Thread your laces down through eyelet 2, keeping them as flat to the shoe as possible. Pull both ends of your shoelace out through eyelet 1. Cross your laces one at a time under everything you've done so far and thread them down through eyelet 5. Pull both ends of your laces out through eyelet 6.
Full Answer
How to lace a star lace on shoes?
Take your other lace that's been waiting at the top of the shoe and thread it under the right eyelets and then out eyelet 2, which should already be occupied. Keeping that lace in your hand, bring it up and flip it over the top horizontal line between the 5th eyelets, forming the top of your five-pointed star.
How do you lace shoes with 5 shoelace holes?
Alternative Straight-Lace Method. Method for shoes with five-pairs of shoelace holes. Place one end of the shoelace through the first hole, inside step (i.e., the left hole nearest the heel on a right shoe) and pull through to leave about 6 inches (15.2 cm) of lace outside.
How do you make a five-pointed star with lace?
Keeping that lace in your hand, bring it up and flip it over the top horizontal line between the 5th eyelets, forming the top of your five-pointed star.
How do you use the 4th method of straight lacing?
Method 4 Alternative Straight-Lace Method. Place one end of the shoelace through the first hole, inside step (i.e., the left hole nearest the heel on a right shoe) and pull through to leave about 6 inches (15.2 cm) of lace outside.
How do you lace Converse One Star?
7:1810:207 WAYS TO LACE CONVERSE CHUCK TAYLOR ALL STAR HIGH ...YouTubeStart of suggested clipEnd of suggested clipThis is a very unique way of lacing your Chuck Taylors. So now we're done with this I grab the otherMoreThis is a very unique way of lacing your Chuck Taylors. So now we're done with this I grab the other one once again go under skip through pull I'm just gonna keep this going all the way up. So.
How do you tie all star laces?
4 Method 4 of 4: Bar LacingUnlace the top 2 eyelets of your shoes. ... Pull the outside lace across the tongue and into the first side hole. ... Slide that same lace through the second side hole. ... Lace your laces back through the top eyelets. ... Tie your shoes up again.
How do you lace Converse normally?
5:487:10HOW TO BAR LACE CONVERSE (BEST WAY!) - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then what you're going to want to do is take the laces. And do a factory knot so just wrap theMoreAnd then what you're going to want to do is take the laces. And do a factory knot so just wrap the laces around your two fingers. And then tuck the lace. Up through the hole. Just like that.
How do you lace Converse platforms?
0:193:51HOW TO LACE CONVERSE (STANDARD Way) - YouTubeYouTubeStart of suggested clipEnd of suggested clipUnder the sneaker tongue. And when you lace on top of that it creates nice even laces instead of aMoreUnder the sneaker tongue. And when you lace on top of that it creates nice even laces instead of a looser lace at the bottom and a tighter lace at the top. Now you can go ahead and get your lace.
How do you lace high tops without tying them?
1:494:02HOW TO HIDE YOUR LACES (Easy + Fast Shoelace Hack) - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then make sure that top lace is luke from the outside in not inside out next you want to liftMoreAnd then make sure that top lace is luke from the outside in not inside out next you want to lift the insole. From the back of the shoe. And then tuck the laces underneath it.
How do you lace high tops to slip on?
2:075:26How To Lace Trainers - Easy Tutorial - Nike Blazer High Tops - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo place the lace like so over the outside of the trainer. And then lace through keep on going andMoreSo place the lace like so over the outside of the trainer. And then lace through keep on going and make sure your lace is always on top following this step fix any twists in the. Lace.
Are you supposed to tie converse?
0:132:41The Best Way To Tie Your Converse Shoes - Secrets Of A Stylist - YouTubeYouTubeStart of suggested clipEnd of suggested clipOn. Then what you're going to do is you're going to take the tab take your laces. And make a boatMoreOn. Then what you're going to do is you're going to take the tab take your laces. And make a boat underneath. The tongue then I flipped the tab over and I've tied a bow now. I'm going to tuck the bow.
How do you lace converse with a tongue loop?
Use the extra eyelets at the top to pin the tongue down. Leave a little room to create a 1⁄2–1 in (1.3–2.5 cm) loop. Then, run each lace through the loop on the opposite side and pull tight before tying your shoes. This holds your tongue in place by pinning it down once your shoes are tied.
What are the holes on the side of Converse for?
