How to Measure Golf Clubs
- Place the club on a flat, horizontal surface.
- Ensure the sole is at a 60 degree angle from the surface...
- Measure from the end of the grip to the end of the sole.
- Calibrate the club length measuring apparatus.
What is the standard length for a golf club?
What Is the Standard Length of a Golf Club?
- Rules of Golf. The rules regarding golf club construction are found in Appendix II of the Rules of Golf, published by the United States Golf Association.
- Graphite Vs. Steel. ...
- Drivers. In a 2010 “Golf Digest” article, PGA Tour player Bubba Watson said the typical off-the-rack driver is 45.5 inches long.
- Irons and Hybrids. ...
Should all my golf clubs be the same length?
Some sets are made with all clubs the same length as the eight or six iron, but the seven iron is the most popular. You will still need to make sure you get your clubs fitted adequately for you; in fact, it is more important with the one length than with variable length. There are lots of reasons to switch to a one-length iron.
What length golf clubs do you need?
- 3-wood
- 4- and 5-hybrids
- 6- to 9-irons
- Pitching wedge
- Sand wedge
- Driver
- Putter
How to shorten the length of a golf club?
- Remove The Grip
- Remove The Grip Tape
- Measure Twice and Cut Once
- Make The Cut
- File Off Any Lose Edges On The Cut Line
- Place A New Grip On The Club
- Add Weights to balance any change in swing weight
- Go Try Out Your New Shorter Length Club
How do you determine golf club length?
To get an accurate measurement of club length. Measure the club at the angle that the bottom of the clubhead lies in its playing position on the floor. Measure from the floor to the end of the Grip. Before we use the chart below, it is important to know your height and your wrist-to-floor measurement.
How do you measure club length at home?
0:522:42Measuring Golf Club Length Video Blog From Hireko Golf Part 1YouTubeStart of suggested clipEnd of suggested clipThe club needs be positioned. With the center of the sole touching the ground in your ruler. Back byMoreThe club needs be positioned. With the center of the sole touching the ground in your ruler. Back by the heel touching the ground. This is the correct way to measure. If the club is too upright.
How long should my golf clubs be for my height?
Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").
How do I measure my golf clubs with a tape measure?
Measure from the end of the grip to the end of the sole. Use a tape measure to find the length in inches between the end of the grip and the farthest point that the sole contacts the horizontal surface. This is the length of your golf club!
What is the standard length of a 7 iron?
What is the Standard Length of a 7 Iron? The standard length of a 7 iron is 37 inches on steel and 37.5 inches with the structure made of graphite. For women, the standard length of a graphite golf club is 36.5 inches, and for steel, it is 36 inches. The standard lengths are set from the shaft weights of the golf club.
What is standard length for golf irons?
The standard length of a steel 9 iron is 35.5 inches. For female golfers, the average length is 34.5 inches. With graphite shaft, the standard length for men is 34.35 inches and for women, it is 33.75 inches. A 9 iron club is categorized as a short iron golf club.
How do you know if your golf clubs are too long?
5 Signs Your Golf Clubs are Too LongYou need to stand up almost completely straight while holding the club.You can't move your lower body while swinging the golf club.You keep hitting the ball with the golf club's toe.The ball tends to veer off to the left or too high when hit by the club.More items...•
How do I know if my golf clubs are too short?
4:136:06CLUBFITTING | Are Your Irons the Correct Length? | The Golf ParadigmYouTubeStart of suggested clipEnd of suggested clipIf you'll notice every single groove on a club is 1/8 inch apart. The difference in your clubs.MoreIf you'll notice every single groove on a club is 1/8 inch apart. The difference in your clubs. Being a half inch too short or too long is a difference let's say it's too short is the difference
What happens if your clubs are too long?
3. Odd Ball Flight. While there are a slew of other reasons why your ball might not fly the way it should, it can also be an indicator that you're struggling with too-long golf clubs. Typically, when golf clubs are to blame, the ball will fly far too high and steer off to the left.
What is the standard length of a 6 iron?
The Complete Golf Club Length ChartGOLF CLUBLENGTH FOR MEN (steel/graphite shaft)LENGTH FOR WOMEN (steel/graphite shaft)4-iron38.5/39 inches37.5/38 inches5-iron38/38.5 inches37/37.5 inches6-iron37.5/38 inches36.5/37 inches7-iron37/37.5 inches36/36.5 inches23 more rows
How does ping measure club length?
