
How to Install Ferrules on Golf Clubs
- 1: If you are replacing a clubhead or a shaft, or building your own club, you will have to install a ferrule into the...
- 2: To remove the ferrule of your club, you need to first remove the shaft from the clubhead. The easiest way to do so is...
- 3: Once you have detached the shaft and the clubhead. Add some gentle heat to the ferrule...
How do you install a ferrule on a clubhead?
If you’re building your own club, or you’re replacing a shaft or a clubhead, you’ll have to install a ferrule before putting the head onto the shaft. Turn the club upside down and tap it onto the ground to push the ferrule farther onto the shaft.
What size ferrule do I need for my golf clubs?
Standard iron ferrules are from 1/8 to 1 1/4 inches long with an internal diameter of .368 inch, while standard wood ferrules measure from 1/8 to 3/4 inch long with an inside diameter of .334 inch. If you’re building your own club, or you’re replacing a shaft or a clubhead, you’ll have to install a ferrule before putting the head onto the shaft.
What is a black ferrule on a golf club?
The black ferrule, at the end of the shaft, is a standard golf club component. A ferrule is a mainly cosmetic addition to a golf club that fits over the club’s shaft, forming a cosmetic transition between the hosel and shaft.
What is a ferrule and why do I need one?
Ferrules are all about creating a secure connection between the clubhead and the shaft. The main advantage of having a ferrule is that your club will be able to take more stress throughout your swing.

How do you put new ferrules on a golf club?
1:292:48How To: Set Iron Ferrules - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you have a tip weight you want to put the tip weight in before to make sure that you don't overMoreIf you have a tip weight you want to put the tip weight in before to make sure that you don't over set the Pharaoh or else you're gonna have a gap. But this case there's no tip weight being used.
Do you need a ferrule on a golf club?
Does Every Club Need Them? Almost all modern clubs are designed to require a ferrule. Any club that has a clubhead with a neck that ends abruptly, almost all clubs have this, require a ferrule. Some older clubs have a tapered neck which means they fit the shaft in a really flush way.
How do you add a ferrule?
Turn the club upside down and tap it onto the ground to push the ferrule farther onto the shaft. Alternatively, press the shaft into a ferrule installing device, choose the correctly sized hole and then push the shaft all the way down into the device, which sets the ferrule into the proper position.
How much does it cost to replace a ferrule golf club?
Remove Rattle: easy fix -- $5.00 / hard fix -- $20.00. Replace Ferrule -- $12.50. Repair Ferrule -- $5.00.
How do I fix my ferrule on my golf club?
5:168:52LOOSE FERRULE / The EASIEST Golf Club Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow the recommended way the best way to do this is to get some golf epoxy or some two-part epoxyMoreNow the recommended way the best way to do this is to get some golf epoxy or some two-part epoxy really it doesn't have to be golf. Specific it can be any two-part epoxy.
What is the point of ferrule?
Ferrules greatly reduce the contact resistance between the wire and connector, and even help cut down on the oxidation in the strands because of the lack of air space between them.
How do you fit a ferrule fitting?
0:432:26How to Install a BrassCraft® Compression Fitting - YouTubeYouTubeStart of suggested clipEnd of suggested clipSlide the compression fitting onto the tube until the tube bottoms out a drop of lubricating oil orMoreSlide the compression fitting onto the tube until the tube bottoms out a drop of lubricating oil or thread sealant will ease not assembly thread the nut onto the fitting hand-tighten.
How do you install string ferrules?
1:332:37How To Install String Through Ferrules On A Guitar Body - YouTubeYouTubeStart of suggested clipEnd of suggested clipBody to use a tool place a ferrule into the hole in the back of the guitar. Insert. The tool andMoreBody to use a tool place a ferrule into the hole in the back of the guitar. Insert. The tool and then just tap it in with a hammer. It's really that.
How do you install cable ferrules?
1:342:57How to Crimp Ferrules (and Why You Need Them) - YouTubeYouTubeStart of suggested clipEnd of suggested clipMaking sure that all the wire strands are contained inside the tube place the ferrule into theMoreMaking sure that all the wire strands are contained inside the tube place the ferrule into the crimper. And squeeze it until it. Releases. From there get a small piece of heat shrink.
How do you remove a ferrule from a golf shaft?
0:223:50How to Remove Ferrule from Steel Shaft Golf Club - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd also your heat gun so plug bit of heat. Gently on the shaft. There's apply the heat. You'reMoreAnd also your heat gun so plug bit of heat. Gently on the shaft. There's apply the heat. You're gonna see the ferrule start to bubble. Become a bit more smooth-looking kind of like.
Can irons be Reshafted?
