Instructions
- Park your golf cart in a covered area to install the lift kit. Lift the rear of the cart with the two-ton car jack and...
- Take the wheels off of your golf cart. Pick a corner of the cart to begin removing the suspension one corner at a time.
- Install the drive axle, frame stiffener and suspension connector at each corner of the golf cart. These connections...
What is the best lift kit for a golf cart?
The kit is one of the most economical, not to mention they are super easy to install. Block Lift Kits enhance the appearance and height of your golf cart. The system is usually a spacer between the frame and suspension, with the flexibility and functionality to boot. The lift kits are also simpler to install and inexpensive.
What is a block lift kit?
Block Lift Kits enhance the appearance and height of your golf cart. The system is usually a spacer between the frame and suspension, with the flexibility and functionality to boot. The lift kits are also simpler to install and inexpensive. Without a doubt, Block Lift Kits will give you a lifted and the coolest look in the block.
How do you jack up a golf cart?
Lift the rear of the cart with the two-ton car jack and place a cinder block under the frame by each of the rear wheels. Remove the car jack and repeat for the front two wheels of the cart. The golf cart should now be sitting on four cinder blocks off the ground. Step 2. Take the wheels off of your golf cart.
How to install suspension on a golf cart?
Connect the suspension to the frame one wheel-base at a time. You will bolt the center piece of the suspension to the golf cart body and then reinsert the cotter pin. Then, reconnect the suspension bolts to the lift assembly and insert the second cotter pin. Repeat this process for each corner of the golf cart. Reinstall your golf cart wheels.
How do you install a block lift kit on a EZ Go golf cart?
5:489:28How to Install an EZGO Lift Kit Installation - Lifting a Golf CarYouTubeStart of suggested clipEnd of suggested clipBefore doing so make sure you fully support the axle to remove the nuts on the u-bolt use a 9/16MoreBefore doing so make sure you fully support the axle to remove the nuts on the u-bolt use a 9/16 inch socket. With our u-bolts removed we can now remove the lower shock absorber hard.
How do you put a lift kit on a Club Car golf cart?
4:3515:396" A-Arm Lift Kit for Club Car® DS® | How to Install Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is the driver's side you'll notice that the spring bracket is weld on the top and it should beMoreThis is the driver's side you'll notice that the spring bracket is weld on the top and it should be on the front side of the golf. Cart. Now we're going to use our supplied bolt. And attach our a arm.
What is a block lift kit for golf cart?
Block Lift Kits: Typically 4” in height, Block Lift Kits add block-shaped steel pieces under your stock suspension to give your cart a skyward boost! This style of lift kit is inexpensive and effective, but only come in 4 inch height and won't give you as much flexibility as Drop Spindle, Drop Axle or A-Arm lift kits.
How do you put a lift kit on a Yamaha golf cart?
10:1511:163" Spindle Lift Kit for Yamaha® Drive2 | How to Install Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you've achieved your 8 inch towing in the front you're now finished installing your Jake's 3-MoreOnce you've achieved your 8 inch towing in the front you're now finished installing your Jake's 3-inch spend a lift kit designed for the yamaha drive.
Is it easy to put a lift kit on a golf cart?
Install it directly onto the factory suspension. Spindle lift kids are relatively easy to install. With this kit, you will have a wider stance. You will be able to put bigger wheels on your cart to create a custom look without the high expense.
How much does it cost to install a lift kit on a golf cart?
A lift kit for a golf cart is usually priced around $250. If you install the kit yourself, then your expenses will end there. If you need to hire someone to lift your cart, on average, this will cost you about $75.00 per hour. Lifting a golf cart is a job that will take a few hours.
Does a lift kit make a golf cart ride smoother?
Sometimes a golf cart rides poorly because it needs to be lifted. If you are continually going over rough terrain, you may want to consider putting a lift kit on your cart. When you do this, you will be able to use larger tires better suited for this type of thing.
Do lifted golf carts ride rough?