Understand that Ping uses your height and wrist-to-floor measurement to determine the shaft length for your iron fitting. Remember that the taller you are, the longer your shafts should be, and the shorter you are, the shorter your shafts should be.
What is a standard length golf club?
Standard Club LengthClubMen GraphitLady SteelIron 6#3836,5Iron 7#37,536Iron 8#3735,5Iron 9#36,53528 more rows
How long should a golf shaft be?
The chart recommends + 0.25 inches. It means that your golf shaft has to be made 0.25 inches longer than the standard length. Similarly, if your height is 66“ and the wrist to floor distance is 31.5 inches, the chart recommends – 0.75 inches.
How to measure golf club length?
Important Information before we know “How to Measure the Golf Club Length.” 1 The standard irons designed for women are usually an inch shorter than the standard irons designed for men. 2 The United States Golf Agency (USGA) limits the maximum length of golf clubs. 3 The minimum length for all the golf clubs, including putters, is 18 inches. 4 The maximum length for all golf clubs except the putters is 48 inches. 5 The putters do not have the maximum length limit. 6 The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length. 7 A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three.
What does a longer shaft mean?
The longer shaft does mean longer golf club length. A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three. Therefore we must know about the standard length of the woods, and irons. Let’s first discuss the standard lengths of woods.
How to measure club size with LDA?
The following are steps of measuring the club size using the LDA method. Step 1. First, put the shaft against the wall so that the toe of the driver is placed on the ground. Step 2.
What is the minimum length of a golf club?
The minimum length for all the golf clubs, including putters, is 18 inches. The maximum length for all golf clubs except the putters is 48 inches. The putters do not have the maximum length limit. The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length.
Where is the shaft of a putter located?
It is because the shaft of the putter is mostly installed in the heel. The shaft placement is either near the heel or in the center of the club head. Therefore, it is essential to measure the putter differently. The method of measuring the length of a putter is described in the following steps. Step 1.
What is the USGA method?
Method 5: The United States Golf Association (USGA) Method. The USGA method is part of the rule book’s method: “Rules of Golf.”. In it, an apparatus containing an angle iron is used. The angle iron forms a 60-degree angle from the horizontal, and it is also used to stop /hold the iron.
How to measure club length?
Calibrate the club length measuring apparatus. Turn on the machine and move the grip support assembly to the left until it reaches the end of the apparatus. Put the calibration rod into the machine, resting the right end of the rod against the 60-degree sole plate of the clubhead support.
How to rock a golf club back and forth?
Ensure the clubhead rests against the clubhead support, with the sole touching the 60-degree sole plate. The grip should rest in the grip support. Gently rock the club back and forth to be sure it’s not being constrained and can move naturally.
How to measure golf club?
To measure a golf club, start by laying it on a flat, horizontal surface, like a table or countertop . Then, turn the bottom of the club head so it's at a 60-degree angle to the surface you're measuring the club on. Finally, use a tape measure to measure from the end of the grip to the point where the bottom of the club head meets the flat surface. ...
How to read scale on a scuba diver?
Slide the grip support until it touches the grip, then read the scale. Move the grip support to the right until the butt plate is gently touching the end of the grip. Step back from the scale and read the digital value. ...
Where is the sole on a golf club?
The sole is the bottom of the club head. You may need to rest the sole against a plate to ensure it sits at the proper angle. Measure from the end of the grip to the end of the sole. Use a tape measure to find the length in inches between the end of the grip and the farthest point that the sole contacts the horizontal surface.
Which plane should golf clubs be measured on?
Clubs should be measured on a horizontal, rather than vertical, plane to get the most accurate results. ...
How to measure a golf club?
For putters, you want to measure from the sole of the putter to the end of the grip. So, to do this, you need to follow the steps we outlie below. 1 Lay your putter flat on the ground 2 Begin with a tape measure at the top of the grip 3 Measure straight along the shaft, continuing through any offset or hosel change 4 Once you reach the bottom of the club, still going along the direction of the shaft, that is the length of your putter
How to shorten a golf club?
When you need to shorten a golf club, you can keep the same shaft by physically cutting it. This is not a complicated process, but one that requires precision. First off, the club needs the grip removed. You’ll need a new one regardless so don’t bother trying to preserve it. After that the shaft is cut and regripped.
