How to Install a Shaft in a Golf Club
- Step 1. Remove the old shaft. It can be done by melting the glue, or epoxy, that holds the shaft to the head of the club.
- Step 2. Cut the shaft to the proper length, depending on what club you are modifying. There are websites that can help...
- Step 3. Roughen the tip of your new shaft before inserting it into the hosel of the club...
How to reshaft a golf driver?
How to Reshaft a Golf Driver. 1 Step 1. Prepare the tip of the new driver shaft by scraping the paint and polyurethane off with a sharp knife. Make sure you don't cut in to the shaft ... 2 Step 2. 3 Step 3. 4 Step 4. 5 Step 5. More items
Can you use epoxy to install a golf shaft?
Using epoxy to install a shaft is not a difficult task, but I think some people get a bit confused when dealing with different types of golf clubs. Putters are fairly easy to do, but when re-shafting irons and woods, we have to install the ferrule as well, which is a bit confusing to the novice.
Can you add a new shaft to an old driver?
If your favorite old driver seems to have run out of quality hits, you might want to refresh it by adding a new shaft to the club. A new shaft can put the wallop back in your trusty driver and have it hitting like a brand-new club. One of the nice things about replacing a driver shaft is that there is generally no tip trimming involved. Step 1
How to fix a loose golf shaft?
Apply epoxy to the tip of the shaft and the inside of the hosel of the club head, and insert the shaft into it. Make sure all surfaces of both are covered. To seat the shaft, rotate it inside the hosel, then tap the butt end of the shaft against a firm object to make sure it is in. Prepare the shaft for its new grip.
How do you install a driver shaft?
8:5217:05Golf Club Repair - How to pull AND install a golf shaft - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is a 335 shaft. See that there's a lot of room in there. And what we need is a ferrule likeMoreThis is a 335 shaft. See that there's a lot of room in there. And what we need is a ferrule like that to take up a space turns out these are one of the originals. So I take it and I put my ferrule.
How do you Reshaft a driver at home?
0:144:53How To Reshaft Golf Clubs - YouTubeYouTubeStart of suggested clipEnd of suggested clipHere just as the pocketable bandha looks better with it as you can see two of ours also prep the tipMoreHere just as the pocketable bandha looks better with it as you can see two of ours also prep the tip taken basically the paint off the shaft that way to here to the epoxy.
Is it easy to Reshaft a driver?
Replacing your old shaft can be a relatively painless process for you or your local repair shop. If your favorite old driver seems to have run out of quality hits, you might want to refresh it by adding a new shaft to the club.
How do you install a graphite driver shaft?
4:297:38How to Install Graphite Golf Shafts - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe butt of the shaft on a hard surface to ensure the shaft is installed to the bottom of the hosel.MoreThe butt of the shaft on a hard surface to ensure the shaft is installed to the bottom of the hosel. Remove the head and place some epoxy inside the hosel dip the tip of the shaft into the epoxy mix.
Is it worth Reshafting my driver?
If you have a newer model driver and the shaft happens to break, it is worth replacing. If you just purchased a driver but have suddenly had a significant increase or decrease in swing speed, it is probably worth reshafting.
How much does it cost to put a new shaft on a driver?
A new iron shaft and grip can range between $10 and $95 while a new driver shaft and grip can range between $18 and $440. The majority of the cost comes down to what type of shaft you want and what grips you like. The cheapest shafts you can get are somewhere around 10 bucks each.
How long does it take to Reshaft a driver?
How long does it take to reshaft a driver? It takes 24 hours to reshaft a golf driver. The actual time depends on the epoxy used for this process. If you use an epoxy such as the Tour epoxy, you can get done with the reshafting process really fast and your driver will be ready to use in about half an hour.
What's the best shaft for driver?
The 10 BEST DRIVER SHAFTS 2022Project X HZRDUS Smoke Shaft (Best Overall)Mitsubishi Diamana Driver Shaft (Best for Quality)Mitsubishi Tensei CK Pro Series (Most Versatile Shaft)Fujikura Vista Pro 60 Driver Shaft (Best Club Head Speed)Aldila NVS 55 Shaft (Best for Boosting Distance)More items...•
What does a stiffer driver shaft do?
