How do you install a lift kit on a golf cart?
While many golfers accessorize their golf carts with upgraded seats, glass and lighting, you may desire to install a four-inch lift kit on your cart in order to drive the cart over rougher terrain. Many lift kits can be installed without having to weld or cut on your golf cart's body. Park your golf cart in a covered area to install the lift kit.
How do you jack up a golf cart?
Lift the rear of the cart with the two-ton car jack and place a cinder block under the frame by each of the rear wheels. Remove the car jack and repeat for the front two wheels of the cart. The golf cart should now be sitting on four cinder blocks off the ground. Step 2. Take the wheels off of your golf cart.
How do you remove suspension from a golf cart?
Take the wheels off of your golf cart. Pick a corner of the cart to begin removing the suspension one corner at a time. Keep the bolts and cotter pins that correspond with each corner of the cart together. This will help prevent any issues with reassembly of the golf cart components.
How do you install a lift kit on a golf cart?
6:5219:35And nuts with the lift kit to mount the lower shocks expel the rack back to the golf cart. Use allMoreAnd nuts with the lift kit to mount the lower shocks expel the rack back to the golf cart. Use all the bolts that you use for the disassembly. Process to mount everything back.
How do you install a 4 inch lift kit on a Yamaha golf cart?
0:5312:27As always we want to make sure we take a few safety precautions before we get started with ourMoreAs always we want to make sure we take a few safety precautions before we get started with our installation. First. We want to turn our card. Off. Then we want to set our parking brake.
How do you put a lift kit on a EZ Go golf cart?
5:489:28Before doing so make sure you fully support the axle to remove the nuts on the u-bolt use a 9/16MoreBefore doing so make sure you fully support the axle to remove the nuts on the u-bolt use a 9/16 inch socket. With our u-bolts removed we can now remove the lower shock absorber hard.
What size lift should I put on my golf cart?
A 6” golf cart lift is the most popular lift kit on the market as it gives you the highest clearance over rough/rugged terrain AND can typically accept a 23” all terrain tire (basically, the meatiest, tallest tire you can get). 3” golf cart lift kits usually are not big enough to add the big rough tires.
How do you jack up a Yamaha golf cart?
0:321:54Once you have the jack stand properly positioned underneath its a frame layout you're gonna go aheadMoreOnce you have the jack stand properly positioned underneath its a frame layout you're gonna go ahead and lower it slowly out of the jack stand making sure nothing shifts are at this process.
How do you install a lift kit on a Yamaha g2?
1:5811:39From the car the next step is to install the driver side arm to the stock a arm location using theMoreFrom the car the next step is to install the driver side arm to the stock a arm location using the stock bolts nuts and cotter pins securely tighten to the front mount and rear mount of the car.
How much does it cost to put a lift kit on a golf cart?
A lift kit for a golf cart is usually priced around $250. If you install the kit yourself, then your expenses will end there. If you need to hire someone to lift your cart, on average, this will cost you about $75.00 per hour. Lifting a golf cart is a job that will take a few hours.
How do you put bigger tires on a golf cart?
4:029:40So this modification here you can save some money add some bigger tires and look good as well nowMoreSo this modification here you can save some money add some bigger tires and look good as well now for the lower cradle i took some two by two square tubing i drew them together with some flat stock.
What is a drop axle lift kit?
Drop Axle Lift Kits: A drop axle lift kit is designed with a longer than stock radius that tapers down to the stock spindles on your golf cart. This lengthens your axle height and allows you to replace your front axle while keeping your stock spindles.
Do lifted golf carts go faster?
Additional Options for More Speed Some golf cart owners with a true need for speed will opt to use a lift kit or block lift so that they may install even larger tires. This may add a bit of expense, but a lot of extra speed.
Is it bad to lift a golf cart?
Wear and Tear Issues They build golf carts for standard tires and wheels. Unfortunately, this means that adding lifted tires will inevitably require your cart to work harder. Having to work harder increases pressures on the golf cart motor, which may cause it to wear out quicker.
