how to make a golf green at home

1. Choose a green location. Ideally, you should choose an open area in the backyard with a lot of sunlight for your green. ...
2. Test your soil. The next step on how to make your own golf green is to evaluate the condition of the soil. ...
3. Access the surface drainage. The contours of the green should allow easy and quick water drainage. That’s why it is better to avoid low areas that collect water.
4. Construct the green. Tear up original sod in which you make the green, then rake rocks and debris to create optimum seeding conditions, aeration, and drainage.
5. Plant and maintain the grass. Mix some grass seeds with sand, then sow them evenly around your green. ...
6. Complete with accessories. By now, you might understand how to make your own golf green. But to complete it, consider adding some necessary accessories.

Full Answer

What makes a golf course 'green'?

Apr 18, 2011 · Steps Download Article 1. Choose a location. Your green should be built on a spot that has sandy soil, plenty of sun and good drainage. 2. Excavate the area of your golf green to a depth of 20 inches (51 cm). Be sure to remove all the existing sod so you... 3. Design the green. It should have a ...

How to build a backyard golf green?

Jun 08, 2019 · How To Make Your Own Golf Green – Easy Instructions 1. Choose a green location. Ideally, you should choose an open area in the backyard with a lot of sunlight for your... 2. Test your soil. The next step on how to make your own golf green is to evaluate the condition of the soil. While most... 3. ...

How to build the perfect home putting green?

Jun 23, 2019 · Every golfer dreams of having their own home putting green in their backyard. This video provides you an in depth overview of the process involved and how to...

How to build a putting green in 2 days?

Apr 27, 2020 · Installing a home putting green Doc shows you how to. MORE INFO → https://www.howtowithdoc.com/home-putting-green/Doc installs a …

How do I make a real golf green in my backyard?

0:041:39USGA Putting Green Construction Recommendations - YouTubeYouTubeStart of suggested clipEnd of suggested clipDesign in the case of a renovation project wooden grade stakes are often driven into the puttingMoreDesign in the case of a renovation project wooden grade stakes are often driven into the putting green at regular intervals. So the original shape and contours of the putting surface can be recorded.

How much does it cost to put a putting green in your backyard?

between $11 and $25 per square footExpect to pay between $11 and $25 per square foot to have a backyard putting green installed. This pricing could change based on size. The larger your golf green, the less you'll pay per square foot; most contractors lower their rates for bigger projects.

What is a good size for a backyard putting green?

Backyard golf greens for residential spaces are usually around 500 square feet, while artificial golf greens for commercial projects or Nicklaus Design golf courses are usually 1,500 square feet. Our outdoor synthetic putting greens are tailored for each client, considering available space as well as budget.

Does a putting green add value to a home?

Having your own backyard putting green will help you fine tune your golf game. There are other benefits to think of as well. Not only will it add value to your property, it can enhance the area's overall look.Sep 29, 2016

Select a Site

No surprise here. If you want a putting green, you’ll need a place to put it. It doesn’t have to be an enormous plot of land — around 1,000 square feet is a manageable size that will still give you plenty of room to roll your rock — but it should be in a place that gets a reasonable amount of sunlight and doesn’t feature any severely steep slopes.

Start Digging

You don’t need to go extremely deep. Around 10 inches will do. You’re basically gouging out what amounts to a shallow bathtub (a cake pan is another way to picture it) that covers the entire footprint of your green. You’ll be filling it in with sand (and a few others things) before you cover it with grass.

Add Some Contour

You’re not trying to replicate the greens at Augusta. But you do want your putting surface to have a little lilt. If the ground doesn’t have any natural contours, you’ll need to add them, and now’s the time.

Install Proper Drainage

Without it, you’ll wind up with a soft and spongy green, prone to disease and no fun to putt on. Four-inch perforated drainage pipe is the industry standard.

Cap it with Sand

And not just any sand. Golf course sand. Sand that drains. Sand that meets United States Golf Association specifications. Any self-respecting home improvement store should be able to provide you with it.

Seed it or Sod It

You could go either way. Sodding is easier in the short run. But in the long term, Werline says, seeding will likely give you better quality turf. What grass varietal you plant will depend largely on where you live; different strains do better in different climates. Consult with a lawn care expert when making a selection.

The Final Touches

Now that you’ve got a green, you’ll want to cut some cups. Buy a hole-puncher (they’re available new and used online, though Werline says it’s worth asking your local golf course to see if they’ll sell you an old one; on golf courses, the standard cup depth is seven inches, but putting greens often have shallower cups).

Choose a Location and Design

There are many options for designing and making a DIY backyard putting green with synthetic turf. Do some research to choose the best installation process and putting green design for your yard. Once it’s installed, follow the manufacturer’s instructions on how to use and maintain the synthetic turf.

Outline the Green and Remove Sod

Once you’ve finalized your design, use spray paint to outline it in your yard.

Dig and Prevent Weeds

Excavate the area inside the outline. As a rule of thumb, go four to five inches deep for a crushed rock base. Spray a ground-clearing, long-term weed killer and put down a layer of landscape fabric over the bare dirt to ensure weeds and grass won’t grow back.

Put the Cups in Place

Another crucial step in installing a backyard putting green is deciding where the cups will go. The cups have holes in them, but if desired, dig small trenches leading from the cups, past the green, so rainwater can drain out. Put gravel in the trenches. Mark the locations for the cups so you can find them later.

Make the Base for Your DIY Putting Green

To make the base for the putting green, put crushed stone, such as 1/4-inch to 3/8-inch unwashed, crushed limestone, into the excavated area. Spread the crushed rocks out evenly with a rake or shovel.

Pre-Shrink if Needed and Join Sections

Most synthetic turf is already sized, but if your manufacturer recommends it, unroll the turf and pre-shrink it by spraying it with a garden hose until it’s saturated. Let it dry for at least 24 hours.

Install and Cut the Synthetic Turf

Next, put the synthetic turf, or artificial grass, over the crushed stones and carefully cut out the shape and size of your design with a sharp utility knife.