Using a gram scale along with general purpose tools
- Measure the balance point distance of the golf club in inches from the end of its grip cap.
- Measure the total weight of the golf club using the gram scale.
- Deduct 14 inches from the above value and multiply the result with the total weight of the golf club that is measured in...
- This value is the torque above the club a...
How do you measure a golf club shaft?
Measure the shaft of the golf club from the point where the club balances over the pivot point to the grip end at the top of the golf club using a tape measure. This measurement can be made in inches, centimeters or millimeters.
Where is the balance point on a driver shaft?
As mentioned before, the balance point of the shaft is not always located at the center of the shaft. Actually it is rarely there as most shafts for driver have a balance point that is approximately 52% from the tip of the shaft. Shaft balance points in driver shafts range from 48% from the tip to 56% of the length of the shaft.
How much does the balance point change affect the shaft weight?
Using the same head, grip and length, you can see nearly a 5 swingweight point differential just by the balance point change. To put that in perspective, the 5 swingweight point differential has nearly the same effect as a 35g shaft weight change (when the balance point is in the shaft’s center).
How many bend points does a golf shaft have?
A golf shaft has only one bend point. The majority of club Manufacturers do publish their bend points of new shafts. Older shafts may not be labeled. Trimmed shafts used to customize club length may not have been tested for bend point prior to installation. We routinely perform this task when we build, repair, or retro-fit clubs.
What does high balance point mean on a golf shaft?
0:212:18High Balance Point Shafts - YouTubeYouTubeStart of suggested clipEnd of suggested clipHead you're going to be increasing your swing weight. And as the increasing swing weight goes onMoreHead you're going to be increasing your swing weight. And as the increasing swing weight goes on then you're probably gonna be losing a little bit of club head speed.
How do you counter balance a golf club?
Counter weighting goes by many names, but, no matter what you call it, we're talking about the same thing: adding weight to the butt end of the golf club. When you add weight to the butt end of the club, you shift the balance point of the club towards your hands and raise the overall static weight of the club.
What is a counter balance golf shaft?
Counter-balanced shafts are configured to add more weight near the butt of the club, creating a lighter head feel, reduce swing weight by 2 to 3 points, and generating more club head speed.
Where should the club shaft point at address?
0:085:31Golf Tip - How Should I Position The Shaft At Address - YouTubeYouTubeStart of suggested clipEnd of suggested clipSomething there it's not too far forward it's a very easy to change. And then the loft and theMoreSomething there it's not too far forward it's a very easy to change. And then the loft and the clubface. Position at that point there.
Who benefits from a counterbalanced driver shaft?
The counterbalancing adds more weight to the butt end of the club instead of leaving it in the head where it would have traditionally been located. Since the balance point of the club is so high, the head of the club will feel much lighter. Some players feel as though this helps them to swing the club faster.
What is the average swing weight on tour?
The driver swing weight on Tour is probably between D-3 and D-8, but compared to the irons, it is much more individual and there are many ways to optimise the performance.
How do you counter balance a driver shaft?
0:543:07Counter Balance Driver Shaft - YouTubeYouTubeStart of suggested clipEnd of suggested clipRight. With the counterbalance shop so you can't square it the head's too heavy for him really soMoreRight. With the counterbalance shop so you can't square it the head's too heavy for him really so leaves that open a little bit right when he gets it the interesting thing is his smash factor goes up.
Are Hzrdus shafts counterbalanced?
The other unique aspect of the HZRDUS Smoke Yellow is that it's counterbalanced. This means that there is more weight in the grip section to reduce the swing weight.
Is Ping Tour shaft counter balanced?
PING ALTA CB Slate Shaft Continuing PING's belief in counter-balanced technology, the driver shaft is engineered with an 8-gram plug in the end of the shaft to deliver more momentum and forgiveness.
Should I lean my shaft forward at address?
PHOTO PROVIDED In most cases, the butt of the club should point no more than one to two inches ahead of your belt buckle, more to the center is best. More golfers than not, have too much shaft lean at the address position. Leaning the shaft toward the target actually can cause a slice and a low trajectory.
Should driver sit flat at address?
Drivers should always have the toe up at address ' if the hands return close to this position while impacting the ball -- because during the last portion of the swing there is a centrifugal force of up to 70 pounds just before impact, acting at the center of gravity (c.g.) of the head.
Should irons sit flat at address?
How should a golf club lie on the ground? The golf club should address the ball with the toe set a few millimetres in the air – the clubhead should never sit flat on the turf. You should be able to fit a small coin under the toe of the club at address, with the heel remaining in contact with the ground.
What is the balance point of a driver shaft?
Shaft balance points in driver shafts range from 48% from the tip to 56% of the length of the shaft. Shafts that have a balance point less than 50% are considered tip heavy and rare in driver shafts. Center balanced is where the shafts balance point is exactly in the middle. Lastly, if the balance is more toward the butt or ...
What happens to the shaft flex of a golf club when the swingweight is lower than D1?
However, if the swingweight of the club is lower then D1, and then the shaft flex becomes progressively stiffer. Conversely, the higher the swingweight of the club over D1, then the more flexible the shaft becomes. This is only true if standard grip weights (50g +/- 5g) are being used. But shaft weight alone is not the only consideration as ...
How many gram inches is a swingweight?
