Put a new grip on the club if you've trimmed from the butt end. If you cut the tip, glue a new ferrule onto the shaft, abrade the tip a bit, then use epoxy to re-attach the clubhead. Lengthen a Club Extend your steel or composite shaft up to 2 inches by adding a piece onto the butt end of your club.
How do you shorten a golf club handle?
Look up the anatomy of the specific golf club you have to be sure. Once you remove 0.5” or whatever it is that you need to take off, you can sandblast it and apply a new grip to the shortened handle. This effectively does the same thing as removing the bottom portion of the shaft in most golf clubs.
Should you Lengthen Your golf clubs?
On the other hand, maybe you received a driver as a gift that's a bit too long, or you found an otherwise perfect wedge at a garage sale that doesn't quite fit. Depending on your plan for the club, you have several options for adjusting its length. Lengthening a club gives you a longer swing and, potentially, a faster swing speed.
How do you hold a golf club with your right hand?
Many golfers’ right hand sits so the palm is near the side of the grip, facing the target. The palm of your right hand should rest on top of the thumb of your left hand. The ‘v’ formed by your thumb and index finger should point to your right ear. How do you hold a golf club with your left hand?
How do you keep a club head from disconnecting from the shaft?
You would have to do it yourself. The point where your club head meets the shaft is called the crown. It’s a piece that compresses the two together as an extra defense against the club head disconnecting from the shaft. With this, there’s also usually a different way that the shaft and club head have been connected.
What if my golf clubs are too short?
What Happens When Golf Clubs Are Too Short? For most golfers, having clubs that are too short will be better than if they're too long, but can still result in inconsistent shots. Clubs that are too short will make you stand bent over, which can cause back pain. You'll also have the tendency to push the ball a lot.
How much does it cost to lengthen a golf club?
Lengthen Shaft ($5.99 Steel or $6.99 Graphite per club*): Most irons, putters, and woods can have length added to the existing shaft. *Save grip Fee may apply.
Can standard golf clubs be lengthened?
Golf clubs are often sold in a “standard” length, which is relative to each club. However, golfers differ in height and arm length, so sometimes the length of a club must be adjusted. Not only can golf clubs be lengthened for people who need it, but they can also be shortened.
How do you install a golf shaft extender?
0:562:35How To Install Graphite Shaft Extenders - YouTubeYouTubeStart of suggested clipEnd of suggested clipInto the butt end make sure it's nice and snug. And then we're ready to do our next assembly stageMoreInto the butt end make sure it's nice and snug. And then we're ready to do our next assembly stage which is to epoxy it into the shaft. Just want a good even coating.
How long should golf clubs be for my height?
Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").
Can you add an inch to irons?
Most players consider using longer shafts in their clubs at some time or another, believing that longer shafts equal more distance, although that isn't necessarily true. There are two ways to lengthen your shafts. You may add extenders to your existing shafts or you may replace your existing shafts with longer ones.
Can you adjust golf club length?
You can buy extension pieces or cut one yourself from an old shaft, using the same cutting techniques that you did for trimming a shaft from the butt end. Use sandpaper to lightly abrade the edge of the extension piece that will attach to the new shaft, then apply epoxy glue to fasten the piece to the shaft.
Does lengthening a golf club change the lie angle?
The lie angle will automatically change if clubs are lengthened. Only slightly but it will change. There is no such thing as standard lie as all the manufacturers generally are different. The lie angle that is correct for you can only be tested dynamically - i.e. via a pro or fitter on a lie board hitting golf balls.
Do longer clubs go further?
Golfers are always seeking more distance to their shots, and an easy way to get more distance is to increase clubhead speed. A longer club puts the clubhead on a bigger arc for more speed, so some players will lengthen the shafts on their clubs to gain distance.
How can I extend my shaft?
1:1414:42Golf Club Repair - How To Extend a Golf Shaft - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe are going to talk about the graphite first then the steel rule of thumb in the McGowan. LikeMoreWe are going to talk about the graphite first then the steel rule of thumb in the McGowan. Like material for like extension meaning that you have a like that's a graphite extender.
Should I add length to my irons?
Sometimes a golfer's height and arm length will negate each other and a standard length is the best option. As length is increased, so is the weight. Increasing the length also changes shaft flex. For every 1" added, the shaft becomes one flex softer; likewise, a shorter shaft plays stiffer.
Can you add an extension to graphite shaft?
Always use either nylon or plastic extensions to extend a graphite shaft. Using a steel shaft extender will create a shear point where the extension is made, causing almost certain shaft failure. 3. Always epoxy the extension in place, do not rely on a pressure fit.
How does a lengthened golf club work?
A longer distance can be achieved with a lengthened club if you have the ability to swing it with the same force and speed that you did with a shorter club . This increases the ball’s velocity upon impact, and you can hit it farther. Flex: The flex of the shaft will be altered. This happens for a few reasons.
Why do you need to lengthen a golf ball?
The length is to compensate for the lighter head. You can’t lightly tap the ball in if the head is heavy and the shaft is short.
When do You Need Custom Golf Clubs?
