how to measure a golf club iron

How to Measure Golf Iron Length.

• Be sure to use the right measuring equipment. This requires a 48-inch ruler/measurement stick/tape measure.
• The golf club should be positioned in the desired position.
• On a flat area, lay the clubface so that it is parallel to the ground. Afterward, lay your palm on the top of the club in order to keep it firmly in ...
• Placing the measuring stick behind the golf club is a great way to get an accurate reading.
• If you’re measuring a golf club’s shaft, set the stick on the ground directly next to its heel. It’s important that the stick’s numbers are facing you ...

Full Answer

How do you measure a golf club?

Length and Height Measurement for Custom Golf Clubs

1. Height measurement There are aspects in height measurement that need consideration. ...
2. Swinging a standard golf club This step is crucial and needs the utmost seriousness if you need your custom golf club. ...
3. Presenting your handicap

How to size golf clubs for better performance?

• Swing the clubs Swinging a standard-length club is an essential step in fitting golf clubs. ...
• Apply tape to the bottom of your clubs This step determines where your club will make contact with the ground. ...
• Identify your handicap Finally, identifying your handicap will allow you to match with the right club type. ...

What is the length of a 5 iron golf club?

There are no specific industry standards for golf club length, but different manufacturers have differing lengths for clubs. A 5-iron from a particular brand is 37.75 inches, others 38 inches or even 38.5 inches long. We cannot stress enough, the importance of a golf club’s length and its effect on your performance.

How do I get measured for golf clubs?

• Take some tape and cover the grip from the tip to the butt.
• Now, make several markings on the tape at a distance of half an inch from each other.
• Step out to the golf range and start hitting your shots from the different lengths that you have marked. ...
• Based on this, you may want to adjust your sand wedge and other golf clubs. ...

How do you measure iron club length?

Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").

What length should my irons be?

The Complete Golf Club Length ChartGOLF CLUBLENGTH FOR MEN (steel/graphite shaft)LENGTH FOR WOMEN (steel/graphite shaft)5-iron38/38.5 inches37/37.5 inches6-iron37.5/38 inches36.5/37 inches7-iron37/37.5 inches36/36.5 inches8-iron36.5/37 inches35.5/36 inches23 more rows

What is the standard length of a 7 iron?

The standard length of a 7 iron is 37 inches on steel and 37.5 inches with the structure made of graphite.

How do I measure myself for a set of golf clubs?

The best way to determine proper shaft length for your custom fit golf clubs is to get into an athletic stance like you're set up to the golf ball, and measure the distance between your wrists and the floor. You can also adjust the shaft length in conjunction with your golf swing.

How should my golf clubs fit my height?

To find the right size clubs for your body, use recent height measurement to determine the proper angle for your clubs. It usually helps to have another person measure, so you get the most accurate measurements possible. Measure your basic height from the top of your head to the bottom of your feet.

How do I know if my irons are too short?

If the heel of the club is off the ground, chances are your clubs are too short. The ideal position is to have your club sitting flat on the ground. If your heel is sitting up a bit, you'll probably find yourself pushing a lot of shots (straight right for the right-handed golfer).

How long is a standard 8 iron?

What is the standard length of an 8 iron? The standard club length of an 8- iron is between 35.5” to 37”.

How far should a beginner hit a 7 iron?

7 Iron – Beginner's Guide Most beginners hit a full 7 iron 100 yards (men) or 60 yards (women). If your golf ball isn't traveling this far with the 7 iron, here are a few tips you can use to get better contact: Play the ball in the middle of your feet.

Are golf irons different lengths?

In a traditional iron set - what some have started referring to as "variable-length irons" - each iron in the set is a different length. The irons get shorter as the number gets higher. A 5-iron is shorter than a 4-iron; a 6-iron is shorter than a 5-iron; and so on.

What is the length of a standard 5 iron?

Standard Club LengthClubMen GraphitLady SteelWood 7#, 9# usw.4139,5Iron 3#39,538Iron 4#3937,5Iron 5#38,53728 more rows

What length clubs do I need?

For example, for a golfer that stands 6'2” and has a wrist-to-floor of 39”, the recommendation for proper club length would be 1/2” longer than standard length.

