How to Make Redneck Golf: The Step-by-Step
- Break Down Lumber & Create Joinery. Begin your DIY redneck golf set by breaking down your lumber and cutting it to size. ...
- Drill Holes in the Golf Balls. Once your wood is cut down, you’ll want to drill holes in your golf balls. ...
- Cut Dowels and Vertical. While the gold balls were drying, I cut the dowels down to width. ...
- Sand & Glue Up. ...
- Finishing Touches. ...
How do you build a lawn golf?
How do you make ladder golf?Cut six of your 24″ pipes in half to make twelve 12″ pipes.Wrap six of the 24″ pipes in vinyl.Lay out the horizontal bars, then the t's and elbows.Add the vertical bars and attach all pieces together.Build base with six 24″ pipes. ... Attach the base to the top of the goal.
How do you set up a hillbilly golf club?
Directions to Make Hillbilly Golf:Step 1: Assemble the bases. You will need two of these to play the game.Step 2: To make the bolas, spray paint the golf balls. Once the paint dries, place each ball in a vice and drill holes through center of each golf ball. ... Step 4: Cut the clothesline so each piece is 36″ inches.
How do you make a Ladderball game?
0:207:59DIY Ladder Ball Game - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou need three colors for the ladder the top rung is going to be blue. The next one is going to beMoreYou need three colors for the ladder the top rung is going to be blue. The next one is going to be orange. And then the third one is going to be yellow. And then I need some colors.
How do you make a rope toss game?
2:054:02How To Make The ULTIMATE Outdoor Game - YouTubeYouTubeStart of suggested clipEnd of suggested clipWell not quite full ensured Edie I've said rope and we all know what hot glue feels like on theMoreWell not quite full ensured Edie I've said rope and we all know what hot glue feels like on the fingers completed bola we need five more like. This. Time to have some.
How far apart is Hillbilly golf?
15 feet awayThe official toss line is 15 feet away but most players measure 5 paces from the game ladder to set the toss line. This allows for a closer toss line for children's games.
What is cowboy golf?
Ladder toss (also known as ladder ball, monkey ball, ladder golf, ball rope, goofy balls, testicle toss, cowboy golf, and hillbilly golf and other names) is a lawn game played by throwing bolas (two balls connected by a string) onto a ladder.
How do you make bolo balls?
To make ball/rope projectiles, called bolas, drill a 3/8” hole in the golf balls. A clamp can firmly hold your ball while being drilled. Cut the nylon rope into six 20” sections. Tie a knot on one end of the rope sections and melt the end with a lighter to keep the rope from fraying.
How do you make a ladder ball out of PVC pipe?
1:472:54How to Build a Ladder Golf Game out of PVC Pipe - YouTubeYouTubeStart of suggested clipEnd of suggested clipAfter all the balls were drilled. And then took the 3/16 rope. And twisted it through the golf ballsMoreAfter all the balls were drilled. And then took the 3/16 rope. And twisted it through the golf balls tied a knot on each side keeping about 18 inches of string between each golf ball.
How do you make a 2x4 ladder?
0:231:49How to Make a 2x4 Blanket Ladder - YouTubeYouTubeStart of suggested clipEnd of suggested clipStart by cutting your wood you'll need to six foot lengths of 2x4. And for 18 inch pieces to make upMoreStart by cutting your wood you'll need to six foot lengths of 2x4. And for 18 inch pieces to make up the rungs lay. Them on a large flat surface.
How do you make a ball toss?
4:147:22Duct Tape Crafts - DIY Ball Toss Carnival Game Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipBack just cut little triangles that you can fold it back it doesn't really matter how messy it looksMoreBack just cut little triangles that you can fold it back it doesn't really matter how messy it looks because it's going to be at the back and no one's going to be able to see. It.
How do you make a ladder?
2:3421:14How to Make a Ladder | Easy Ladder Build - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo i started with some six quarter pieces that would make up my two. Outside things i really shouldMoreSo i started with some six quarter pieces that would make up my two. Outside things i really should have looked up ladder terminology before i did this voiceover.
How do you play the ladder toss game?
0:263:01How To Play Ladder Ball - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe game has two ladders. And six bolas. Three bolas for each. Team. The ladders are set up acrossMoreThe game has two ladders. And six bolas. Three bolas for each. Team. The ladders are set up across from each other 15 feet apart. This distance can be changed based on player.
Break Down Lumber & Create Joinery
Begin your DIY redneck golf set by breaking down your lumber and cutting it to size. I decided to use lap joints for this build, which I did by creating several small cuts on a table saw and knocking away the thin slices with a hammer. I cut the riser blocks, countersinking and attaching the parts with glue and screws.
Drill Holes in the Golf Balls
Once your wood is cut down, you’ll want to drill holes in your golf balls. I did this by creating a quick wooden jig that I would clamp together with a golf ball inside. I cut the holes with a quarter-inch drill bit on the drill press. Once cut, I spraypainted the golf balls and let them dry.
Cut Dowels and Vertical
While the gold balls were drying, I cut the dowels down to width. I used a Forstner bit to create holes in each of the verticals for the dowels. Additionally, a tapered the verticals by countersinking mounting holes for the base for a solid, easy build-up.
Sand & Glue Up
Next, I routed the edges so they were nice and rounded for a really professional finish. I sanded everything to 120 grit before gluing and using screws to mount the feet to the verticals. I think added glue to each dowel and clamped it together to dry.
Finishing Touches
Before wrapping up, add a finish to the wood. While that dries, you can add the strings to the golf balls, ensuring 13 inches of string between each ball. Once that’s done, you’re ready to play!
Step 1: Parts and supply list
You will need: 6 3/4 PVC T’s 6 3/4 PVC Elbows About two 10 foot 3/4 PVC pipe Nylon rope 6 golf balls Scissors Drill Saw (You need to double everything besides the tools)
Step 3: The base
Get one 2ft pipe and atatch it to two of the elbows Then atatch two more 2ft pipe to the elbows Repeat this Atatch the two T’s to the pipes
Step 4: How to make the throwing balls
Ok now cut the nylon rope to about 20in Now drill the hole in the golf balls Burn the ends so they dont frey Then just stick em’ through and knot them Make 6 of them
Step 5: Rules and overview
Ok first I only told you how to make one of the ladders. You must make another unless you are the only one that wants to play. Just repeat this Instructable and make another one. If you want to you can glue it, but I want to be able to travel with it.
