Nearly all Club Car lift kits can be installed with a few basic tools and a bit of elbow grease. You will need to jack up the cart and use jack stands to lift it off the ground, this will enable you to work under the cart to replace the suspension components. You will also need wrenches and screwdrivers of the correct size.
Do I need a lift kit for my golf cart?
If you are up for the idea of lifting the club car, then a lift kit is a convenient and desirable prospect. The following are some of the significant types of lift kits for your golf cart. If you are in the market for a stock spindle with a greater radius, then Drop Axle Lift Kits is your man for the job.
How to choose the best club car lift kits?
The custom kits are usually trial-and-error units. The best club car lift kit mostly depends on your needs, and of course, the size of your pocket. For example, the block lift will make you taller than everyone else. On the other hand, a spindle kit is perfect with custom wheels. An A-arm is for the vehicles that tackle new terrains.
Where do the support plates go on a club car?
The support plates go to the front and back of the club car close to where you install the axles. Usually, the objective is to provide extra support strength for the lift kit. This is why you are the new set of A-arms and position them adequately. You will also need to add springs and shocks to the arms for extra support.
How do you lift a car with a lift kit?
Lift the rear end to accommodate larger tires and the lift kit. Then lower the vehicle onto the jack stands, which are on the outermost frame sections – make sure of this. Make sure that the floor jack supports the center section without lifting it and then move on to uninstall the rear wheels.
Are golf cart lift kits easy to install?
Spindle lift kids are relatively easy to install. With this kit, you will have a wider stance. You will be able to put bigger wheels on your cart to create a custom look without the high expense. Wider and bigger wheels mean your golf cart can move along at a higher rate of speed, which is a nice plus.
How can I make my club gas DS golf cart go faster?
0:061:31Club Car Precedent Speed Increase SUPER EASY!!! - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you turn it that way to the right or what appears to be counterclockwise. It slows it down. AndMoreIf you turn it that way to the right or what appears to be counterclockwise. It slows it down. And if you turn it that way or clockwise it speeds things up. Very.
What does DS mean on a golf cart?
The DS in Club Car DS is abbreviated from the name Dom Saporito. He served as a vehicle designer for the Club Car golf carts during the 1980s.
How much does it cost to lift a Club Car golf cart?
A lift kit for a golf cart is usually priced around $250. If you install the kit yourself, then your expenses will end there. If you need to hire someone to lift your cart, on average, this will cost you about $75.00 per hour. Lifting a golf cart is a job that will take a few hours.
What is a Club Car DS model?
Club Car DS Club Car made body changes in 1981 and introduced the “DS” model, and this model quickly became the flagship cart of the golf cart industry. The Club Car DS front and rear body panels were constructed of plastic and fiberglass.
How do you remove the governor from a Club Car DS?
0:000:46How to remove governor on a Club Car golf cart - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou open up this box lap. Here. It looks up look inside. There's 12 cable down right here this leverMoreYou open up this box lap. Here. It looks up look inside. There's 12 cable down right here this lever you want to lift up and Bend and that pulls on the cable a little more.
What years are Club Car DS?
Club Car DS golf carts made in the years 1982 – 2000.5 will look like the golf cart pictured above. Club Car DS made in the years 2000.5 – present will look like the golf cart pictured above. Club Car Precedents were introduced in 2004 and are the newest design in the Club Car family.
What was the last year for Club Car DS?
The Club Car DS was released back in 1984 and discontinued production in 2011. It was designed to be a Fleet Golf Cart for Golf Courses.
How do you tell if my Club Car is a DS?
Step 2: Look at the serial number to determine the model and year of your Club Car golf cart:A = DS Electric.AA = DS Electric (48-volt)AB = DS Electric (36-volt)AC = DS Electric (48-volt)AD = Pioneer 1200 Gas Utility.AE = Pioneer 900 Gas Utility.AF = Cafe Express Utility.AG = DS Gas.More items...•
Is it bad to lift a golf cart?
If your cart is primarily used on a course or the street, you should either not lift it or go with an adjustable long travel kit. Golf courses do not allow aggressive tread or all terrain tires due to the damage they cause to turf.
Do lifted golf carts go faster?
Additional Options for More Speed Some golf cart owners with a true need for speed will opt to use a lift kit or block lift so that they may install even larger tires. This may add a bit of expense, but a lot of extra speed.
How do you install a lift kit on a golf cart?
6:5219:35How to install Golf Cart Lift Kit | Allsports 6" Lift Kit & Trex WheelsYouTubeStart of suggested clipEnd of suggested clipAnd nuts with the lift kit to mount the lower shocks expel the rack back to the golf cart. Use allMoreAnd nuts with the lift kit to mount the lower shocks expel the rack back to the golf cart. Use all the bolts that you use for the disassembly. Process to mount everything back.
How to jack up a golf cart?
Place the golf cart in the tow mode and pop the wheel caps off and use a floor jack to jack the cart up. Place jack stands underneath the frame rails behind both of the front wheels and tires and release pressure from the floor jack onto the jack stands.
How fast did the 2014 Club Car Precedent go?
We reinstalled it and went from 12 mph to 23 mph.
What do you need to lift a Yamaha golf cart?
Some of the tools and equipment that you require include a floor jack, wheel chocks, jack stands, small pry tool, and needle-nose pliers.
Where do you put support plates on a club car?
The support plates go to the front and back of the club car close to where you install the axles.
What parts do you need for a golf cart?
Some of the crucial parts you are going to need to include longer shocks, springs, axles, and A-arms. A support plate may also be necessary, at least for most golf carts. The support plate goes directly to the golf cart and attaches your custom lift kit to the wheels.
What is a block lift kit?
Block Lift Kits enhance the appearance and height of your golf cart. The system is usually a spacer between the frame and suspension, with the flexibility and functionality to boot.
What to do if you have trouble with your cart axles?
If you’re having trouble with the axles, let a professional do it for you. There is no harm in asking for help, and it goes a long way into ensuring your safety and durability of your cart. You can move on to the A-arms if you’re comfortable with this step.
What was the golf cart meant for?
In the not so far away past, golf carts were meant for the greens. You get the idea; flat surfaces with extremely short grass. However, the golf carts have moved past the golf courses into residential communities, beaches, backcountry areas, retirement communities, educational institutions, and hospitals, among others.
Can you buy a lift kit for a golf cart?
A simple mistake will take you back several hundred or even thousand dollars. If that happens , well, then it would have been better to purchase a lift kit for your golf cart. But on the bright side, a homemade lift kit for a golf cart is the most rewarding.