Your Yamaha golf cart rides rough because of a small lift and a leaf spring type suspension. Both of these components can give you a harsh ride. Consider replacing the existing lift with a long travel lift. Similarly, it's a good idea to use a long travel A-arm in place of the leaf spring suspension.
How do you make a golf cart go faster?
6 Ways You Can Make a Golf Cart FasterAdd More Torque to Your Golf Cart.Upgrade Your Golf Cart's Motor.Improve the High-Speed Controller of the Cart.Add Better Golf Cart Tires.Use a Higher Powered Golf Cart Battery.Watch the Weight in Your Golf Cart.
How do you install a 4 lift kit on a golf cart?
5:489:28How to Install a Premium 4" Inch EZ-GO TXT Lift Kit | Part# 74786G02YouTubeStart of suggested clipEnd of suggested clipBefore doing so make sure you fully support the axle. To remove the nuts on the u-bolt use a 9/16MoreBefore doing so make sure you fully support the axle. To remove the nuts on the u-bolt use a 9/16 inch socket. With our u-bolts removed we can now remove the lower shock absorber hard. Way.
How do you put a lift kit on a Yamaha G29 golf cart?
6:0617:16Yamaha G29 Golf Cart 6 inch Spindle Lift Kit Install How To DIY mud tires ...YouTubeStart of suggested clipEnd of suggested clipAs you can see the top of it mounts to the shock mount. And the bottom of it is hanging out andMoreAs you can see the top of it mounts to the shock mount. And the bottom of it is hanging out and again it'll be angled. Towards the front of the golf. Cart.
How do you install a lift kit on a Yamaha G29?
0:0812:21Jakes Long Travel Lift Kit Yamaha G29/Drive Installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipToday we're going to how to put a Yamaha g29 long travel kit on a cart you need to jack the cart upMoreToday we're going to how to put a Yamaha g29 long travel kit on a cart you need to jack the cart up remove the wheels and tires remove.
How do you jack up a club car on DS?
0:321:54How To Lift Your Golf Cart Onto Jack Stands | RZ Carts - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you have the jack stand properly positioned underneath its a frame layout you're gonna go aheadMoreOnce you have the jack stand properly positioned underneath its a frame layout you're gonna go ahead and lower it slowly out of the jack stand making sure nothing shifts are at this process.
Do lifted golf carts ride rough?
Your Yamaha golf cart rides rough because of a small lift and a leaf spring type suspension. Both of these components can give you a harsh ride. Consider replacing the existing lift with a long travel lift. Similarly, it's a good idea to use a long travel A-arm in place of the leaf spring suspension.
How do you make a golf cart go faster?
6 Ways You Can Make a Golf Cart FasterAdd More Torque to Your Golf Cart.Upgrade Your Golf Cart's Motor.Improve the High-Speed Controller of the Cart.Add Better Golf Cart Tires.Use a Higher Powered Golf Cart Battery.Watch the Weight in Your Golf Cart.
Can I put bigger tires on my golf cart?
Lifted golf carts can fit ANY 8” tire, low profile OR high profile. In addition, lifted golf carts can fit any high profile tire measuring at 10”, 12” or 14”. Lifted carts will be able to take 20", 22", 23" and in some cases 24" all terrain tires.
How to jack up a golf cart?
Place the golf cart in the tow mode and pop the wheel caps off and use a floor jack to jack the cart up. Place jack stands underneath the frame rails behind both of the front wheels and tires and release pressure from the floor jack onto the jack stands.
How fast did the 2014 Club Car Precedent go?
We reinstalled it and went from 12 mph to 23 mph.
What is a block lift kit?
Block Lift Kits enhance the appearance and height of your golf cart. The system is usually a spacer between the frame and suspension, with the flexibility and functionality to boot.
What happens to the camber and castor of a golf cart after lifting it?
Inarguably, the camber and castor of the golf cart will change after the lifting process. Steering problems will happen if you fail to tweak and center the angles.
How to remove a cab jack?
Loosen the lug nuts and lift the front end sufficiently to accommodate larger tires and lift kit. Lower the cab onto the jack and roll the floor jack away.
