- Flex. Generally speaking, a driver shaft that’s too stiff will cause shots to launch too low, with too little spin and low peak heights.
- Weight. The weight of a shaft has a similar correlation to performance as flex. ...
- Length. Of course, the length of your driver shaft will significantly change how the golf club feels, but length affects strike point, too.
- Kick point. According to Briand, a high bend point will lower ball flight and a low bend point will raise ball flight.
- Torque. A low torque measurement means that a shaft has greater resistance to twisting, while a high torque measurement means it will twist more easily.
What type of golf shafts are right for You?
- Steel shafts are less expensive than their counterparts’ graphite and multi-material shafts.
- As these shafts are made with heavy steel, you will get great control over the golf club you are using.
- Though these shafts will ensure control, you may suffer when it is about taking the ball some extra yardages. ...
What are the best golf shafts?
best golf shafts for irons
- UST Recoil ZT9 Iron Shaft Set. UST Mamiya Recoil ZT9 Iron Shafts are known for the best and unparalleled stability in the industry.
- Aerotech Steel Fiber FC 90. The new SteelFiber FC shafts are designed with a progressive tip that gives higher ball flight in the mid- and long irons also classic ...
- Mitsubishi-Rayon Kuro Kage Black 70 Iron R Shaft. ...
Should golf beginners play with a stiff shaft?
Stiffness or Flex
- Swing Speed. The stiffness or flex of the shaft is a much-neglected aspect of your golfing equipment as most golfers are more interested in the brand, or technical features, or ...
- Indications. ...
- Over Correcting. ...
- Classification. ...
- Beware, Don’t Over-Compensate. ...
What shaft should I buy?
Some golfers will decide which shaft they need based on swing speed alone. If your swing speed is between 75 and 85 miles per hour, then you will need a senior shaft. If you are between 85 and 95 miles per hour, then the regular shaft will be the best choice. You can get your swing speed measured at a local golf fitting center.
How do I know which shaft is right for me?
If your drives carry less than 200 yards, you should probably have Ladies shafts, and if your ball carries between 200 and 225 yards, you should buy clubs with Senior shafts. Generally, if there is a doubt about which shafts you should have, choose the softer shafts.
How do you know if you need regular or stiff shafts?
To check your swing speed a shot tracking device will be the most accurate method. Based on your swing speeds here are our recommendations: 80-95 mph swing speeds should use regular shafts. 90-105 mph swing speeds should use stiff shafts.
How do I know if I need steel or graphite shafts?
There used to be a basic rule for iron shafts – if you're a strong, competitive player you choose steel, and if you're older, slower, a woman, or generally not athletic, you choose graphite. Steel shafts were always known as exceptionally consistent while graphite was unpredictable and overly light and flexible.
What flex should a beginner golfer have?
But if a beginner player already has a decent swing motion and generates clubhead speed between the range of 95 to 110 mph or more, then a stiff shaft or extra stiff shaft could be justified to be used by a beginner golfer.
What flex shaft do I need for irons?
Should You Use Regular or Stiff Flex Shafts?6-iron Carry Distance6-iron Swing SpeedShaft flex (all clubs)< 130 yards60 – 70 mphSenior Flex131 – 155 yards71 – 80 mphRegular Flex156 – 175 yards81 – 90 mphStiff Flex> 176 yards91 + mphX-Stiff FlexApr 13, 2021
When should a golfer switch to graphite shafts?
To date, plenty of golfers can benefit from iron shafts that weigh less than 60 grams and that's still the primary use case for graphite iron shafts. Golfers with slower swing speeds can benefit from lighter shafts than help them swing faster which creates higher launch, more ball speed, and ultimately more distance.
Do any pros use graphite shafts?
In total 100% of the top 100 PGA Tour pros use graphite shafts in their drivers, fairway woods and hybrid clubs. 14 out of the top 100 use graphite shafts in their utility irons while 21 pros use steel.
Should a beginner golfer use a stiff shaft?
With the proper fit, the new golfer can learn without making compensations for clubs that are too stiff or too flexible. In general, the faster a golfer's swing speed the stiffer a golf shaft should be in order to provide more control over the ball's flight.
How do I know if I need stiff or regular flex irons?
If you have a slower swing speed, you are probably going to want to choose regular shafted clubs because the additional flex will provide a little more power and accuracy. When you swing harder, the stiff flex will be more controlled and give you the punch you need to hit better shots.
How do I know if I need a stiffer driver?
If you're swinging the driver above 105 mph, it might be time to get some X stiff shafts in your set. Stiff – This range is still considered fast, but you most likely won't be out on Tour anytime soon. If you're between 97 and 104 mph with the driver, you need a stiff flex.
Do I need a stiffer driver shaft?
A good tip for working out what flex you need is the 150-yard test. If you can hit an 8- or 9-iron 150 yards, comfortably, then a stiff shaft is for you. This means that you will have a driver swing speed of around 100 mph and you will see the benefits of a stiff shaft.
