how to make a mini golf hole at home

• Hole 1: Create a ramp with a book leaning against musical chimes or a toy xylophone. ...
• Hole 2: Use canned food or cereal boxes as obstacles and use your kitchen to create a fun food theme.
• Hole 3: Use a footrest as a tunnel for the ball to go through before it reaches the hole.
• Hole 4: Decorate holes with toys like toy soldiers and tanks for a war theme.
• Hole 5: Create a tunnel with an empty soda carton. Simply cut both sides with scissors to create a hole large enough for the the ball to pass through and ...
• Hole 6: Create a soft sloping ramp by covering a footstool with a yoga mat and placing a dish towel underneath to slow down the ball as it passes over ...
• Hole 7: Take a toy racetrack and create an incline onto a chair. ...
• Hole 8: Tie a piece of string onto a toy tambourine. ...
• Hole 9: Try to get as creative as you can for the final hole. ...

Full Answer

How to build a miniature golf hole?

• Paper
• Scissors
• Pencil
• Ruler
• Tape
• Large table or counter
• Small rubber bouncy ball
• Assorted sturdy, small-but-heavy household items, such as cans of food, a metal stapler, a roll of duct tape, and so on. ...
• Larger ball, such as a tennis ball (optional)
• Larger sturdy objects (optional)

How to make a DIY miniature golf course?

• The putt-putt Zoo is basically a jungle themed course. ...
• The driveway mini-golf course is great for accuracy as the difficulty increases as you place the holes further and further away. ...
• Playing throughout your house is the most creative and ambitious course to make as you have many resources at your disposal. ...

How do you make a mini golf course?

Method 1 Method 1 of 2: Creating a Course Using Household Items

1. Let your kids know what mini golf is. Mini golf is a game where players try to get a ball in a hole in the least number of shots.
2. Planning your course. Plan your course based on time and resources. ...
3. Design your course. ...
4. Choose your type of course. ...
5. Create your holes. ...
6. Get the gear. ...

More items...

How big is a mini golf hole?

While traditional golf is played with 18 holes, mini golf is played with nine but you can vary how many holes depending on the location. Statistically the average length of a miniature golf hole is 32 feet long, Pebble Beach has holes 75+ feet. The average width of a mini golf green is 12 feet, we have greens 26 feet across.

How do you make a DIY golf hole?

Here's how YOU can build an epic backyard golf hole — with stuff you already own!Pick the perfect cup size. ... Get a second cup that'll fit in the first cup. ... Pick out a flagstick. ... Cut a hole in the smaller cup. ... Dig your hole. ... Assemble your cup. ... Pick a flag. ... Play away!

How big should a mini golf hole be?

The average length of each hole is 30-45 feet and average width is 2.5-3 feet. The TYPICAL CHALLENGES offered in the game of golf as encountered in this course are as follows: 1. 2.

What material is used for mini golf courses?

Miniature golf is sometimes called “Abteilung 2” or “Europabana” and are the most common type of mini-golf courses, popular in holiday sites and cities around the world. This type of golf course is built using fiber cement and only requires space of about 600-800m².

How do you make a hole at home?

5:158:07How to Build the PERFECT Home Putting Green - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou know right-to-left putt here kind of the slope comes down here this is a nice flat part of theMoreYou know right-to-left putt here kind of the slope comes down here this is a nice flat part of the green to work on those 10 to 12 footers.

How deep is the cup of a golf hole?

Golf Hole (Golf Cups) have a regulated diameter of 4.25” (108 mm) and total depth between 4”-6” (101.6-152.4 mm). Golf Holes, or Golf cups, are the ultimate target for hitting the ball into in a game of golf.

How deep is a golf ball hole?

4 inchesThe Rules of Golf explicitly state that a hole must be 4.25 inches in diameter and at least 4 inches in depth. Maintaining clean hole edges is one of the reasons why holes are changed frequently, often each morning prior to the first tee time.

How do you make a putting green at home?