What parts do you need for a golf cart?
Some of the crucial parts you are going to need to include longer shocks, springs, axles, and A-arms. A support plate may also be necessary, at least for most golf carts. The support plate goes directly to the golf cart and attaches your custom lift kit to the wheels.
What to do if you have trouble with your cart axles?
If you’re having trouble with the axles, let a professional do it for you. There is no harm in asking for help, and it goes a long way into ensuring your safety and durability of your cart. You can move on to the A-arms if you’re comfortable with this step.
What was the golf cart meant for?
In the not so far away past, golf carts were meant for the greens. You get the idea; flat surfaces with extremely short grass. However, the golf carts have moved past the golf courses into residential communities, beaches, backcountry areas, retirement communities, educational institutions, and hospitals, among others.
Why do people use golf carts?
The number of golf cart enthusiasts is growing by the day, mostly because of the love for the outdoors. But if you are planning on carrying an extra amount of weight, then you may need to consider larger tires. Lifting it will also give it some impressive ruggedness and workability.
What is a Golf Cart Lift Kit?
A golf cart lift kit will include several parts that go into your cart to give it a higher stance. Depending on the kit, it can increase your ground clearance by as little as 2-inch to as high as 8-inch.
How Long Does It Take To Install A Lift Kit on a Golf Cart?
Depending on the type of kit you choose, it will take a few hours to install a golf cart kit. The block and spindle drop lift kits are relatively easy to install, so they will take the least amount of time.
What Size Lift Should I Put On My Golf Cart?
You should decide the height based on how you intend to use your cart and how much you can spend on the kit. If you already have a preferred tire size, make sure that the cart has enough lift to fit it.
Can You Put Bigger Tires on a Golf Cart Without a Lift Kit?
You can fit bigger tires on carts without installing lift kits. But this will decrease the clearance between the tires and the body of the cart. When the cart drives over bumps, the tire will rub on the underside of the body.
Does Lifting a Golf Cart Make It Faster?
Lifting a car alone will not make it faster, rather the extra weight that is added when installing the kit might make the cart a bit slower. But if you also add bigger wheels, it should marginally increase the speed.
What is a Golf Cart Lift Kit?
Golf cart lift kits are engineered parts that you can install on your golf cart in order to raise the height an additional 3 – 8 inches (We’ve even seen them up to 12″). This is excellent for those looking to add ground clearance (for off-roading), or a wider, more stable stance to their golf cart. This is also essential for those looking to add bigger tires and rims to their cart, making for a smoother more enjoyable ride.
What is the best lift for a golf cart?
4″ Lifts. If you are looking for 4 inches specifically, then a block lift is going to be your best option. These are the easiest to install, tend to be affordable, and still allow you to add taller, beefier tires to your custom golf cart.
What is a drop spindle lift?
Drop Spindle Lift Kits are probably the most popular options when increasing the ground clearance for your golf cart. These kits are very easy to install, they utilize the already existing suspension, and they aren’t expensive. Drop Spindle kits are used to replace and increase the golf cart spindle size and length.
What is an A arm lift?
A-Arm lift kits tend to be a beefier version of Drop Spindle kits (we talk about these next). These kits will pretty much replace the entire front suspension of your golf cart. This helps the cart ride smoother, giving you a more comfortable experience when driving.
How does a drop axle lift work?
The way a drop axle lift works, is they add a longer stock radius, which then tapers down to the spindles already attached to the golf cart. This can increase the axle height, and allows you to replace the whole front axel without having to mess with your spindles.
What size tires are available for a custom cart?
These tend to be very popular for those looking to add those cool 20″ tires to their custom cart. Not only that, but you can find 3 inch kits in all the styles we mention above including Spindle, A-Arm, and Drop Axle.
Why do golf carts have wider stances?
This can give your golf cart a wider stance, and increase the stability. The wider stance is perfect for those looking to fit those big off-set wheels on your cart, which in turn, can allow you to add wider and taller tires.