How to measure a putter shaft?
So, to do this, you need to follow the steps we outlie below. Lay your putter flat on the ground. Begin with a tape measure at the top of the grip. Measure straight along the s haft, continuing through any offset or hosel change.
How to measure golf club heel angle?
1. Lay the club flat so that the toe of the club faces directly up . 2. Make sure that the ground and middle of the club are at a 60-degree angle (club will sit this way if toe is directly up. 3. Measure from top of grip to spot where heel of club would intersect with the ground (60-degree angle coming in) Measuring these clubs has a bit more ...
How long do golf clubs have to be?
According to the USGA, golf clubs need to be within a certain length. All clubs (minus putters) must be at least 18 inches long, and no more than 48 inches. You should not have trouble meeting the minimum length or the longest length.
Can you lengthen a golf shaft?
Unfortunately, there is no way to lengthen an existing shaft. If you want a club you own to be longer, it requires the purchase and installation of a new shaft. When one club breaks, whether it be from frustration or through gameplay, a single shaft can be replaced.
Can you put a putter straight up?
Some people like to be straight up while putting, others prefer a bit hunched over. As long as your eyes are over the ball and the putter sits flat on the ground without the toe up in the air as you make your stroke, any length is fine. For putters, you want to measure from the sole of the putter to the end of the grip.
What size ruler do you need for golf club reading?
For this, you need a ruler of 48 inches or greater. You can use a measuring tape. However, the flexibility of the tape can hamper the entire procedure. For best readings use a golf club measuring ruler. Now, if you got the ruler in your hands, we can proceed. Follow these steps one after another: Step 1.
How long should a golf club be?
According to USGA the length of a golf club should not exceed 48 inches. So, the length can be either 48 inches or lower. Within this limitation, you can get club sizes of any length depending on your height or style of play.
What is the best length for putters?
For putters. Analyzing the posture and wrist-to-floor measurement, 32-35” can be a good length for putters that most golfers will be comfortable with. Longer putters will cause several problems in your gameplay. It will restrict you from being close to the ball and miss targets in most cases.
What happens if you lie your golf club higher than the heel?
Placing the club with its toe higher than the heel will lessen your club length measurement. Number 2: If you do the opposite which means if the heel is higher above the ground than the toe then your club length will increase.
How long was the driver's club in the 1970s?
Manufacturers have invested in research and understanding user psychology to get the correct length of the club. During 1970s-80s, the drivers had 43 inches of length. For 5-woods it was even lesser, just 41 inches. The reason behind the shifts in club length is the mindset of the golfers.
Where is the ruler on a putter?
The ruler method can be used for putters. Instead of the heel, the ruler is placed beside the center of the putter. This means your ruler must be placed along the shaft to the ground. The ruler must be placed behind the club, and the final reading must be taken from the edge of the grip cap.
Can custom fitters get the job done faster?
Club lengths might vary person to person, so it’s better to take expert opinion and support. Custom fitters can get the job done faster and easier.
Why Is Choosing the Right Club Length Crucial?
There are several reasons why you should measure your golf club length. For starters, if you play with a club that’s too long or too short, you could end up changing your swing or stance in a way that could impact the outcome negatively. It can also result in inconsistent ball striking when you subconsciously make compensations for your swing.
Components of Club Length
When it comes to choosing the best driver and irons, there are several factors that you should consider. Here’s a quick overview of the components of club length.
Methods to Measure Club Length
Here’s an interesting fact according to the Telegraph Trusted Source The secret to mastering golf: play with your other hand Scientists say swapping hands boosts swing control and accuracy, with technique used by top players such as Jordan Spieth and Phil Mickelson www.telegraph.co.uk ; playing with your other hand helps you to master golf.
Ideal Club Length Chart
There’s no standard length of golf clubs which gives clubmakers the freedom to make golf clubs that they assume would be appropriate. You should, however, note that while there is no ideal club length, the USGA has placed a limitation on the maximum length; 48 inches.
Final Thoughts
To sum it up on how to measure golf club length, the ideal length varies based on the player’s height. We have highlighted 2 simple methods that you can use to measure your ideal length, but if for a more thorough fitting, we recommend that you contact a professional.
What is custom measurement golf?