What is the standard length for golf clubs?

All clubs, including putters, must at least 18 inches long. Putters with straight shafts are measured from the top of the grip to the sole, directly down the shaft.

How to measure golf club?

To measure a golf club, start by laying it on a flat, horizontal surface, like a table or countertop . Then, turn the bottom of the club head so it's at a 60-degree angle to the surface you're measuring the club on. Finally, use a tape measure to measure from the end of the grip to the point where the bottom of the club head meets the flat surface. ...

How to measure club length?

Calibrate the club length measuring apparatus. Turn on the machine and move the grip support assembly to the left until it reaches the end of the apparatus. Put the calibration rod into the machine, resting the right end of the rod against the 60-degree sole plate of the clubhead support.

How to rock a golf club back and forth?

Ensure the clubhead rests against the clubhead support, with the sole touching the 60-degree sole plate. The grip should rest in the grip support. Gently rock the club back and forth to be sure it’s not being constrained and can move naturally.

Where is the sole on a golf club?

The sole is the bottom of the club head. You may need to rest the sole against a plate to ensure it sits at the proper angle. Measure from the end of the grip to the end of the sole. Use a tape measure to find the length in inches between the end of the grip and the farthest point that the sole contacts the horizontal surface.

Which plane should golf clubs be measured on?

Clubs should be measured on a horizontal, rather than vertical, plane to get the most accurate results. ...

How to read scale on a scuba diver?

Slide the grip support until it touches the grip, then read the scale. Move the grip support to the right until the butt plate is gently touching the end of the grip. Step back from the scale and read the digital value. ...

Why is length important in golf?

Length itself is very important as it helps control the distance you hit the ball as well as develop consistency is the length is fitted correctly.

Where is the final length measured?

The final length is measured at the edge of the grip cap (and not the very top). This method is used in all cases except putters that the shaft is not located at the heel. In this method, it is critical that the lie of the club be positioned correctly. If the club is placed with the toe raised higher off of the ground than the heel, ...

What is the USGA method?

USGA Method. The United States Golf Association (USGA) has a method outlined in the Rules of Golf. The USGA uses an apparatus that has a piece of angle iron as a stop that forms at a 60 angle from the horizontal.

Why is the ruler not placed in line with the shaft?

Because the shaft is ahead of the face of the putter, the ruler is not placed in-line with the shaft, rather along the back side of the shaft like an iron would be measured. The difference being that the ruler would touch the ground somewhere other than behind the heel of the club.

What size ruler do you need for golf club reading?

For this, you need a ruler of 48 inches or greater. You can use a measuring tape. However, the flexibility of the tape can hamper the entire procedure. For best readings use a golf club measuring ruler. Now, if you got the ruler in your hands, we can proceed. Follow these steps one after another: Step 1.

How long should a golf club be?

According to USGA the length of a golf club should not exceed 48 inches. So, the length can be either 48 inches or lower. Within this limitation, you can get club sizes of any length depending on your height or style of play.

What is the best length for putters?

For putters. Analyzing the posture and wrist-to-floor measurement, 32-35” can be a good length for putters that most golfers will be comfortable with. Longer putters will cause several problems in your gameplay. It will restrict you from being close to the ball and miss targets in most cases.

What happens if you lie your golf club higher than the heel?

Placing the club with its toe higher than the heel will lessen your club length measurement. Number 2: If you do the opposite which means if the heel is higher above the ground than the toe then your club length will increase.

How long was the driver's club in the 1970s?

Manufacturers have invested in research and understanding user psychology to get the correct length of the club. During 1970s-80s, the drivers had 43 inches of length. For 5-woods it was even lesser, just 41 inches. The reason behind the shifts in club length is the mindset of the golfers.

Where is the ruler on a putter?

The ruler method can be used for putters. Instead of the heel, the ruler is placed beside the center of the putter. This means your ruler must be placed along the shaft to the ground. The ruler must be placed behind the club, and the final reading must be taken from the edge of the grip cap.

Is there a standard length of a golf club?