When you can’t seem to find a 9 iron or a putter that’s designed for your height. Using the information that we provided above, you can determine your
Why use irons on flat ground?
Irons are used on flat ground and are supposed to give you a way to get the ball closer. If the club shaft was longer, you’d hit the bottom hemisphere of the ball on your downward swing and send it flying through the air. That’s not what we want.
What is distance in golf?
Distance: Quite simply, the maximum distance that you can drive the ball. Since clubs are designed within half an inch of each other, the adjustments are small, but the overall force changes dramatically. This is relevant to your arm length and size when swinging. A longer distance can be achieved with a lengthened club if you have the ability to swing it with the same force and speed that you did with a shorter club. This increases the ball’s velocity upon impact, and you can hit it farther.
What happens if your woods aren't longer?
If your woods didn’t have the length that they do, and they were shorter, you’d be sending your ball almost straight up and they wouldn’t close much of a distance. It’s not always about the angling of the golf club head; sometimes it’s about the length and force to make it meet the ball.
What happens if you use too long golf clubs?
If you’re using clubs that are too long for you, you’re going to have a rough time closing the gap between your tee and the hole. If it’s too short, you’re going to hit it too fast without proper form.
Why do golf clubs change length?
Changing your golf club's length also changes the club's playing characteristics -- which is the reason golfers decide to shorten or lengthen a club. On the other hand, maybe you received a driver as a gift that's a bit too long, or you found an otherwise perfect wedge at a garage sale that doesn't quite fit.
How to remove a clubhead?
Use a shaft extracting machine to remove the clubhead. Heat the hosel to melt the glue before pulling off the clubhead. Trim a graphite or steel shaft using a hacksaw, cutoff wheel or chop saw. You can also use a tubing cutter on a steel shaft. Put a new grip on the club if you've trimmed from the butt end.
How to remove grip from butt?
Remove the grip with a blade if you're cutting from the butt end. Use a hooked blade on a graphite club to avoid damaging the shaft. To trim from the tip, heat the ferrule with a heat gun to loosen the glue, then cut the ferrule off the shaft. Use a shaft extracting machine to remove the clubhead. Heat the hosel to melt ...
Does lengthening a golf club make it faster?
Lengthening Effects. Lengthening a club gives you a longer swing and, potentially, a faster swing speed. The increased speed will translate into more distance if you hit the ball squarely. But the added weight may cost you some control and make it more difficult to hit the club's sweet spot. Longer shafts also become more flexible.
Does trimming the butt end of a golf club make the shaft stiffer?
If you trim the club from its butt end you'll also increase the shaft's flexibility, because the narrower, more flexible portion now makes up a greater percentage of the shaft's overall length. By the same logic, trimming the tip makes a shaft stiffer, but the club's most flexible area is reduced.
Series Navigation
Extending a golf shaft is a useful technique to have if you are buying used clubs, or if you are experimenting with different club lengths. If you know how to cut a golf shaft or how to extend it, you don’t ever have to worry about purchasing the correct length of clubs on Ebay or other used club marketplaces.
Materials Needed
Extension (You could also use an old golf shaft) Make sure you purchase the right size extension. You need to know the “butt diameter” of the shaft that you are extending, and purchase the extension that matches. Here is a database of shafts.
About the Author: Zach Gollwitzer
Hey!! I'm Zach, the founder of The DIY Golfer. I created this site in 2015 while playing D1 collegiate golf to help myself understand the game of golf better and improve as a player. Fast forward a few years, and it has become much more than a journal.
How to grip a golf club with your left hand?
Close your hand around the club.As you grip the club with your left hand, the heel of your palm should rest along the top edge of the handle (but you should still be able to see the tip of the handle). Rotate your hand to the right until you see two knuckles on your left hand when you look down.
Where should the grip of a golf club be?
The grip of the golf club should sit diagonally across your fingers into the palm of your left hand. When you close your left hand, you should be able to see the knuckles of your left index and middle fingers.
Why do golfers interlock their fingers?
Many of golfers choose to interlock their fingers because they feel it helps them work together as one, which increases their power.
How to make a straight line on golf club?
Hold your club waist-high in front of you, horizontal to the ground, and square the club face. Always grab the club with your left hand first. Stretch out the fingers of your left hand; align the club handle with your left palm so it makes a straight line diagonally across your fingers.
What is the best grip for golf?
The overlapping or “vardon” grip is one of the most common in golf. This is when you positioning the pinkie finger of one hand and placing it in the ridge between your other hand’s index and middle finger. This grip’s biggest advantage is beneficial for anyone with particularly large hands.
Why do you put your fingers together in golf?
The biggest advantage is that this ‘locks’ your fingers together so both of your hands work together, which can give your golf swing some added power.
How to get a neutral grip on golf?
Rotate your hand to the right until you see two knuckles on your left hand when you look down. This will give you a neutral grip, which is a great starting point for lots of golfers.
How to cut a golf club length?
1. Measure the desired new length of club. With the measuring tape, measure the desired length to be cut off. This distance should be taken from the top of the club. Mark the length. Use a permanent marker to mark where the cut should be made.
