How to install an amp and subwoofer in a car?
Installing your amp & subwoofer. Route the positive wire cable to the car battery and hide it underneath the carpet and interior trim on the battery side of the vehicle. In order to ... Connect the positive wire to the fuse holder. Connect the positive cable securely to the battery. Connect the ...
How do you wire a subwoofer to a speaker wire?
The easiest way to join this wire with the one you’re using for the subwoofers is with a plastic connector, like a crimp connector or Posi-connector. Strip 1⁄2 in (1.3 cm) off the remote wire and stereo wire, crimp them, then plug them into the connector so the exposed ends contact one another.
Why won't my subwoofer work with my amp?
Make sure your subwoofer and amp aren’t touching metal or else they won’t work. To avoid this, you could use mounting brackets to install the amp on top of the subwoofer enclosure. Thanks!
How do you connect an amp to a subwoofer enclosure?
The amp should be set up next to or on top of the subwoofer enclosure. If it is separate from the subwoofers, it may have its own colored wires to connect to the ones on the stereo. Use more crimp connectors or solder the wires together as needed. Otherwise, use the existing cables to connect it to your sound system.
How do you hook up amps and subwoofers to a factory radio?
0:036:05How to: Add Aftermarket Subwoofer and Amp to Factory Stereo. - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the first thing you do is you want to run your power cable. So you'll see there's a fuse. So ifMoreSo the first thing you do is you want to run your power cable. So you'll see there's a fuse. So if you get an amp wiring kit it'll come with that.
How do I install an amp and subwoofer in my car?
0:0414:22How to install an amp and sub in your car | Crutchfield video - YouTubeYouTubeStart of suggested clipEnd of suggested clipDown the passenger side of the car. All the way into the back into the hatch area where we're goingMoreDown the passenger side of the car. All the way into the back into the hatch area where we're going to install this.
What do you need to install a subwoofer and amp?
For the installation, you need:A 20 ft (6.1 m) power wire.A ground wire at least 3 ft (0.91 m) long.A 15 ft (4.6 m) RCA wire with both red and white connectors.A 15 ft (4.6 m) blue remote wire.Speaker wire, which can also be bought separately.A 50-amp in-line fuse and fuse holder.More items...
How do you hook up subs to a factory car stereo?
As shown in the diagram below, to receive an input signal from your factory car stereo you would just need to tap into your rear speaker wires. Then, you would run RCAs from your LOC to your amplifier. Finally, connect your subwoofer to the amplifier using speaker wire as you would normally.
How much does it cost to install subwoofers and amp in car?
A: Standard installation is $149.99 (https://bby.me/zaahw) A materials charge of $5 per vehicle will be assessed at time of installation, and standard installation does not include vehicle-specific parts or accessories. For subwoofer installation, parts typically cost $20–$300, but will vary.
Do you need an amplifier for a subwoofer?
Do You Need An Amplifier for Your Subwoofer? In nearly all cases, the answer is yes. Unless you have a system in your car or boat that is already powering a subwoofer, you'll need to find an amplifier that will power your sub.
Are subwoofers hard to install?
Installing a subwoofer in your car is often hard work depending on the vehicle and what you'll need to go through for installing and hiding the wire. If you're adding a subwoofer to a factory system you should definitely prepare for extra work.
Which amp is best for subs?
Car stereo amps range from one to six channels. A mono-channel amp is often ideal for powering subwoofers since it can output a lot of power with low impedance.
How much does a sub installation cost?
You will likely want a 100% copper wiring kit for optimum sound quality, with reliable wiring kits costing between $30 and $60. THE TOTAL COST OF SUBWOOFER INSTALLATION Add all of the components up, and your total cost of subwoofer installation can range from $100 to over $600.
Can I just add a subwoofer to my car?
And it's actually quite easy, thanks to simple subwoofer upgrades from the aftermarket that can be added to almost any existing car stereo system. Adding a subwoofer to your audio system generally means also having to purchase and install an amplifier to power it.
Can I add a sub to my stock stereo?
So now you know – it's definitely possible to install a subwoofer and amplifier to your factory system, and still have it sounding good. If you'd like to know more about how to get a killer system set-up in your car without swapping your stereo, give us a call at 510-527-9888.
Can I add an amp to my factory stereo?
Usually, you'll be installing a 4-channel amplifier with speaker-level inputs. The best way to connect it to a factory system is to tap into the stereo's speaker outputs for the amp's input signal. Then send the amp's outputs back to the stereo's harness, and on to the speakers through the factory wiring.
What is a car powered subwoofer?
A car powered subwoofer is one that is an all-in-one bass system made up of a special enclosure, matching subwoofer, and has an amplifier already built-in. They’re easier to install than a separate amplifier/subwoofer system.
What wires are used in amplifier wiring kits?
Some only contain a fuse holder, fuse, power wire, ground wire, and the remote lead wire (typically an 18 gauge wire). Others also include RCA cables and speaker wire.
What is the minimum impedance for a single channel amp?
Many amps, both single channel or bridged multi-channel amps, require a minimum speaker impedance (Ohm rating) of 4 Ohms, so bear this in mind when shopping. You can learn more about that here.
Can you waste money on speaker wire?
Don’t waste money on overpriced speaker wire. The main thing to remember is to buy quality wire – preferably a name brand type – with good insulation and good conductors. One wire is marked as the positive lead so you can connect it properly.
Is 20 gauge wire good for speaker wire?
Sometimes the CCA note is in small print. When connecting to a factory system with no RCA jacks, expect to also pick up a roll of small gauge wire (18 or 20 gauge is good) of sufficient length to go from the vehicle’s speaker wiring to the amplifier.
What is a subwoofer?
Subwoofers are speakers that play low-pitched sounds called bass and sub-bass. Wiring one into an existing system isn’t as tricky as it first seems. Subwoofers require a lot of power, so they have to be wired to both a power source, like a car’s battery, and an amplifier.
What is the blue wire on a stereo?
Your stereo will have a bunch of colored wires inserted into a black connector. The blue wire may be plugged into this connector or left loose. The easiest way to join this wire with the one you’re using for the subwoofers is with a plastic connector, like a crimp connector or Posi-connector.
Why won't my subwoofer sound the same?
The reason is that you’re not enhancing the voltage of the stereo, and therefore aren’t giving it the proper “juice”.
What is a JL Audio LOC 22?
The JL Audio LOC-22 is a great example of a premium line out converter: This little puppy can even work if you have a premium factory system in your car – but still want to get more bass. It takes the hi-level signals ...
