How does a Ram air intake work?
Ram-air intakes usually pull cool air from the bumper area. Because they are designed to be at the front of the car, they actually press urize the cool air coming into the engine as the car moves faster. This provides maximum airflow and maximum benefits. It is also the most complicated to install since you will likely have to install part of the system from underneath the car. You may even have to remove your bumper.
How to replace an aftermarket air intake?
Replacing your air intake is relatively easy if you have a screwdriver and wrench or socket set. Make sure your engine’s cool and your battery is unplugged before you remove your old air intake. You’ll need to remove the air filter, the filter box, and tube running to the engine bay. Once you’ve removed the old air intake, slot your aftermarket one in its place and secure it with a wrench. For more tips, including how to choose an aftermarket air intake, read on!
How to remove air intake?
Remove the air intake system. This consists of removing the air filter, the filter box, and the tube running from the filter box to the opening in the engine bay. Some of these parts will be attached to the engine bay by small plastic mounts. You will need a wrench or socket set to remove the small bolt holding the mounts in place. Some pieces of the intake system are fastened to each other with hose clamps, which can be loosened by turning the small bolt on the end with a screwdriver or socket.
Why is the cooler air better than the air inside the engine compartment?
The cooler air is denser than the air inside the engine compartment so it gives a better boost to performance and gas mileage than short-pipe designs.
Is an air box necessary for a cold air intake?
Community Answer. The air box is no longer necessary if you're planning to add a cold air intake. It's rather pointless to do, since it's a plastic enclosure which soaks up heat from the engine, while an aftermarket air intake goes around the engine to avoid that. Thanks!
Do you test drive a new intake?
Test drive your new intake! You want to make sure that the intake is functioning properly before you hit the open road.
Do you need to remove air sensors?
You may need to remove one or more air sensors which feed information to the car's computer. These should be handled very delicately.