When should I use stiff shaft irons?
Who should use stiff flex irons? The starting point for this is swing speed, if you swing your driver between 90-105 mph then you will probably need a stiff shaft. This will benefit you by delivering great control of your club during your swing and stop you spraying it everywhere.
What to know about golf shafts?
In today’s guide we will review everything you need to know about golf shafts. Picking out the proper golf shaft is very important as it will impact several components of your golf swing. For example, picking the wrong golf shaft flex can cause you to hook or slice the golf ball. It also can hinder the total distance the ball flies by having too much spin or too low of launch. But don’t worry, at the end of reading today’s guide you’ll be much more educated on the buying process and how to pick out the right golf shaft. Lets Get Started!
What shafts do golfers use?
For most golfers, a graphite shaft works great. Most iron sets are made with graphite shafts as well so you get that material type by default usually unless you specifically seek out steel shafted irons. With steel shafts, you may find that golf shots are easier to control.
How to determine golf shaft flex?
Start by using a launch monitor to analyze your golf swing speed. If your swing ranges between 85 mph and 95 mph then you should start with a regular flex. If your swing speed is faster than 95 mph, then you should try a stiff shaft.
What is the best shaft for golf?
Steel – A steel golf shaft is usually stronger and more durable (less likely to snap) than a graphite shaft. It’s also less expensive and sometimes stainless steel is used in the creation of the steel shaft. There is also two variations, stepped steel and rifle steel.
Why does my golf shaft have a slice?
When the golf shaft is too stiff, it doesn’t unload properly at impact. This can lead to the face staying open and result in a slice golf shot. Beware, a slice isn’t always an indication the shaft is too stiff so if you already have a slice, it could be caused by another fault in your golf swing.
Why do golf clubs have shafts?
During the golf swing the shaft causes deflection (bend) that causes the clubhead to be in a forward and toe downward position relative to the grip of the club.
What is the most common shaft material used in golf clubs?
Graphite Shafts. Graphite – this type of shaft is usually lighter weight compared to a steel shaft but it’s less durable and more expensive to make. Graphite is one of the most common shaft types used in golf clubs and can arguably be considered the main shaft material used, beating out steel.
Why is shaft length important in golf?
An increased shaft length creates a greater swing-arc, which relates to more distance. Shorter stature golfers often increase the length of the shafts and stand further away from the ball. The longer the shaft the less control and this is where fitment assists.
What weight shafts are available for clubfitters?
Clubfitters now have the option to fit these shafts with weights from 95 to 110gm. This is a reduction from the 115 to 125gm range previously on offer. Steel generally has less flex, more stability, low torque, and provides more accuracy. Standard steel shafts are shorter.
What is carbon fiber shaft?
Modern composite graphite shafts have 3 layers of fiber winding, adding substantial rigidity and performance. Carbon fiber offers increased flex, greater clubhead speed, but reduced accuracy, due to more torque. It also dissipates the stinging shock from a poorly struck shot and will protect the hands and wrist.
What is flex in golf?
Flex. Put very simply, flex is the amount of bend in the shaft. It affects launch angle, spin, ball flight, control, carries, and distance. Shafts are qualified in different ways but reference to flex is the most important. Powerful swings require stiffer shafts which put less load on the shaft.
What happens if you don't have a stiff shaft?
The result is a loss of distance. Added to this the direction control will be lost.
When did steel shafts become legal?
Finally in 1924 steel shafts were legalized and Billy Burke was the 1st to win the US Open with steel. From 1960 to 1970 the aluminum shaft was introduced but besides expensive, it broke very easily. Then followed graphite shafts, displayed at the 1970 PGA merchandise show for the first time.
Is there a real standard for shafts in golf?
It is accepted within the golf industry that there are no real standards when it comes to shaft manufacture and the different properties they all claim to have.
What is a golf shaft?
When it comes to performance the golf shaft has been referred to as the transmission of the golf club. The flex, length, and weight can all effect how you are hitting a golf ball. In fact, the correct shaft can help any golfer hit the ball straighter and farther. Take a closer look at the different types of shafts usually offered, and find the one that’s best for your swing.
What shafts are best for a senior golfer?
With greater swing speeds and flex you will lose some accuracy with the club. Graphite shafts are best suited for senior golfers and lady golfers who cannot produce a lot of swing speed.
Why is flex important in golf?
Flex. The most important factor when buying a shaft is the flex because it affects your distance and direction. In essence flex is the ability of a golf shaft to bend during the golf swing.
How long is a golf driver shaft?
The standard retail driver shaft measures 45.5 inches. If you have not been fitted for clubs, then this is likely the length of your driver shaft. Longer shafts help you to generate accelerated clubhead speed. However, it becomes more difficult to control the clubhead, increasing the risk of off-center strikes.
What are the characteristics of a driver shaft?