Custom measurement is designed to equip you with golf clubs that suit your needs and your game type. These measurements are necessary for providing the appropriate golf clubs. The steps below outline steps for you to measure and acquire custom golf clubs from a golf store.
Why are handicaps important?
Handicaps have proven to be useful in many ways. The data helps determine the best measurements for a custom-made golf club. Amateur players with a high handicap have a great chance of improving their game using custom fit golf clubs.
What happens if you play a golf club too long?
Your posture will be affected. If the club is too long, you will tend to be more upright. When the club is too short, you will tend to bend forward more than you should . You should therefore pick a club that is custom made for your type of play.
Why do you not pick a red coat?
For instance, you do not just pick a red coat because you love the colour. There are many factors that you need to consider, such as the material used. Customizing a golf club with the correct length for your height will result in an outstanding performance on the course.
What to do if you don't have a handicap?
If you don’t have a handicap, clearly explain to the fitters your skill level, as this can go a long way in finding something that fits you perfectly. Remember, the ultimate goal is to find a golf club that can change your game for the better.
Why do you need to fit a golf club?
A custom-fit golf club will improve your game and performance on the scoreboard. Therefore you should fit your golf club appropriately per your type of play. As a golfer, you should make sure that your golf clubs are fitted to the appropriate lengths.
How tall is a man?
The average height for a human being varies from man to woman. A man’s average height stands at approximately 5’10” while that of their female counterparts stands at 5’5″. With these figures in mind, manufacturers design clubs with a 1″ difference in length between men and women.
How to measure wrist for golf club?
Step 2. Stand with your hands hanging loosely by your side. Have your assistant measure the distance from where your wrist hinges to the ground, going straight down. This is your wrist-to-floor measurement. Step 3. Use the "Golf Club Measurement Guide" (see Resources).
How much shorter are ladies golf clubs than men?
Ladies' standard-sized golf clubs run approximately 1-inch shorter than men's clubs.
What is the average size of a golf club for women?
As a result, the standard size of golf club for women is shorter in length and is designed for women that are between 65-inches (5'5") and 69-inches (5'9") tall. For women who are shorter than 5'5", golf manufacturers produce a "petite" golf club that is both shorter and lighter than the standard length club.
Where is Jackson Lewis?
Based in Memphis , Jackson Lewis has been writing on technology-related material for 10 years with a recent emphasis on golf and other sports. He has been freelance writing for Demand Media since 2008. Lewis holds a Master of Science in computer science from the United States Naval Postgraduate School.
What factors affect the size of a golf club?
Here’s another factor that affects the appropriate golf club size. The angle and the grip size of the club are as important as the height and wrist-to-floor measurements . However, this means more to serious professional golfers than to someone just starting out.
Why do manufacturers make golf tables?
Manufacturers create such tables to help everyone from beginner golfers to pro golfers choose the right club size for their play. Here’s how your size affects the dimensions of your needed golf club size and why it matters. Last but not least, the grip size should also be determined for the club to fit perfectly in your hands.
What is the difference between men's and women's golf clubs?
The difference between men’s and women’s clubs is generally noticeable on the grip. Men’s golf clubs have larger grips and are also about 2.5 cm longer than women’s golf clubs. Kids’ clubs are even smaller than women’s for the most part. Knowing what type of golf club you need is the first step in determining the appropriate size.
How tall is a golf club?
Manufacturers usually make clubs to account for golfers anywhere between 4’8” to 6’7” inches tall. The second measurement is wrist-to-floor distance. This is done by standing on a flat surface with your arms relaxed and pointing down. You then measure the distance between the ground and the line where your wrist meets your hand.
What is plus and minus golf clubs?
The adjustments on a size chart are made with reference to the standard clubs. Therefore, the plus and minus values show how much shorter or longer your golf club should be compared to the standard, according to your measurements, ...
What is the second measurement of a grip?
The second measurement is the length of your middle finger from the tip to its base. When you have these two measurements, you can then find the appropriate grip size on a manufacturer’s size chart. Note that we only use the middle finger as an example as it applies to most people.
Can you play golf with an off size club?
Because there are plenty of variations, it’s unsurprising that a lot of people sometimes play with off-size clubs. Most pros recommend that even beginners should opt for a perfectly sized golf club in order to have the best learning experience.
