Second Question – How do I determine the bolt pattern on my golf cart? Answer – You can measure this by taking a tape measure and measure diagonally from the top stud hole on your wheel hub to the bottom stud hole.
How many wheels on a golf cart?
Under state law, personal transportation vehicles (PTV) have a minimum of four wheels, has a maximum level ground speed of fewer than 20 miles per hour, a maximum gross vehicle weight of 1,375, and a capability of carrying no more than eight passengers. State law bans PTVs on roads with a maximum speed limit over 25 miles per hour.
How to measure a 5 lug wheel bolt pattern?
The easiest way to estimate the 5 lug bolt pattern, is to measure from the back of a hole to the center of the second hole. For a 4 lug wheel, measure center to center of two holes directly across from each other. Measuring a 6 bolt wheel requires you to measure center to center of two holes directly across from each other.
How to measure wheel go kart wheel bolt patterns?
- Light Duty American Hubs, measurement "A" = 2-13/16''
- Heavy Duty American Hubs, measurement "A" = 4''.
- Heavy Duty Metric Hubs, measurement "A" = 110mm or 115mm
Can you put car wheels on a golf cart?
You can put ANY size low profile tire on a golf cart with a 6” lift. However, 8” wheels with 18” tires would look pretty silly on a super tall 6” lift kit. 12”-14” rims, with 22”-25” tires are generally what golf cart owners with 6” lifts prefer.
How are cart wheels measured?
Measure Wheel Size The diameter is measured with the wheel lying flat on its side, and with a measuring device measure from one side of the wheel to the opposite side. If the wheel is 8”, then the caster is considered a 8” caster. It's important to make sure the measuring device passes over the center of the wheel.
How do you measure the bolt pattern on a rim?
To measure a 4-lug pattern on a set of rims, measure from the center of two holes across from each other. For a 5-lug pattern, measure from the outside of one wheel stud hole and the center of the opposite. And for 6- and 8-lug patterns, measure from the center of one hole to the center of the opposite wheel stud hole.
Are golf cart bolt patterns the same?
Golf cart wheels differ in material, finish, size, and bolt patterns.
What size are my golf cart wheels?
The industry standard factory Golf Cart Tires that come on 99% of golf carts are 18x8. 5-8" tires....Tire SizeHeightWidth205/50-1018" Tall8" Wide205/65-1020.5" Tall8" Wide205/30-1217″ Tall8″ Wide215/30-1217.1" Tall8.5" Wide4 more rows•Jan 11, 2018
How do you measure a 5 lug bolt pattern?
1:376:11HOW TO: Measure 5-Lug wheel bolt pattern - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe way that we have to do it on a five lug wheel is we need to measure from the center of oneMoreThe way that we have to do it on a five lug wheel is we need to measure from the center of one circle. Of one lug hole skip a lug hole to the center of a second level.
What is the most common 5 lug bolt pattern?
The most common 5 bolt pattern is 5 on 4-1/2. However, 5 bolt patterns also come 5 on 4-3/4, 5 on 5, and 5 on 5-1/2. It is important to know the bolt pattern before you buy new wheels to ensure a proper fit.
Can you put car tires on a golf cart?
0:143:28What are the Best Tires for My Club Car? | ASK DAVE | Golf Cart GarageYouTubeStart of suggested clipEnd of suggested clipMost golf carts come from the factory with a stock size 18 to 18 and a half inch tall tire. In orderMoreMost golf carts come from the factory with a stock size 18 to 18 and a half inch tall tire. In order to increase this tire height a club car will need a lift kit.
What is a 4 on 4 bolt pattern?
A 4 on 4 inch bolt pattern is measured diagonally on center. The first number indicates the number of lug holes and the second number indicates the diameter of the circle that those holes sit on.
What has a 4x110 bolt pattern?
Let's face it: the 4x110 bolt pattern is most commonly associated with ATVs and for good reason. The most popular ATV brands like Honda, Suzuki Can Am, Polaris, Kawasaki and Arctic Cat all have models that ride on 4x110 bolt pattern wheels. For commanding off road, the Vision Commander is the way to go.
What is a 3/4 offset on golf cart wheels?
On a wheel that has a 3x4 offset, the 3 represents the total inches of the backspacing. The 4 represents the distance from the mounting surface of the wheel to the front edge of the wheel.
What is the offset of a golf cart wheel?