There are three core characteristics of a driver shaft, length, flex, and weight. All three of these elements need to combine harmoniously to deliver optimal performance. Below I have outlined the importance of each factor and how it impacts the result of your shot.
What is a driver shaft?
Driver shafts come in varied flex, weight, and length options, all designed to assist different golfers. The correct driver shaft is vital to achieving your desired spin rate, launch angle, shot shape, carry, and total distance. For example, faster swinging golfers may generate too much spin and height with a softer driver that has more flex.
Why is clubhead speed important in golf?
This increases the club head speed on the downswing. Clubhead speed does not guarantee a great golf shot, but it helps to amplify the C.O.R at impact.
What happens if your driver shaft is too heavy?
If your driver shaft is too heavy, it will cause you to achieve a lower flight and less spin off the tee. This could significantly reduce your carry distance and total distance. On the other hand, if your shaft is too light, you will likely balloon your drives and gather excessive spin.
Why are shafts so stiff?
On the flip side, shafts that are too stiff for your swing will deliver low levels of spin, low ball flight, and also reduced your carry and total distance. Golf.com’s Andrew Tursky suggests that if you are struggling to generate a higher ball flight and are losing carry as a result.
What is torque in golf?
Torque. Simply put, torque measures the shaft’s ability to resist twisting. Shafts with low torque can withstand twisting, making this option suitable for faster swinging golfers or those of you who tend to hook the ball. These shafts often carry a higher price tag in comparison to the higher torque options.
What is the shaft of a golf club?
Many consider the golf shaft the "engine of the club". Golf shafts are either made from graphite or steel. Both types have its benefits and disadvantages. Either way, the golf shaft is where power is stored and released at impact. Sitting in between the golf grip and club head, a solid connection is what allows the golf shaft to do its job.
What is shaft flex?
Shaft flex is a description of how much a shaft will bend under the force of a golf swing with a head attached at the tip end. The speed and frequency of your swing will determine what flex you need. There are generally 5 different flex notations (from most bendable to least bendable): A-flex (Senior), L-flex (Ladies), R-flex (Regular), ...
How long is a 0.370" iron shaft?
decreasing in length from #3-PW). 0.370" parallel iron shafts arrive in uncut lengths, usually 41" or 42" for irons or 46" or more for woods.
What happens if you swing too heavy?
If the overall club is too heavy, you can lose swing speed which can result in a loss of yardage. Too light of a club will be hard to guide and control which can lead to mishits. Players with faster swing speeds or more accelerated tempos can benefit from heavier shafts.
What shafts do you need for a slow swing?
Slow swing speeds will generally require softer-flex shafts, while high swing speeds need stiffer shafts; due to variations in swing patterns, however, swing speed is only one portion of finding the right shaft. Briand’s recommendation is to use your current driver shaft as a baseline.
What happens if you have a longer shaft?
As Briand says, a longer shaft will cause a less consistent strike on the face, and the golfer will tend to hit the ball closer to the heel. A shorter shaft, on the other hand, will cause a more consistent strike pattern, but impact location will tend to be on the toe. A golfer’s physical size, arm length, swing speed, consistency, ...
What does low torque mean on a shaft?
5. Torque. A low torque measurement means that a shaft has greater resistance to twisting, while a high torque measurement means it will twist more easily.
What happens if your driver shaft is too stiff?
Generally speaking, a driver shaft that’s too stiff will cause shots to launch too low, with too little spin and low peak heights. A shaft that’s too weak, on the other hand, may cause shots to spin too much, fly too high, and widen dispersion patterns.
How tall is Rickie Fowler's shaft?
A look at Rickie Fowler's fairway wood shaft, which measures 42 inches with 0.5 inches of tipping. Fitting a golfer into the exact right shaft for them over the internet is a tall, if not impossible, task. All driver swings are different, and there are so many options on the current market. Shafts are made with different flexes, lengths, weights, ...
Does tipping a shaft change the bend point?
Remember, though, that tipping a shaft will change the bend point, and it’s also irreversible, so make sure you know the purpose behind tipping your shaft. 2. Weight. The weight of a shaft has a similar correlation to performance as flex.
Does a high bend point lower or raise the ball?
According to Briand, a high bend point will lower ball flight and a low bend point will raise ball flight. So, if you tend to have a ball flight that’s too high, look for shafts that have a high kick point, and vice versa. It’s important to note that variations in length and shaft tipping will impact the designed bend point of a shaft.
1. The basics of shaft flex
Jonathan Wall, Managing Equipment Editor: If you’re new to the game, just worry about shaft flex. There are a few shaft manufacturers who choose to use something other than SR, R, S, X, TX, to designate the flex on a driver or fairway wood shaft, but most use the same lettering.
2. Know the big five
Andrew Tursky, Senior Equipment Editor : There’s five main points you’ll want to know when it comes to shafts.
3. It influences the way you swing
Luke Kerr-Dineen, Game Improvement Editor: Your equipment and your golf swing work dynamically together. It’s a relationship, where one effects the performance of the other.