How long does it take to shorten a golf club?
Believe it or not, you can adjust them yourself, without going to a professional. These relatively easy steps will help you shorten a golf club in 45 minutes or less! Steps.
How to lubricate a golf grip?
Hold your finger to the tee-sized hole at the end of grip and spray the solvent into the other end. Shake this around to lubricate the inside of the grip. Put the grip onto the end of shaft. With your finger still holding all the solvent liquid inside the grip, slide the big hole onto the shaft.
How to install grip tape on a golf cart?
1. Apply grip tape to the end of the shaft. Put the new grip along the shaft to see how far down it will extend. This is how far you want the tape to go on each side.
How to get sticky glue off of a golf grip?
Spray with solvent. This will lubricate the tape so you can easily slide the grip over it. This solvent will dry up and become a sticky glue. Spray solvent into the grip. Hold your finger to the tee-sized hole at the end of grip and spray the solvent into the other end.
How to dispose of a golf club grip?
Prepare the work area. Place a towel or clothes underneath your vice grip. Place the club into the vice. Put the club into the vice such that the grip end of the club is pointing at you. Cut off the grip. With a utility knife, carefully make a cut along the grip. Remove the grip and dispose of it in the garbage.
How to smooth out a metal shaft?
Sand/dull the end of metal that was just cut. Take the sand paper and carefully smooth the end of the shaft. It will be sharp, and you do not want to rip the new grip that you will put on later.
How does lengthening a shaft affect swing?
Timing and Feel. In many ways, the biggest effect of lengthening a club shaft is how it affects your ability to swing the club. The combined changes in length and swing weight make the club feel different. In turn, these changes will affect your timing and even your mechanics, perhaps without you even realizing it.
What does swing weight mean?
Swing Weight. Swing weight isn't an actual weight so much as a comparison of the difference in weight between the club head and the butt end of the shaft. It's expressed as a letter-number combination, such as C9 or D2. Lengthening the shaft increases the swing weight, which makes the club head feel heavier. It may even make the club too heavy ...
Can you use extenders to lengthen a golf club?
However, using extenders to lengthen a club will change the flex of the club, sometimes by an unpredictable amount. Not only does the shaft become more flexible than before, thus further affecting accuracy, but it lowers the kick (or bend) ...
Does lengthening the shaft make the club head heavier?
Lengthening the shaft increases the swing weight, which makes the club head feel heavier. It may even make the club too heavy for you, which will slow down your swing speed and actually reduce your distance.
Does lengthening a golf club shaft affect accuracy?
Accuracy. As a general rule, lengthening any club's shaft will reduce your accuracy with that club. The longer the club, the more difficult it becomes to hit the ball solidly. This is especially true when the ball is on the ground rather than on a tee, since hitting the ball fat is more likely.
Is shaft length a factor?
Shaft length is certainly a factor in how far you hit a given club. However, some clubs benefit more than others. Installing longer shafts in wedges and short irons will almost always result in more distance, as most players have little trouble swinging the shorter clubs.
Do golf clubs have longer shafts?
Effects of Lengthening a Golf Club Shaft. Tall players like Bubba Watson have to use longer shafts in all of their clubs. Most players consider using longer shafts in their clubs at some time or another, believing that longer shafts equal more distance, although that isn't necessarily true. There are two ways to lengthen your shafts.
How Do You Measure The Length Of A Golf Club?
They measure it from the heel of the club to the butt end of the handle or the grip.
How does a half inch length change affect a golf swing?
Every half-inch length change alters the lie by a degree. There will be an alteration in the way you grip the club, change in your positioning or posture while taking a swing, you may need to bend it a little to drop your hands a bit, or you may stand more upright to make up for the change in distance. Since there will be changes in the length of ...
What does it mean when a golf club is too upright?
A club that is too upright every time you swing means that the heel of the clubhead is lower than that of the toe. The tendency here is for the ball to hook, especially for those who are right-handed golfer where the curving of the shot, often takes place. An upright lie angle is more common because the golfers who are just beginning in ...
Why does my golf club slice?
There is a risk of slicing the ball when your angle is too flat. This means that the angle between the shaft and the ground is smaller. Once your club is too flat for your swing, the toe of your golf club will have a lower range than the heel when it should be leveled. Slicing happens because of such reasons.
How to increase swing weight?
Swingweight can easily be increased by using lead tape placed at the clubhead. Lengthening a club softens the shaft a fraction while increasing the swing weight of the club. Each time you add length like half an inch will also add three swing weight points.
How to tell if a golf club is a perfect sole?
This is the easiest way to see the orientation of your golf clubs at impact. If there is a mark of a divot in a rectangular shape , then this is a club with a perfect sole. When you see a deeper pattern from the toe or heel, this means there should be some change done for your golf club.
What is the best way to get accurate golf clubs?
Club fitting is the best way to get accurate golf clubs, cause there is no standard lie angle that you can find in any golf store, and you need the fitting, so it will be according to your build, swing type, and preference.