Stiff shafts produce lower torque (resistance to twisting) and go well with high-speed swings. Lower speeds should opt for a regular shaft that produces greater torque, to assist them with their launch speed.
How do you Reshaft a golf club at home?
2:3522:36GOLF CLUB BUILD - How to reshaft your irons Step by Step - YouTubeYouTubeStart of suggested clipEnd of suggested clipUp the house'll. Pull the shafts you don't need a shaft puller. Anything like that you can just heatMoreUp the house'll. Pull the shafts you don't need a shaft puller. Anything like that you can just heat them up and twist them off because it's a steel shaft.
Are steel shafts better than graphite?
Typically, steel shafts are much heavier, more durable and are generally less expensive than their graphite counterparts. They are more often than not made from stainless steel and they tend to weigh in between around 90g-120g. Torque or lateral twisting found in all graphite shafts is lower in steel irons.
What does prepping a golf shaft mean?
GOLF CLUBS INSTRUCTION SERIES. STEP 3b. Graphite. Shafts: Lightly sand shaft from tape to tip with 150 grit or finer sand paper to remove the polyurethane finish and all the paint. This operation is "prepping" the shaft and can be done by The GolfWorks (PREP).
How do you Reshaft a golf club at home?
2:3522:36GOLF CLUB BUILD - How to reshaft your irons Step by Step - YouTubeYouTubeStart of suggested clipEnd of suggested clipUp the house'll. Pull the shafts you don't need a shaft puller. Anything like that you can just heatMoreUp the house'll. Pull the shafts you don't need a shaft puller. Anything like that you can just heat them up and twist them off because it's a steel shaft.
Where can I Reshaft my driver?
When it comes time to reshaft your clubs, you might be inclined to do it yourself. But if you're unfamiliar with the process, you can visit the Golf Services PROS at your local DICK'S Sporting Goods to get help with the repair. Their Certified Fitters can match you with a new shaft that best complements your game.
How long does it take to Reshaft a driver?
How long does it take to reshaft a driver? It takes 24 hours to reshaft a golf driver. The actual time depends on the epoxy used for this process. If you use an epoxy such as the Tour epoxy, you can get done with the reshafting process really fast and your driver will be ready to use in about half an hour.
Can you put any shaft in a driver?
Yes, most golf Driver shafts are interchangeable. Golf driver shafts can be replaced as long as the new shaft is the same length and made by the same brand of golf club.
How to remove a golf club shaft?
Step 1. Remove the old shaft. It can be done by melting the glue, or epoxy, that holds the shaft to the head of the club. Use a blowtorch or a heating gun for this purpose. Aim it at the hosel--the connecting part of the head--until the epoxy softens and you can easily remove the shaft.
What to use to insert graphite shaft?
If you are inserting a graphite shaft, it would be best to use a belt sander because you can easily damage it by using sandpaper. Also, rid the residue of the old epoxy for the hosel by using a wire drill bit.
How to put on a golf grip?
Place double-sided tape on the shaft where the grip will be placed and soak it with grip solvent. Pour a small amount inside the grip, then swirl it around until it is completely covered. Pour out the remaining solvent onto the double-sided tape, then put on the grip, making sure it is firmly set on the butt of the club.
Can replacing a golf club shaft save money?
Rather than purchasing a new club, replacing the shaft on a golf club can save a golfer money.
How much does a driver shaft cost?
It always comes down to price at the end of the day and we are always looking for the best deal. A driver shaft can cost anywhere from $40 – $300.
What does playing the right length driver shaft do?
Playing the right length Driver Shaft will increase your accuracy!
What is a tip stiff shaft?
Some shafts are ‘tip-stiff’, meaning the tip section near the clubhead is stiffer in relation to the rest of the shaft. Or ‘grip-stiff’ which keeps the upper end of the shaft firm to help reduce spin.
Why do you need torquing shafts for a high speed swing?
It is very helpful for your miss-hits and for when you make a bad swing. If you’re swinging badly at a high velocity then you need all the help you can get to keep the face as square to the ball as possible.
What happens if your golf shaft is too light?