Do lifted golf carts ride rough?
Your Yamaha golf cart rides rough because of a small lift and a leaf spring type suspension. Both of these components can give you a harsh ride. Consider replacing the existing lift with a long travel lift.
How to install a lift kit on a golf cart?
Step 1. Park your golf cart in a covered area to install the lift kit. Lift the rear of the cart with the two-ton car jack and place a cinder block under the frame by each of the rear wheels. Remove the car jack and repeat for the front two wheels of the cart. The golf cart should now be sitting on four cinder blocks off the ground.
How to remove golf cart suspension?
Take the wheels off of your golf cart. Pick a corner of the cart to begin removing the suspension one corner at a time. Keep the bolts and cotter pins that correspond with each corner of the cart together. This will help prevent any issues with reassembly of the golf cart components. To remove the corner of the suspension, ...
How to remove cinder blocks from golf cart?
Support the front of the golf cart with the car jack and remove the cinder blocks. Repeat the process for the rear of the golf cart.
How to connect golf cart suspension to frame?
Connect the suspension to the frame one wheel-base at a time. You will bolt the center piece of the suspension to the golf cart body and then reinsert the cotter pin. Then, reconnect the suspension bolts to the lift assembly and insert the second cotter pin. Repeat this process for each corner of the golf cart. Reinstall your golf cart wheels.
Where to install drive axle on golf cart?
Install the drive axle, frame stiffener and suspension connector at each corner of the golf cart. These connections will all be bolt-on connections with no cutting or drilling on your golf cart required.
Do golf carts have lifts?
Golf carts are normally sold with a standard lift on the wheel base. While many golfers accessorize their golf carts with upgraded seats, glass and lighting, you may desire to install a four-inch lift kit on your cart in order to drive the cart over rougher terrain.
How to jack up a golf cart?
Place the golf cart in the tow mode and pop the wheel caps off and use a floor jack to jack the cart up. Place jack stands underneath the frame rails behind both of the front wheels and tires and release pressure from the floor jack onto the jack stands.
How fast did the 2014 Club Car Precedent go?
We reinstalled it and went from 12 mph to 23 mph.
What is the best lift for a golf cart?
4″ Lifts. If you are looking for 4 inches specifically, then a block lift is going to be your best option. These are the easiest to install, tend to be affordable, and still allow you to add taller, beefier tires to your custom golf cart.
How big of a lift for a wheel?
They also accommodate most tire and wheel sizes (up to 23 inches), so if you have large tires, chances are, a 6 inch lift will work just fine. This also allows for some extra room in the wheel well, that way if you have passengers, you won’t experience any rubbing.
What golf carts have 20" tires?
Yamaha is another golf cart brand that has very little space for upgraded tires on stock models. The only exception would be their G29 (DRIVE), which can handle 20″ tires without installing a lift kit.
What is a drop spindle lift?
Drop Spindle Lift Kits are probably the most popular options when increasing the ground clearance for your golf cart. These kits are very easy to install, they utilize the already existing suspension, and they aren’t expensive. Drop Spindle kits are used to replace and increase the golf cart spindle size and length.
What is an A arm lift?
A-Arm lift kits tend to be a beefier version of Drop Spindle kits (we talk about these next). These kits will pretty much replace the entire front suspension of your golf cart. This helps the cart ride smoother, giving you a more comfortable experience when driving.
How does a drop axle lift work?
The way a drop axle lift works, is they add a longer stock radius, which then tapers down to the spindles already attached to the golf cart. This can increase the axle height, and allows you to replace the whole front axel without having to mess with your spindles.
What size tires are available for a custom cart?
These tend to be very popular for those looking to add those cool 20″ tires to their custom cart. Not only that, but you can find 3 inch kits in all the styles we mention above including Spindle, A-Arm, and Drop Axle.