- First, thread the cord through the lobster clip and make a larger loop over the top of it. ...
- Tie it off with a knot at the bottom of the clip.
- Thread your first bead. Do it once, and then double back over the bead and thread it through again, looping over the bead. ...
- Thread your other beads the same way. Add 5-10 beads. This number depends on how good you are at golf!
- Leave plenty of room for bead movement and test it to make sure they move along the thread and stay where they are. ...
- When you get to the bottom, put a round bead on and loop over it a few times.
- Tie the thread around the top of the bead to secure it.
- Add a dot of glue to make sure it won't slip.
- You're ready to go!
Full Answer
How do you make a golf stroke counter with beads?
Beaded golf stroke counters also make great row counters for knitters and crocheters. Cut your twine or string and loop it onto your key chain using a slip knot. You should have two lengths of string hanging down from your key chain now, approximately one foot long. String your beads onto your twine.
How do you put beads on a golf club?
Thread your first bead. Do it once, and then double back over the bead and thread it through again, looping over the bead. This makes it stay in place but also able to move up and down. Thread your other beads the same way. Add 5-10 beads. This number depends on how good you are at golf!
What are the best golf beads for beginners?
Wood: You can buy wooden beads that are natural or colored. Plastic: Even colored plastic beads would work. This would be great for a child or young person learning golf. You could use fun and bright colors! Acrylic: You can buy beads that have numbers or letters on them, which would be good for young players.
How do you make a golf stroke bead counter?
1:163:38How to Make a Row Counter - YouTubeYouTubeStart of suggested clipEnd of suggested clipYourself a nice boring sturdy square knot leave yourself to nice long ends. Then you use those endsMoreYourself a nice boring sturdy square knot leave yourself to nice long ends. Then you use those ends to string the beads.
How do you make a counter bracelet?
0:2211:27DIY Row counter bracelet. - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the materials that you're gonna need to make these bracelets rub counters are nylon support beatsMoreSo the materials that you're gonna need to make these bracelets rub counters are nylon support beats that can be plastic or glass beads. Whatever you want a lighter scissors.
How does a golf stroke counter work?
0:080:45A99 Golf SC01 Beads Stroke Shot Score Counter Keeper - YouTubeYouTubeStart of suggested clipEnd of suggested clipA nine-line gulf speed stroke counter portable easy to use and gets the job done all you have to doMoreA nine-line gulf speed stroke counter portable easy to use and gets the job done all you have to do is start from the top and pull a beat after every shot to keep track of your score.
How do you make a row counter?
2:037:39How to make a Row counter - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo cut yourself a nice good length because it is gonna go through each bead and I'm just going toMoreSo cut yourself a nice good length because it is gonna go through each bead and I'm just going to fish. This half this is the halfway mark. Through my thing and then pull through.
How do you use a counter stitch bracelet?
0:352:21Using the Row Counter Bracelet - YouTubeYouTubeStart of suggested clipEnd of suggested clipOn either side to tighten it back up again once it's on your wrist. So in the way these. Work youMoreOn either side to tighten it back up again once it's on your wrist. So in the way these. Work you can count by sliding these beads to count your rows. And you can see that the little knots.
How do you make a paracord bead counter?
0:001:00DIY Pace Count Beads - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo create your own set you'll need a 26 inch length of paracord. And 13 beads trim the ends of theMoreTo create your own set you'll need a 26 inch length of paracord. And 13 beads trim the ends of the paracord. And remove the inner strands fuse. The ends and tie them in an overhand knot.
How do I remember my golf strokes?
All you have to remember is to press the button after each stroke attempted and then reset to zero after completing the hole. It works very well for me. They are called "Talleys" - If you look on E-bay you could type that into the search box.
How do you put a stroke counter on a golf glove?
Stretch the Bead Counter over the flap of your glove, snuggle it up against the seam and when you take a stroke you slide a bead. There are 10 Beads on each counter, with plenty of room to move them. Unlike the other type with only 9 beads and strings.
Do PGA players keep their own score?
Typically, PGA TOUR events feature scorecards that have detachable paper slips on the bottom of the card where players will keep their own score during a round. At the top of the card, each player will keep the score of their opponents while also tracking their own score on the bottom, detachable half.
What is a knit tally?
1:212:57Knitting Row Counters Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt just has a clicker on the top and a little space for a there's a little hole here so that you canMoreIt just has a clicker on the top and a little space for a there's a little hole here so that you can thread it with some ribbon or some yarn.
How do you knit a chain counter?
