?

0:061:28Golf Tips & Etiquette : Where Is a Golf Cart Governor Located? - YouTubeYouTubeStart of suggested clipEnd of suggested clipWell a golf cart's governor located is actually down in the motor. Compartment.MoreWell a golf cart's governor located is actually down in the motor. Compartment.

How do I turn up the governor on my club car?

0:061:31Club Car Precedent Speed Increase SUPER EASY!!! - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you turn it that way to the right or what appears to be counterclockwise. It slows it down. AndMoreIf you turn it that way to the right or what appears to be counterclockwise. It slows it down. And if you turn it that way or clockwise it speeds things up. Very.

How fast can a 48v golf cart go?

The standard 48v golf cart will travel between 12 to 14 mph. However, if you apply modifications to the vehicle you can expect top speeds of 20 to 24mph.

Why is my electric golf cart so slow?

Low Battery Usually, the most common reason golf carts slow down is when they don't get enough power output from the battery. If the battery pack charge is very low and your cart is out of power, your cart will run slow.

How do you change the speed on a EZGO electric golf cart?

Tighten the governor spring located in the engine of most golf carts to adjust your cart's top speed. 90% of EZ Go Carts have simple springs which limit the speed of the engine. To raise the top speed of your golf cart, all you need to do is locate this spring and tighten it slightly.

Is a 48V golf cart faster than a 36V?

Basically, a 48V system gives you more “pep in your step” and picks up/speeds up a bit faster than a 36V system. Energy Needed/Amps Drawn- A 48V system draws less amps and provides a little more range with all things being equal (cart/passenger payload weight, motor horsepower, etc).

How do I increase the torque on my electric golf cart?

Change the Speed ControllerThe Speed Controller regulates the electric output of the motor; a higher voltage equals more RPM, and the faster your cart will travel. When you change the speed controller, you can reduce the voltage and increase the amperage of the motor, resulting in increased torque.

How to make a golf cart go faster?

Loosen the small nut and tighten the larger nut. The more you tighten the larger nut, the faster your cart will go. Start slowly, only tightening the nut a quarter turn to start. You can over-stress the engine if you try to run it too quickly, and it will skip and potentially burn out if you are too eager.

How to adjust EZ Go cart governor?

To adjust an EZ Go Cart Governor engine, start by removing the seat so that you can access the engine. Once the seat is off, remove the screws from the black plastic cover at the rear of the seat and then set the cover aside.

How to get a cart to move faster?

1. Remove the seat and plastic covering over the engine. Sometimes you'll need to remove screws while some models have seats that pop right out. Expose the engine so that you can get to work adjusting the motor. If you don't have a central governor spring, you can still get your cart to move a little faster.

How to tell if a gas pedal is a governor?

Follow the thickest cable coming from the gas pedal until your find a small spring wrapped around a metal rod. This is the governor. The spring apparatus will have two nuts, one small nut and one larger nut, holding it onto the rod.

How fast can a golf cart go?

Adjusting the governor can make your golf cart go 5–10 mph (8 .0–16.1 km/h) faster. If you do this to an E-Z-GO golf cart, you might be able to go from 15 mph (24 km/h) to 22 mph (35 km/h). It will only take about 5 minutes to do it. Steps.

How to change the speed of a car?

Locate your clutch pedal and line. The clutch is the pedal (sometimes a handle near your knee) that you use to put the car into reverse or change speeds. You can adjust the clutch to send more gas to your engine, moving you faster. ...

How to remove the black plastic cover on a golf cart?

Remove the screws from the black plastic cover at the rear of the seat. There should be five screws in most models. The engine is in the front of golf carts , underneath this panel. Take off the plastic cover and set it aside with the seats.

Why are golf carts so popular?

In theory, golf carts make it easier for players to get across the course, saving their much-needed energy for the game. In practice, golf carts can be more of a nuisance than a help, as many standard carts creep along at unbearably slow speeds. Luckily, you don’t have to stick with these standard speeds. Golf cart speed is often controlled by a device called a governor, and you can adjust the governor on a golf cart relatively easily to make the cart faster.

How to adjust governor on a golf cart?

If you find this rod, then your governor can be easily adjusted by accessing the cart’s inner workings. Simply adjust the cable coming from this metal protrusion, turning the nut counterclockwise to make the cable longer, effectively adjusting the cart’s governance to increase the overall speed. If you cannot find external controls, you’ll need to adjust the governor internally.

How to get to the engine on a golf cart?

Open up your golf cart’s access panel to get to the engine. In many cases, the panel pops open like a car hood, but in some instances you’ll need to unscrew the panel first.

How to loosen tension on a governor?

Use a screwdriver— or in some cases a wrench—to loosen the tension on the governor’s springs. You have now adjusted the governor for faster speed.

Can you adjust the speed of a golf cart?

Luckily, you don’t have to stick with these standard speeds. Golf cart speed is often controlled by a device called a governor, and you can adjust the governor on a golf cart relatively easily to make the cart faster.

Who is the writer of GolfCarCatalog.com?

GolfCarCatalog.com – “Adjusting Your Golf Cart’s Governor”. Writer Bio. Richard Kalinowski began writing professionally in 2006. He also works as a website programmer and graphic designer for several clients.

How fast can a golf cart go without a speed control?

A typical electric cart without an upgraded speed control tops out around 12 mph. If you go this route, anticipate an upgrade cost around $700.

What is the maintenance on a golf cart?

This includes battery and wiring inspections, refilling battery water, washing the cart, and anything else mentioned in your specific manufacturer owner’s guide.

How to make a cart faster?

Step 1. The first option to making your cart faster is to replace the electronic speed control. This will enable more voltage to pass to the motor, producing the desired result. Unfortunately, this upgrade is not inexpensive as the unit can run anywhere from $100 to $1,000. Step 2.

How much does it cost to replace a cart motor?

This is probably the most extreme measure you can take to remedy your speed issue, and you can expect this to cost around $1,000 with labor.

Can you own a golf cart?

Owning your own personal golf cart certainly has its advantages, especially if you live in a cart-friendly community or belong to a private country club. As time goes on, the number of electric golf carts replacing gas carts continues to grow. One thing that electric cart owners find themselves wondering, however, is how do you make an electric golf cart faster?

Can you drive a golf cart faster?

It should be noted that the golf cart you are trying to make faster may not be designed to do so. Weigh the options carefully and exercise caution whenever driving a golf cart at any speed. Remember that golf carts are not equipped with seat belts, air bags and other safety equipment that you find in automobiles.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9