How to Install a Shaft in a Golf Club
- Remove the old shaft. It can be done by melting the glue, or epoxy, that holds the shaft to the head of the club.
- Cut the shaft to the proper length, depending on what club you are modifying. There are websites that can help you determine the length.
- Roughen the tip of your new shaft before inserting it into the hosel of the club head. ...
- Apply epoxy to the tip of the shaft and the inside of the hosel of the club head, and insert the shaft into it.
- Prepare the shaft for its new grip. Place double-sided tape on the shaft where the grip will be placed and soak it with grip solvent.
How to install a new golf shaft?
Roughen the tip of your new shaft before inserting it into the hosel of the club head. If the shaft is made of steel, use a piece of sandpaper. If you are inserting a graphite shaft, it would be best to use a belt sander because you can easily damage it by using sandpaper.
Can you use epoxy to install a golf shaft?
Using epoxy to install a shaft is not a difficult task, but I think some people get a bit confused when dealing with different types of golf clubs. Putters are fairly easy to do, but when re-shafting irons and woods, we have to install the ferrule as well, which is a bit confusing to the novice.
How do you remove a broken shaft from a golf club?
It can be done by melting the glue, or epoxy, that holds the shaft to the head of the club. Use a blowtorch or a heating gun for this purpose. Aim it at the hosel--the connecting part of the head--until the epoxy softens and you can easily remove the shaft.
How to replace a broken hosel on a golf club?
If you are inserting a graphite shaft, it would be best to use a belt sander because you can easily damage it by using sandpaper. Also, rid the residue of the old epoxy for the hosel by using a wire drill bit. Apply epoxy to the tip of the shaft and the inside of the hosel of the club head, and insert the shaft into it.
How do you put a new shaft on a golf club?
0:335:54Golf Equipment : How to Change a Golf Shaft - YouTubeYouTubeStart of suggested clipEnd of suggested clipTool so we lay it in in this little groove right here. Which is going to slide back and forth andMoreTool so we lay it in in this little groove right here. Which is going to slide back and forth and put pressure and pull on the head. As the shaft is heated. Then we tighten the shaft.
How do you Reshaft a golf club at home?
2:2522:36GOLF CLUB BUILD - How to reshaft your irons Step by Step - YouTubeYouTubeStart of suggested clipEnd of suggested clipUp the house'll. Pull the shafts you don't need a shaft puller. Anything like that you can just heatMoreUp the house'll. Pull the shafts you don't need a shaft puller. Anything like that you can just heat them up and twist them off because it's a steel shaft.
How do you install a golf iron shaft?
5:117:44SHAFT INSTALL Steel - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the ferrule is in position take the head and push the ferrule into its final position tap theMoreOnce the ferrule is in position take the head and push the ferrule into its final position tap the butt of the shaft on a hard surface to ensure the shaft is installed to the bottom of the hosel.
Can I Reshaft my own golf clubs?
Reshafting is just one way to keep your clubs performing at a high level. You can also benefit from regripping your clubs. Replacing worn-out golf grips can help make your clubs feel new again. Adding the right shaft to your favorite clubs can get you back on the course and working toward a new personal low round.
Is it easy to Reshaft irons?
Golf irons can be a bit easier to reshaft than a driver. If you are reshafting with steel irons, it is usually pretty straightforward. However, you will need the proper tools and space to complete this project.
How much does it cost to get irons Reshafted?
The average cost to reshaft your golf clubs is $24 per club plus the cost of the shaft and grip. A new iron shaft and grip can range between $10 and $95 while a new driver shaft and grip can range between $18 and $440. The majority of the cost comes down to what type of shaft you want and what grips you like.
How do you attach iron head to shaft?
1:332:35Golf Equipment : How to Install Golf Club Heads on a Shaft - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we just literally take the take the shaft. And push it into that head until that epoxy comes outMoreSo we just literally take the take the shaft. And push it into that head until that epoxy comes out the top wipe the epoxy. Clean. Then let it dry mine i use 24-hour epoxy so we let that dry for 24.
Do golf shafts come with grips?
Yes. All purchases of pre-owned shafts include a grip.
How long does it take to Reshaft clubs?
It takes 24 hours to reshaft a golf driver. If you use an epoxy such as the Tour epoxy, you can get done with the reshafting process really fast and your driver will be ready to use in about half an hour.
Can you put a new shaft on a driver?
Replacing your old shaft can be a relatively painless process for you or your local repair shop. If your favorite old driver seems to have run out of quality hits, you might want to refresh it by adding a new shaft to the club.
Are steel shafts better than graphite?
Typically, steel shafts are much heavier, more durable and are generally less expensive than their graphite counterparts. They are more often than not made from stainless steel and they tend to weigh in between around 90g-120g. Torque or lateral twisting found in all graphite shafts is lower in steel irons.
How do you Reshaft a club?
Reshafting Golf ClubsStep 1: Secure the Club. Place the shaft in a vise and tighten it, if your shaft is made of steel. ... Step 2: Remove Existing Shaft. ... Step 3: Prepare the New Shafts. ... Step 4: Install the New Shafts. ... Step 5: Adjust as Needed. ... Step 6: Install the Grips.
Series Navigation
Using epoxy to install a shaft is not a difficult task, but I think some people get a bit confused when dealing with different types of golf clubs. Putters are fairly easy to do, but when re-shafting irons and woods, we have to install the ferrule as well, which is a bit confusing to the novice.
Series Navigation
Hey!! I'm Zach, the founder of The DIY Golfer. I created this site in 2015 while playing D1 collegiate golf to help myself understand the game of golf better and improve as a player. Fast forward a few years, and it has become much more than a journal.
Step 1
Remove the old shaft. If there is an existing or broken shaft on the club, the first step is to remove it. You need to break down the epoxy bond between the shaft and the head. To do this, you need to provide even heat to the hosel (where the club head attaches to the shaft). This can be achieved by using either a torch or a heat gun.
Step 3
Prep the new shaft. Measure the depth of the hosel and then mark this depth on the shaft. Note: When prepping the new shaft, always follow the manufacturer's recommended tip trimming guidelines. Should you be installing a graphite shaft, be careful that the graphite doesn't splinter, as this will weaken the shaft.