What is wheel offset? The offset is a measurement of the distance from where the axle bolts to the inside of the wheel to the back side of the wheel rim. So on a 7" wide wheel, with an offset of 3+4, the first number is the inner measurement, the second number is the outer measurement.
What size tires fit my golf cart?
The most standard golf carts need an 18” tall tire with an 8” width. The standard golf cart tire size is typically 18” tall by 8” to 8.5” wide. However, some golf carts will require slightly different sizes, depending on the lift of the cart.
What is the standard wheel pattern on a golf cart?
Most golf carts use the standard 4 bolt wheel pattern that has 4 bolt on 4 inch centers. This is true on most EZGO golf carts, Club Cars And Yamaha carts except a very few new models which have a 5 bolt pattern such as the limousine carts.
Can you put tires on a Yamaha golf cart?
Ever wonder about if you can install automotive type car wheels and tires on your EZGO, Club Car or Yamaha golf cart. Well yes you can, as long as you use the correct axle stud bolt pattern to upgrade. Most golf carts use the standard 4 bolt wheel pattern that has 4 bolt on 4 inch centers.
Sizing
Modern golf cart tires are tubeless and come in a wide variety of sizes and tread patterns. All tubeless golf cart tires have a thick ‘bead’ at the inner diameter of the tire on each side and air pressure pushes the bead against the wheel to form an air tight seal.
Tire Pressure
Your golf cart’s tire pressure is critical to long tire life. Proper tire pressure is usually indicated on the sidewall and will vary between brands or models of golf cart tires. Most golf car tires use somewhere between 15 to 25 PSI (pounds per square inch) with an average of about 20-22 PSI.
Tire Tread Patterns
Golf cart tire tread patterns vary from smooth (no tread at all) for greens mowers to straight rib and sawtooth for golf, turf, and street, to every type of knobby imaginable for off-road, mud, sand, and lifted application. We carry a full line of golf cart tires in our online store for golf/street use and for all types of off-road terrain.
Golf Cart Wheels
The rubber tires just described are useless without a golf cart wheel to which it is mounted. Golf cart wheels are generally made from steel or aluminum and can be painted or chromed. Wheels have rim flanges at their outer edges that provide a ‘seat’ for the ‘bead’ of the golf cart tire and a small hole for the valve stem.
How to Read a Wheel Pattern
The first is " 5 " in this example. This tells you exactly how many studs are on the rotor or how many holes are in the wheels.
How to Measure 4-Lug, 6-Lug or 8-Lug Wheel Pattern
When measuring a 4-, 6- or 8-lug wheel pattern, the process is very simple: measure from center of one hole to the center of the opposite hole.
How to Measure a 5-Lug Wheel Pattern
A 5-lug pattern is where things can get confusing. If you don’t have the template handy, you measure from the center of any hole, skip a hole in either direction, then measure to the outside edge of that hole.
How many bolt holes are in a wheel?
For example, a 5-100mm bolt pattern means that the wheel has 5 bolt holes equally spaced on a 100mm circle. This distance is measured across the wheel center. Usually, large vehicles have more bolts arranged in ...
How to measure a 5 bolt pattern?
You can estimate the measurement by using a straight line from the backside of one hole to the center of the third bolt hole.
What is lug hole?
The lug holes are the points on the wheel that accept the lug nut or lug bolt to securely fasten the wheel to your vehicle. The lug holes on your wheels may be small, but they perform a big task by making sure your wheels stay securely fastened to your vehicle.
Why is it important to know your bolt pattern?
Knowing your bolt pattern is critical because it’s how your wheels are secured to your vehicle using lug nuts/lug bolts. Having the right bolt pattern ensures a safe fit, and nothing is more stylish than safety. Never try to install wheels on your vehicle that don’t match your OE bolt pattern, no matter how close in size they might seem to be.
What is a ball seat lug nut?
A ball-seat lug nut/bolt will work with wheels that have a corresponding round lug seat. An acorn-seat lug nut/bolt is used with wheels that have a tapered lug seat. Torque-retention, mag and shank style lugs all have a flat, washer-like seat area that will correspond to a flat lug seat in the wheel. When using a torque-retention, mag ...
Do larger vehicles have more bolts?
Usually, large vehicles have more bolts arranged in a larger bolt circle. Smaller vehicles typically have fewer bolts arranged in a smaller circle. The most accurate ways to measure bolt patterns are depicted in the illustrations below.
Can you use lug nuts on spare wheel?
If you buy replacement lug nuts/bolts, they may not work with your spare wheel.