0:485:41Build Your Own DIY Putting Green | Gardening | Great Home IdeasYouTubeStart of suggested clipEnd of suggested clipBut before we put the turf down we need this build a strong footing and that starts with road bags.MoreBut before we put the turf down we need this build a strong footing and that starts with road bags. Get it level first and then you can add more road base to give it shape.

How do you make a mini golf out of cardboard?

DirectionsGather recycled boxes.Cut out large holes in the front and back of the box. ... Paint or use markers to decorate the boxes. ... Use the construction paper, markers, tape, and bamboo skewers to create golf flags. ... Then head outside to set up your golf course.

How can I make mini golf more fun?

Creative Ways to Enjoy Mini GolfHole 2: Introduce some competition by dividing your group into teams of two. ... Hole 6: Raise the challenge bar. ... Hole 7: Turn around, face backward and putt the ball through your legs.Hole 8: Try sideways soccer. ... Hole 9: Hold the club like a pool cue and guide it in.More items...•

How do I make a golf hole in my garden?

Let's take a look at how you can build your very own putting green.Real or artificial. ... Step 1: Choose a location. ... Step 2: Get the soil ready. ... Step 3: Add drainage. ... Step 4: Separate the green. ... Step 5: Place the hole. ... Step 6: Plant your seeds. ... Step 7: Fertilise, water, mow, repeat.More items...•

How do you dig a hole in a golf hole?

Keep in mind that the official size of a golf hole is 4.25 inches in diameter. Press the pipe lightly into the ground, making a mark where the pipe will be buried. Dig a hole in the spot. Measure the height of your pipe with your ruler and make the hole about one inch deeper than the result.

How do you cut holes in golf?

4:2415:57Basics of Cup Cutting - YouTubeYouTubeStart of suggested clipEnd of suggested clipInsert the cup cutter vertically into the putting surface to the full depth insert. The cup cutterMoreInsert the cup cutter vertically into the putting surface to the full depth insert. The cup cutter as smoothly as possible to avoid damaging the plug. And keep the cutter as straight as possible.

How big is a golf hole?

4.25 inchesOhio State University's Dr. Karl Danneberger explains why the golf hole 4.25 inches in diameter.

How wide is a golf hole in CM?

10.795 cmUnder the rules of golf, the diameter of a golf hole must be 4.25 inches (10.795 cm). This official hole size is agreed upon by golf's two major governing bodies, the USGA and the R&A.

What is the diameter of a golf ball?

1.680 inchesHence the majority of the manufacturers produce golf balls with the maximum allowed weight of 1.620 oz./ 45.93 g. Golf Ball Size: According to the USGA Rules of Golf, the diameter of the ball shall not be less than 1.680 inches (42.67 mm).

How long does it take to play Putt Putt?

It will take about 45 minutes to play an 18-hole putt putt golf course. There are a few factors that are going to impact this time.

No Golf Set? No Problem!

If you don’t have a toy golf set get creative. Unless you’re playing outside and the kids don’t have wild swings, you can use superballs, ping pong balls, or even a tennis ball. No putter? Try out a sword, stick or even your own hands. Just keep the size of the ball in mind when you are creating your obstacles.

Boxes

Use a cardboard box like Craftulate did here to create a simple three-hole obstacle for the kids. Make one hole harder by making angling the box, or try making the holes different sizes. You can also use empty cereal or tissue boxes. Try turning them on their side or even at an angle by taping them down with duct or packing tape.

Get Creative with Toys

Create an obstacle course more challenging than your local mini-golf with toys you have around the house.

Stop, Chalk & Roll

If you are playing outside, create difficulty levels for each area by drawing targets or boundaries with chalk. Use rocks to make roadways that kids have to hit through.

Scoring Tips

Unlike many other games, less is more with golf. The lower your score the better you’re actually doing. Basically, each stroke you take counts as a point. If you want to be true to the sport assign each hole in your obstacle course a number of difficulty beginning at Par 3 and moving up.