A shaft that is too light will cause you to swing out of control and lose consistency. You may lose feel too, which is very important when hitting the driver since it is the longest club in your bag.
What is torque in golf?
Torque refers to how much the shaft twists. It’s the least talked about feature but still an important one to club fitters. High torque shafts can twist easily, and low torque shafts are resistant to twisting.
How many flexes are there on a shaft?
The most common measurement we find on a shaft is its flex. There are five different flexes;
How does extending a golf shaft affect swing weight?
6. Remember that extending the shaft will make it feel a bit more flexible and that every ½” longer the shaft becomes will increase the club’s swingweight 3 points. The total weight of the club will increase equal to the weight of the extender and epoxy as well. The club’s balance point will move toward the grip end as well due to the longer length of the club.
How far should a steel shaft be extended?
1. Never extend a steel shaft more than 2″. Any more may cause premature failure due to stress where the extension is made. The only exception would be putter shafts.
Can you use wood dowels to extend steel shafts?
Wooden dowels can also be used to extend steel shafts, but these require much more work (in our opinion) than using steel extenders. 3. Always epoxy the extension in place, do not rely on a pressure fit. 4. Abrade the extension piece prior to installation to give the epoxy a better hold.
Is it safe to extend shafts?
Extending shafts is a common and profitable repair. Following the above common-sense rules will make the repair practical and safe.
Can you use graphite shafts as extenders?
5. Saving your old graphite shafts to use as shaft extenders will save you money and will make a perfectly acceptable extender.
How to prep a new driver shaft?
Prepare the tip of the new driver shaft by scraping the paint and polyurethane off with a sharp knife. Make sure you don't cut in to the shaft or create a flat spot by scraping too much.
What does a new shaft do for a driver?
A new shaft can put the wallop back in your trusty driver and have it hitting like a brand-new club. One of the nice things about replacing a driver shaft is that there is generally no tip trimming involved.
How to secure a ferrule on a golf club?
To do this, place a small amount of epoxy on the inside of the ferrule and slide the ferrule onto the shaft, narrow end first. Place your clubhead on top of the ferrule and place the grip end of the club on the floor. Butt down the grip while pushing down on the clubhead to secure the ferrule at the correct depth on the hosel.
Can you replace a shaft?
Replacing your old shaft can be a relatively painless process for you or your local repair shop.
Flex/Frequency
Length
- The length of your driver shaft will help you control the directionof the ball more. A shorter shaft will give you better accuracy. A longer shaft will give you more distancebut will cost you some fairways in regulation. You will sense a theme in this article that the name of the game is to find balance, and that includes length. There is a perfect length for you. A shorter driver will also affe…
Weight
- The weight of your shaft is going to primarily affect your distance. A heavier shaft will reduce your clubhead speed and thus the amount of energy transferred into the ball. But it’s not as easy as just going out and getting a lighter shaft. A shaft that is too light will cause you to swing out of control and lose consistency. You may lose feel too, which is very important when hitting the driver sinc…
Kickpoint
- Now we are getting into some in-depth driver talk. This is a word you may not hear too often amongst your weekend foursome pals. This refers to a spot or small range on the shaft where it experiences the most bend under duress or that of a golf swing. I’m sure you noticed that the grip end is thicker than the clubhead end. This tapering is different with each shaft and will affect ho…
Torque
- Torque refers to how much the shaft twists. It’s the least talked about feature but still an important one to club fitters. High torque shafts can twist easily, and low torque shafts are resistant to twisting. Not to sound like a broken record but generally, you want your torque to be not too high and not too low. Based on your swing speed, your club fitter can determine how mu…
Cost
- It always comes down to price at the end of the day and we are always looking for the best deal. A driver shaft can cost anywhere from $40 – $300. Yes, one shaft without a head or grip on it can cost $300+. Not many people want to drop that much cash on half of a driver. But that should be proof of how much science and technology goes into these so that we can all hit it a little furthe…
Conclusion
- Fitting yourself for a driver shaft is a bit like trying to do your own plumbing. You could do it yourself but if you get something wrong then you might end up in the water. It’s just easier to hire a trained professional and get it done right from the beginning. Getting fit for a driver shaft is a great learning experience and you will feel like a professional when you get to see all your numb…