Golf-FAQ.com

how to make your own frisbee golf basket

by Johathan Okuneva Sr. Published 2 years ago Updated 2 years ago
image

  1. Cut out the Basket. Use a circular saw to cut off the bottom of the steel barrel, keeping in mind that it should be around 7-8” deep.
  2. Start the Drilling. Make sure your plywood fits comfortably on the inside of the trash can lid. ...
  3. Attach the Basket to the Ground. Stick a rubber PVC coupling down four inches from the base of the basket, and make sure the PVC reaches at least ...
  4. Attach the Chains. Cut the chains into 12 pieces, each 26” in length, and set these for the outside. ...
  5. Secure It to the Ground. You can use an umbrella base or cement to secure the PVC to the ground. ...

Part of a video titled How to Make a Disc Golf Basket | I Like To Make Stuff - YouTube
0:16
13:57
This is actually from the fencing. Section and this is a post for a chain-link fence. And then toMoreThis is actually from the fencing. Section and this is a post for a chain-link fence. And then to wrap the whole thing together we've got some other things out of that same section of the store.

Full Answer

How to make a DIY Frisbee disc golf basket?

To make an easy diy disc golf basket, stick your tomato cage in the ground for setting up. Place your Dollar Tree laundry basket inside the center of the tomato Cage. That’s all there is too making a diy disc golf basket. Here is what a completed one should look like. Here are my 5 completed diy frisbee golf baskets.

What do you need to make a frisbee golf course?

With some tomato cages and dollar store laundry baskets you can easily make a fun homemade Frisbee golf course for your backyard. For DIY Frisbee Golf You’ll Need: I made 5 DIY Frisbee Golf Baskets or DIY Disc Golf Baskets. The tomato cages I got at Walmart for $2 each and the Dollar Tree baskets were $1 each.

What is the difference between disc golf basket and standard basket?

Also, a basic disc golf basket will have less the 18 chains installed. For the standard disc golf basket, the measurement and dimension are are the same as a basic one but contains more than 18 chains. This disc golf basket also uses durable materials in its foundation.

How many chains are in a disc golf basket?

Also, a basic disc golf basket will have less the 18 chains installed. For the standard disc golf basket, the measurement and dimension are are the same as a basic one but contains more than 18 chains.

image

What can I use for a disc golf basket?

0:429:53Easy DIY Disc Golf Basket - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can also use like an umbrella base to do it but these are really sturdy. And i would maybe lookMoreYou can also use like an umbrella base to do it but these are really sturdy. And i would maybe look around try to find one if you can they don't have to be this big they could be a little bit smaller.

How much chain do I need for a disc golf basket?

Chains and Disc Golf Baskets The minimum chain length, dictated by the PDGA, is 9 inches. And the minimum number of chains around the basket is 12. This is not to say you will not see homemade versions with chains as long as 24 inches, but in PDGA sanctioned events, the measurements will meet their specifications.

How do you make a homemade golf cart disc?

1:4619:34DIY Disc Golf Cart - Build Special - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's just you fold it down it clicks into place it's got two smallish wheels on the outside. And youMoreIt's just you fold it down it clicks into place it's got two smallish wheels on the outside. And you can expand it up like that clicks into place you can pop your bag on there.

How do you make a wooden disc golf basket?

6:4217:12$27 Disc Golf Basket - All Materials Purchased - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll right so I've drilled my 24 holes. And I've also cut my pieces here for stabilizers this one'sMoreAll right so I've drilled my 24 holes. And I've also cut my pieces here for stabilizers this one's 21 inches and then I've cut two that are 12 inches. Each I've rounded off the corners.

What is the diameter of a disc golf basket?

A Disc Golf basket, required on a standard target, is 66cm in diameter (26 inches), the rim of the basket is 82cm (2 ft 8 inches) and the basket must be 18cm (7 inches) deep.

How do you build a push cart in golf?

2:354:42DIY - Baby Jogger conversion into a Golf Push Cart - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo it's basically took off all the previous seat from the stroller jogger. And basically made justMoreSo it's basically took off all the previous seat from the stroller jogger. And basically made just into a naked Stoller. And I disconnected this basket and attached it back here.

How do you make a ZUCA disc golf cart?

3:538:53ZUCA Compact Disc Golf Cart Unboxing and Assembly - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is to get these little two divots on this inside of the wheel facing inwards. So you make thisMoreThis is to get these little two divots on this inside of the wheel facing inwards. So you make this wheel the outermost item. And then you get this spacer and you bring this in here.

How much does it cost to make a disc golf basket?

A friend and I built some baskets. The total cost was about $20. We built 6 and set up a course on his property. Unless you are looking for perfection in a basket building something cheap can be done if you use your noodle.

How do I practice disc golf in my backyard?

1:1116:35Disc Golf Putting Game - Backyard Quarantine Challenge - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere are 18 different stations yep and you each get three putters. You put on a station until youMoreThere are 18 different stations yep and you each get three putters. You put on a station until you make it and it's the next person's turn when you run out of discs.

How do you make a mini disc golf basket?

3:158:15Mini Disc Golf Basket for $20 - Permanent Basket - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll you need to do is take appliers. And open up each piece of chain no need to cut and get sixteenMoreAll you need to do is take appliers. And open up each piece of chain no need to cut and get sixteen that are all the exact same length. So I've taken my wood scraps.

How to make a disc golf basket?

Step 1: Using a circular saw with a metal blade, cut the top and bottom off the steel barrels at about eight inches deep. Once you have cut them, you can smooth the edges using a metal file. Step 2: The top of your disc golf basket (either a trash can lid or a portion of the steel barrel) can be reinforced with plywood.

How many holes can you make disc golf baskets?

But if you do have a big piece of property and a successful first attempt at a DIY basket, you can keep building even more disc golf baskets for a 9 or even 18-hole course right in your own yard. Try to space out the holes as evenly as possible in your yard.

How deep should a disc golf basket be?

Your fence post should be 66-inches tall and a disc golf basket is about 55-inches tall. That means you need to dig a hole 11-inches deep. A post hole digger works best for this. Dig the hole a few inches deeper to add some gravel for drainage.

How high should a fence post be for a basket?

Figure out how your finished basket will be mounted (see last step). If it will be in a patio umbrella stand, then cut the fence post to a height of 57-inches using your hack saw. If you will be mounting your basket in the ground, then leave the pole alone.

How to make a PVC sleeve?

It should be real close to 12 inches. Make a mark every inch or so, about 3/4-inch down from the open end. Drill a 7/32-inch hole at each of these marks. Insert a 3/16-inch x 1-1/2-inch eyehook in each hole and secure with a nut on the inside of the PVC coupler. Tighten each one down pretty well, but be careful not to crack the PVC. Once all the eyehooks are secured, use the bolt cutters to cut off some of the extra threaded part of the eyehook inside the PVC coupler.

How to make a whiskey barrel liner?

Hang chains on each of the S-hooks on the grill grate. Crimp the S-hook closed around the chain. Open one of the 3-1/4-inch hinged locking rings, place it around the fence post inside the whiskey barrel liner and begin threading the chains on the ring. When all the chains are in place, close the ring. Now attach S-hooks to each of the eye-hooks on the PVC piece; crimp the S-hooks closed. Hang chain on each of the S-hooks and crimp the S-hooks closed. Thread the inside chains on the remaining hinged locking ring, alternating the inside chains between the outside chains. Close the ring and throw a putt.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9