Turns out, the holes in the sides of Converse have a purpose I know I have. Well, wonder no more - it turns out their first purpose is to provide a little ~ventilation to your feet. The holes allow air to circulate around and stop your feet getting all sweaty.
How do you lace low top Converse without ties?
2:264:00Best Way to TIE Converse Shoes & HIDE LACES!! ..... and ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo there we go make yourself a bow depending upon whatever you like tuck it under the tongue. Here.MoreSo there we go make yourself a bow depending upon whatever you like tuck it under the tongue. Here. Like that then you're gonna slip your foot. Right on in get the tongue.
How do I make my laces look cool?
1:503:36HIDE Your Laces Like A Pro | Super Clean Look - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe tongue to do this all you have to do is to put on your shoes. And tie laces as usual. And thenMoreThe tongue to do this all you have to do is to put on your shoes. And tie laces as usual. And then you just simply tug the laces underneath. The tongue off your shoes.
How do you lace ladder shoes?
0:272:58Ladder Lacing Tutorial – Professor Shoelace - YouTubeYouTubeStart of suggested clipEnd of suggested clipI've started straight across the bottom and out through both the bottom eyelets. Now at each side weMoreI've started straight across the bottom and out through both the bottom eyelets. Now at each side we take these shoelace and feed it up the side in through the next higher eyelet.
How to criss cross lace?
Then, instead of crossing each lace to the other side, thread the laces over and through the eyelets directly below them. Take the left lace and pull it through the loop you just created with the right lace.
How to lace shoes with a criss cross?
To lace your shoes using the criss-cross method, start by placing your shoe in front of you with the toe facing away from you. Thread your lace through the two eyelets closest to the toe of the shoe, and pull until the lace is an even length on both sides.
How to put a shoe in front of you?
Put a shoe in front of you with the toe facing away from you. Starting from the two frontmost opposite facing holes, insert each end of the shoelace from the inside. Make sure both sides of the remaining laces are equal. 2.
How to make a shoe with 5 pairs of lace?
Method for shoes with five-pairs of shoelace holes. Place one end of the shoelace through the first hole, inside step (i.e., the left hole nearest the heel on a right shoe) and pull through to leave about 6 inches (15.2 cm) of lace outside. Pass it under and up through the second outer hole.
How to make a shoe loop?
1. Lace your shoes using the criss-cross method, stopping before the last hole. 2. Take the lace on one side, and put it into the hole on the same side. Do the same for the other lace. 3. Insert the left lace through the loop you have now created on the right. 4.
How to feed lace back to the same length?
Pass it under and up through the first outside hole. If you end up with more lace on side than the other, fold the extra length of the longer lace in half, put the folded end together with the end of the shorter lace, reverse the procedure to feed lace back to bring both laces to the same length.
How to tie a lace hat?
Hold both ends of the lace straight. Place the right end over the left, then bring the left above the right and through the loop. Pull both ends tight. 2. Take hold of the right lace and form a loop, placing your finger in between to hold it. Bring the left lace over the right, and underneath it in a circular motion.
How to make a shoelace with a cross?
Take both ends of your shoelace and cross under the first horizontal line you created. Thread your laces down through eyelet 2, keeping them as flat to the shoe as possible.
How to make a starburst shoe?
Step 1: Left Shoe (Starburst) Start with your left shoe by threading the two ends of your shoelace down through eyelet 3 on both sides. Make sure to center your shoelace so that you have the same length to work with on both sides. Ask Question.
How to make a van shoelace?
Start with inserting shoelace in the first eyelets at the bottom with the shoe facing you. Then pull the ends of the laces to ensure they are even for this pattern to work. Run the left shoelace end straight up on the van inside and out through the next higher eyelet on the left side.
What is straight bar lace?
Straight bar lacing is one of the most popular street styles but pretty cool for vans. It is a very simple style that provides a very clean appearance. The pattern is also easy to tighten, making it perfect for skating and other skills. However, it works well for vans with an even number of eyelets. That’s because the lace must cross the shoe an even number of times.
What is cross lacing on skate shoes?
It is an easy pattern to make and will keep you vans tight for an intense sport making perfect for ska te shoes. The pattern is very simple, and all you need is to have the right length shoelaces.
What is loop lacing van?
The loop lacing vans is one of the versatile patterns. It is a very simple lacing method and yet will improve your appearance if done properly. Each of the van loops back on itself down the middle. However, you need to do it right to avoid loops shifting off the center.