0:133:10How to Use your Knitting Row Counter - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou just move it to the next number in the chain to designate that you have completed that round orMoreYou just move it to the next number in the chain to designate that you have completed that round or that row. And you keep going each number down the chain. Until you get to the ten.
How does a yarn counter work?
The concept is very simple: when you complete a row of knitting, you tick off one mark on your counter. This helps you reference the place in your pattern and it's just one more way to prevent mistakes. Counters are a very useful tool that almost every knitter decides they need at some point.
How do you calculate stroke with handicap?
Calculate the handicap for each pair as follows: (Lower handicap x 0.6) + (higher handicap x 0.4). If the handicaps in the pair are equal, then use half the combined handicaps. The lower handicap pair then give strokes to the other based on the full difference between the two handicaps.
How is matchplay scored?
Match play is a scoring system for golf in which a player, or team, earns a point for each hole in which they have bested their opponents; as opposed to stroke play, in which the total number of strokes is counted over one or more rounds of 18 holes.
How does the Stableford scoring system work?
Scoring Stableford The number of points awarded on each hole is determined based on comparison of the number of strokes taken to a fixed score, usually par. This fixed score is then adjusted in relation to the player's handicap.
Does Etsy offer free shipping?
Shipping policies vary, but many of our sellers offer free shipping when you purchase from them. Typically, orders of $35 USD or more (within the s...
How do I personalize items on Etsy?
Found something you love but want to make it even more uniquely you? Good news! Many sellers on Etsy offer personalized, made-to-order items. To pe...
Does shopping on Etsy help support small businesses?
Absolutely! Our global marketplace is a vibrant community of real people connecting over special goods. With powerful tools and services, along wit...
Are the products on Etsy handmade?
From handmade pieces to vintage treasures ready to be loved again, Etsy is the global marketplace for unique and creative goods. It’s also home to...
How to keep track of your golf score?
You can keep track of your golf score quickly and easily by making your own beaded golf stroke counter. With a simple technique and a few supplies, you can make a beaded golf stroke counter for yourself or to give away as a gift or a door prize at your next golf outing.
How to string beads on twine?
String your beads onto your twine. Take one length of twine and loop it through the bead from the right to left, and loop the other piece of twine from left to right. Continue to add beads in this manner, alternating the stringing direction with every bead (so string A enters right to left on bead one, then left to right on bead two, and so on).
How to use a bead golf counter?
How to Use a Bead Golf-Stroke Counter. Clip the counter to your belt, or bag. After every stroke you take, move one bead down. This way, you don't lose count of how many shots you have taken. They look nice, and it is easy to use. There are many different types on the market, so you can of course just buy one.
How many beads to add to a golf ball?
This makes it stay in place but also able to move up and down. Thread your other beads the same way. Add 5-10 beads. This number depends on how good you are at golf!
How to make a bead with a hole?
Remember, you have to double-thread the beads. Make sure the hole in your bead is large enough to thread through twice. Use a bit of clear glue to secure the knots. I found my beads a bit large, so maybe smaller beads would work better.
How to make a lobster bead?
Instructions. First, thread the cord through the lobster clip and make a larger loop over the top of it. This is so you can loop it and clip the counter to larger things. I doubled my thread to make it a bit stronger. Tie it off with a knot at the bottom of the clip. Thread your first bead.
Step 1
Cut two pieces of leather cord both approximately 7 inches in length. They need to fit the perimeter of your wrist, but 7 inches is a good average size. The clasps at the ends of the leather to secure the beads and hold the clasp will add length to the bracelet, and this should be considered when cutting the leather cord.
Step 2
Use jewelry pliers to fold the fold over clasps onto the ends of the leather capturing both cords in one clasp. Be sure to wait until the end to do the other end of the clasp so that you can place the beads onto the leather.
Step 3
String your beads so that the 9 small beads on one row and 10 big beads on the other row. You can always add an extra colored bead at 5 in both rows to provide a more detailed abacus. Hold in place.
Step 4
Add the counter bead or charm by looping around both cords. This is the marker so you know where to start your count from each time. It should move freely on the cord as should the other beads.
Step 5
Attach the other fold over clasp to the open ends of the leather, making sure to capture both row ends in the metal. Use your pliers to push down the side flaps and secure the beads in place.
Step 6
Place jump rings (small metal circles similar to key ring chains) onto the ends of the fold over clasps. There are small holes at the ends of the clasp for this purpose. This may be a little tricky for the amateur beader, but it can be done.
Step 7
Close the bracelet loop with the large bracelet clasp by attaching the metal loops at either end of the closed clasp to the jump rings. Open and close the clasp to ensure your completed counter bracelet works and start counting.