Every swingweight is equal to 50 gram-inches. That means for every 6.5g of shaft weight with a balance point 7.75" beyond the fulcrum changes the swingweight by one point. The 6.5g only applies at this length as it will become increasingly more the shorter the club / shaft are.
Where is the balance point on a monkey wrench?
Balance Point – The Monkey Wrench in the Equation. As mentioned before, the balance point of the shaft is not always located at the center of the shaft. Actually it is rarely there as most shafts for driver have a balance point that is approximately 52% from the tip of the shaft. Shaft balance points in driver shafts range from 48% from ...
Can shaft manufacturers dictate what length and swingweight the clubs are assembled to?
Since shaft manufacturers cannot dictate what length and swingweight the clubs are assembled to with their products, they have to know that manufacturers typically build to a narrow swingweight range. By knowing this, the flex of the shaft can be built into the design.
How many bend points does a golf shaft have?
A golf shaft has only one bend point. The majority of club Manufacturers do publish their bend points of new shafts. Older shafts may not be labeled. Trimmed shafts used to customize club length may not have been tested for bend point prior to installation.
What are the properties of a golf shaft?
Shaft properties, including flex, torque, bend point (also referred to as kick point or flex point), shaft length and weight, play important roles. These factors affect the balance and feel of golf clubs as well as ball trajectory. Particularly, graphite shafts come with a wide range of specifications. Shaft flex is probably the most important and ...
What does a bend point on a shaft mean?
Once the bend point location is identified, this will indicate the degree of shaft tip stiffness. If a shaft is considered to be “tip stiff” – this means it is “butt flexible”. Hence, the bend point is located closer to the butt end of the shaft than the tip. This is what is termed as a High Bend Point. On the other hand, if a shaft is thought ...
What are shaft profiles?
At a minimum, most shafts will have profiles that identify the “stiffness” in the butt section, mid section and tip section.
Why do golfers use low bend points?
It is also a function of feel. A low bend point generally works for golfers who want to feel the club head more in the swing.
Which shaft is better for a golfer?
When a golfer has an accelerating club head speed with a late wrist release into impact, they will usually hit better with a stiff tip shaft. Conversely, if a golfer has a decelerating club head speed coming into impact with an early wrist release, they tend to hit better with a medium or soft tip shaft. Of course, ball flight observation can ...
Where is the bend point on a golf club?
The bend point is located closer to the tip rather than the butt end . This is referred to as a Low Bend Point. The Bend Point only moves a small distance in all shafts. However, the movement can dramatically change the shaft’s playing characteristics – how the club performs.
How does the weight of a golf club affect the shaft?
The swing weight of a golf club is often directly proportional to the weight of its head. If the clubhead is heavy, the swing weight will also be heavy. This will result in the shaft playing soft. When the clubhead is light, the shaft will play stiff.
How to adjust golf swing weight?
As a general rule of thumb, increasing the weight of the clubhead by two grams increases its swing weight by one point. Similarly, increasing the length of the golf club by one inch boosts the swing weight by six points.
How to increase weight of golf club?
Using a lead tape to increase the swing weight. Stick a few lead tape strips on the clubhead of your golf club. Depending on the width of the tape, a 1-inch long strip of tape will increase the weight of the club by 1 gram. Apply the strips on the lower back of the golf club towards its center.
What does shaft weight mean?
As the name indicates, shaft weight refers to the weight of the shaft of your golf club. Shaft weight is an important aspect of any golf club and can have various consequences on your game. Incorrect shaft weight can affect your ball speed, result in wrong shots, lessen your distance and increase your dispersion.
What are the factors that affect the swing weight of a golf club?
There are four key factors that can have an impact on the swing weight of a golf club: Weight of your club’s grip. Weight of your club’s head. Weight of your club’s shaft. Length of your club. Altering just one of these parameters will modify the swing weight and in turn the feel of your golf club when you use it.
What is swing weight?
Swing weight refers to the weight of a golf club at one-third of its top section (head) and two-thirds of its bottom section (grip). Although swing weight can have a major impact on a golfer’s performance, it can’t be considered as an absolute measurement.
Why is my golf ball fat?
Turf contact. A heavy swing weight may result in hitting the golf ball thin. In contrast, you may be hitting the ball fat because of too light swing weight. Shot contact with the club. If the swing weight is heavy, the shots tend to get hit towards the golf club’s heel.
What is shaft testing?
When testing golf shafts, there are a number of tests that are used in the industry to assure the quality, characteristics, durability and performance of a golf shaft. Each shaft manufacturer and some equipment manufacturers have tests that each shaft must pass in order to be released for sale.
What is the CPM of a shaft?
For example, a shaft may have a CPM reading of 245 cpms in one orientation and when the shaft is rotated 90 degrees, the CPM reading may be 250, ...
What is high balance shaft?
A relatively new trend that is becoming apparent in shafts are so-called high balance shafts. These have - as the name already reveals - the centre of gravity more in the grip section. This can be achieved, for example, by making the shaft a little thicker at this point or by making it slightly heavier with materials such as tungsten. The idea behind this is simply to make the swing weight lighter without changing the club head, grip or shaft length too much. Or that you can increase the total weight of the club without making the swing weight much heavier.
What side does a golf ball hit on when the clubface is closed?
If the clubface is too closed the ball tends clearly to the left. If the clubface is open, the ball stays on the right side. All in all the hitting pattern was relatively far left. The other values are quite good for a wood 3 with a launch of 11.4° and 3118rpm backspin.