Can golf irons be reshafted? Yes, just like other types of golf clubs, golf irons can also be reshafted using a golf repair service.
Where can I get my clubs Reshafted?
When it comes time to reshaft your clubs, you might be inclined to do it yourself. But if you're unfamiliar with the process, you can visit the Golf Services PROS at your local DICK'S Sporting Goods to get help with the repair. Their Certified Fitters can match you with a new shaft that best complements your game.
Why do you need a ferrule on a golf club?
The main advantage of having a ferrule is that your club will be able to take more stress throughout your swing. You can trust that the club will not start to twist over time or anything if you have a ferrule in place. Obviously this is not fully guaranteed but it certainly helps add more sturdiness to the connection.
What to do if your ferrules split?
If one of your ferrules splits you should first try to figure out what may have caused it. If it was brittle then you may want to replace your whole set. It really isn’t a huge deal though, just remove the broken ferrule and have it replaced.
What does a ferule do?
What Exactly Does A Ferrule Do? Ferrules are seen on many objects from paint brushes to tow cables and even golf flags. They are additions to a structure that help fasten or secure two things together. So, in terms of the golf club, which is why we are here, it helps secure the head of the club to the shaft.
What is the best alternative to plastic for golf clubs?
It is important that the material used is strong and light, you don’t want to affect swing weighting of the club. Aluminium is a great alternative to plastic for this reason.
Where does the adjustability of a golf club come from?
The adjustability of these clubs comes from an adaptor between the top of the neck of the club and the shaft, this means the ferrule has to be on top that. It means that, in this case, the very bottom of the shaft actually becomes part of the clubhead, in effect.
Can you reuse ferrules?
If you manage to get used ferrules off without damaging or cutting them, then yes, you can reuse them. Depending on what was used to install them, it can be really easy or almost impossible to get them off undamaged. A bit of heat or steam can be all it takes to break down the epoxy and free them.
Can you replace a ferrule with a new one?
If you follow the steps above and remove the old ferrule, you can replace them with new ones . This is your chance to take the clubs up a notch with some ferrule bling. The most important thing in all of this is to make sure you get the correct size, measure the diameter of the shaft at the point the ferrule will sit.
Club Building 101: How to properly fit ferrules
When it comes to ferrules, there can be some custom option limitations. If you attempt to install the wrong size, it’s easy to have them break or be damaged beyond repair during the process. This video specifically addresses installing .355″ taper ferrules onto .370″ taper shafts while maintaining a snug fit and preventing creep.
WATCH: Talking TaylorMade Spider GT putters with Bill Price
BK talks with Bill Price, TaylorMade’s senior director of putters, about the new Spider GT putters.
Clement: How to stay with your golf shots and stop swaying
Nothing better than being able to stay with your golf shots and create some powerful leverage to apply some compression through your golf shots like smashing through a door with a battering ram! Get a GOLF SWING WITH LAG, POWER AND SPEED!
Clement: Beat the shanks for good
Editor’s note: Shawn is shouting in his caption, so you know it’s good.
ladahl
I cant see this going well... Only way to ensure a proper look is to pull the heads IMO. This is a pretty easy DIY with steel shafts (as there is very little risk of ruing the shafts and no need for using a shaft puller, etc.) All you'll need is: a heat gun or torch, hook knife, a little sand paper, actone, proper epoxy, your ferrules
Nessism
Propane torch = $20 (or even less) You will need a hand drill or similar to dig the old epoxy out of the tip of the shaft. 100 grit sand paper can be rolled up and used to clean the hosel. Bottom line is you do not need to spend much money to do simple club building work. Do the job right or don't do it at all.
Kadin 25
All the above are correct. "Healing" and looking "Custom" have VERY DIFFERENT MEANINGS! I work on clubs a lot and I can tell you "healing" a ferrule (for me) is not easy and it doesn't look the same as new. Buy a torch, you can get epoxy small job packets from golfworks.com cheap.
bpark1210
I do all my clubwork and have seen many clubs worked on through our club builder at work who has 20+ yrs of experience. Never have I heard of or seen a "split ferrule." The whole idea seems like a train wreck waiting to happen. For a ferrule to fit it needs to be snug.
TWshoot67
There's only one way to do this..... and that is to do it correctly. Just like any job in life. Do it right the first time so your not paying 2- 3x's more to correct the initial screw up. JMHO.
RookieBlue7
I do all my clubwork and have seen many clubs worked on through our club builder at work who has 20+ yrs of experience. Never have I heard of or seen a "split ferrule." The whole idea seems like a train wreck waiting to happen. For a ferrule to fit it needs to be snug.
slicktry
I think I might go ahead and make a video on pulling a steel shaft....And prolly do a follow up on blowing grips on.