Fun golf terms to shout out!

Have you tried making a course at home? What are your ideas? Share them with us in a comment below.

What is MDF golf course?

Illustration by Carl Wiens. Rich, Tom, and their crew of young builders made this mini- golf course from medium-density fiberboard (MDF), a stable wood composite material. It's smooth and easy to work with, and it makes a great flat surface for rolling a golf ball.

How to cut MDF panel?

Using a drill/driver fitted with a 4-inch hole saw, start making a hole at this mark. Once the bit has poked through, flip the panel over and finish the cut from the other side. This will keep the MDF from splintering.

How to use cyanoacrylate glue on MDF?

If you are using two-part cyanoacrylate glue, spray it with activator. Quickly turn over the baluster onto the MDF, line it up, and hold it in place while the cyanoacrylate sets. This glue acts as a clamp while the wood glue dries into a strong bond. Step 4.

How to make a baluster with MDF?

Line up the balusters next to the edges of the MDF. Squeeze several strips of wood glue onto each baluster, one baluster at a time. Leave a few inches of space between the strips of wood glue. In the spaces, put down dabs of fast-setting cyanoacrylate glue.

Is mini golf a good game?

Who doesn't love besting Dad on the loop-de-loop hole? But it doesn't have to be just a vacation-week treat. Wouldn't it be great to have your very own course to play all year round —inside or out?

1. Pick the perfect cup size

I had no idea just how big actual golf holes were, when compared with various things in my kitchen. Salsa jar? Way too small. Skippy’s peanut butter? Still too small. A can of Planters Peanuts is close — four inches in diameter — but still too small. How do these guys miss so many putts with such a big target?!

3. Pick out a flagstick

Consider a few factors when selecting your flagstick. You want it tall enough that it feels legit, skinny enough that the ball will still fit in the hole and light enough that it will stay in place. I took the head off a mop and used the handle. Nice yellow color, too!

4. Cut a hole in the smaller cup

I chose an empty cashew container for my smaller cup, as described in No. 2. Then I traced a circle in the middle of that cup, exactly one mop-handle in diameter. Cut that out with some scissors, but be careful — don’t go too wide! Otherwise your flagstick won’t stay in place.

5. Dig your hole

Find a nice, relatively flat section in your yard (doesn’t have to be TOO flat, unless you keep your lawn stimping 12 ). Flip over your larger cup (from No. 1) and cut a hole around it using a butter knife.

6. Assemble your cup

First drop in the big cup (from No. 1) slightly below the surface of the ground — you don’t want any putts catching on that lip. Then put the small cup (No. 2) on top. Then insert the flagstick (No. 3) through the hole in the small cup. If you’ve sized it all correctly, it should stay in place!

7. Pick a flag

When it comes to choosing a flag, I’d go with something light and waterproof. You want that baby swaying in the breeze! I took one of those plastic bags newspapers come in (shoutout newspapers) and cut it in half. Nice color, perfectly waterproof and light as could be. Tape that to the mop handle and you’re officially in business!

8. Play away!

Get some fresh air, entertain the kids (read: yourself), take on a project and satisfy that golf itch — all without leaving home?! I can’t recommend this highly enough.

How to make a platform leg look better?

Platform legs and most thin wood: Glue quickly and patch things up after gluing, it will make things look better and will perform better. Hole: Use a plastic cup and delicately put hot glue on four sides and stick it on, it is extremely strong. More delicate pieces: Use technique with the hole.

What is the best way to cut wood?

Some tool to cut wood like a table saw, jigsaw, or even a drill for your hole . Sandpaper or a sidewalk edge to sand your wood and make it smoother, safer and will also enable you to adhere things better. Oil or Latex based paint for your wood painting.

Can you use hot glue to stick styrofoam to cardboard?

If you’re mixing materials, most of the adhesives will stay the same. Styrofoam will stick to wood with wood glue, but don’t use hot glue to stick to cardboard, as wood glue works fine all ways. Ask Question.