There is no standard length of a club in golf. So, club makers are free to make clubs that they feel are appropriate for a golfer. Here is what Tom Wishon, the founder of Tom Wishon Golf Technology, has to say- “There are no industry-wide standards for any golf club specification in the golf equipment industry.”.

How long should a golf club shaft be?

Rules of Golf for competition allow for a club shaft length of up to 48 inches, while the average driver length used is closer to 45 inches.

What is the first factor to take into account when playing golf?

The first factor you must take into account is your height . Generally, the taller the player, the longer the clubs. (This isn’t always true, and we’ll walk through that in a moment.)

How long should a putter be?

It’s important to note that there isn’t a standard length for putters! Most putters range between 32 and 37 inches in length. Control and accuracy are critical here, and as such there is no standard rule of thumb for choosing a putter. You’ll need to account for your experience, comfort, stance, and putting style when choosing the best putter length. This is best done by trying out several different putter lengths in your local golf shop or sporting goods store.

What happens if you have too much flex in your golf club?

Club flex is directly related to ball trajectory, and if you have too much flex, you could have trouble getting air under the ball or could experience hook shots. Alternatively, if your club has too little flex, you may slice. You should consider how long you typically drive the ball when thinking about club flex.

What is the difference between a longer club and a shorter club?

It’s easy to overlook this detail, but a club length has a lot to do with a player’s swing mechanics. The shorter the club, the more upright a player needs to swing in order to hit the ball effectively, while a longer club will require more of a flat swing.

Why is a longer club shaft better for driving?

Club head speed is a big influence in your shot’s distance, and a longer club shaft increases the head speed, allowing you to hit the ball farther. This is why you’ll often see longer drivers in use during long drive competitions.

Is golf expensive?

Golf can be an expensive sport, but buying the wrong club can make it expensive and frustrating, as club length affects both the playability of your clubs and your overall skill. Make sure your purchase is the best option for your game.

Why measure golf clubs?

You may also need to measure the clubs to ensure that they are regulation length for an upcoming tournament or event. It is important to know the proper way to measure the entire length of a golf club.

Where to place measuring stick on golf club?

Place the measuring stick directly behind the golf club . The stick should make contact with the shaft of the club and be placed on the ground right at the heel of the golf club you are measuring. The numbers on the stick should be pointed toward you so you can easily obtain a reading.

How to hold a golf club steady?

The face of the golf club should be laying flat on a flat surface so that the face is parallel to the ground. Then, place your hand on the top of the club to hold it steady.

What factors affect the size of a golf club?

Here’s another factor that affects the appropriate golf club size. The angle and the grip size of the club are as important as the height and wrist-to-floor measurements . However, this means more to serious professional golfers than to someone just starting out.

How tall is a golf club?

Manufacturers usually make clubs to account for golfers anywhere between 4’8” to 6’7” inches tall. The second measurement is wrist-to-floor distance. This is done by standing on a flat surface with your arms relaxed and pointing down. You then measure the distance between the ground and the line where your wrist meets your hand.

Why do manufacturers make golf tables?

Manufacturers create such tables to help everyone from beginner golfers to pro golfers choose the right club size for their play. Here’s how your size affects the dimensions of your needed golf club size and why it matters. Last but not least, the grip size should also be determined for the club to fit perfectly in your hands.

What is the difference between men's and women's golf clubs?

The difference between men’s and women’s clubs is generally noticeable on the grip. Men’s golf clubs have larger grips and are also about 2.5 cm longer than women’s golf clubs. Kids’ clubs are even smaller than women’s for the most part. Knowing what type of golf club you need is the first step in determining the appropriate size.

What is plus and minus golf clubs?

The adjustments on a size chart are made with reference to the standard clubs. Therefore, the plus and minus values show how much shorter or longer your golf club should be compared to the standard, according to your measurements, ...

What is the second measurement of a grip?

The second measurement is the length of your middle finger from the tip to its base. When you have these two measurements, you can then find the appropriate grip size on a manufacturer’s size chart. Note that we only use the middle finger as an example as it applies to most people.

Can you play golf with an off size club?

Because there are plenty of variations, it’s unsurprising that a lot of people sometimes play with off-size clubs. Most pros recommend that even beginners should opt for a perfectly sized golf club in order to have the best learning experience.