How to Measure Golf Club Length
- Measure Your Overall Height (i.e. “static” fitting) The measurement of your overall height is the first, most basic...
- Get Your Wrist-to-Floor Measurement (once more, “static” fitting) Now, this measuring approach is the most commonly...
- In-Swing Factors (i.e. “dynamic” fitting)
Full Answer
How to measure the length of golf clubs?
Based solely on the overall height, here’s the golf club length chart: 2. Get Your Wrist-to-Floor Measurement (once more, “static” fitting) Now, this measuring approach is the most commonly used for acquiring a proper or accurate length of golf clubs. Seems like a more complete method indeed.
What's new with Callaway Golf Club length?
Added to Cart! As of 01/01/20, Callaway Golf has changed and improved the way we measure club length for drivers, fairway woods, hybrids, irons and wedges. This change will increase the accuracy and consistency of our production and custom club builds.
What is the buy-back guarantee for Callaway Golf Clubs?
The amount we will pay under the Buy-Back Guarantee is based on the length of time you have played the club: 90% back up to 30 days, 80% from 31-60 days, and 70% from 61-90 days. Verification that your Certified Pre-Owned purchase is 100% Callaway Golf.
What lie angle do I need for my golf clubs?
Typically speaking, shorter golfers are going to need a flatter lie angle on their clubs. The taller golfers need an adjustment to make the club more upright. To determine the lie or loft adjustment that your golf clubs are going to need, you will need to hit some shots off of a lie board.
How does Callaway measure club length?
Callaway Golf - Club Length Measurement Change Specifically, we have transitioned to a method commonly referred to as “ground plane”, using a proprietary digital gage modeled after the USGA's measurement protocol.
How do I know what length my golf clubs are?
Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").
What is Callaway standard length?
As of 2012, Callaway drivers are 45.5 to 46 inches long, according to the company's website, while Cleveland lists drivers ranging from 45.25 to 46.25 inches long. According to "USA Today," Cobra began marketing a pair of 48-inch drivers – the maximum legal length according to the Rules of Golf – in early 2012.
What is the standard length of a Callaway 5 iron?
38 inchesCallaway's X-16 5-iron is 38 inches, while Ping's i3+ is listed at 37.75 inches.
How do you measure golf clubs at home?
0:522:42Measuring Golf Club Length Video Blog From Hireko Golf Part 1YouTubeStart of suggested clipEnd of suggested clipThe club needs be positioned. With the center of the sole touching the ground in your ruler. Back byMoreThe club needs be positioned. With the center of the sole touching the ground in your ruler. Back by the heel touching the ground. This is the correct way to measure. If the club is too upright.
How long is a standard length golf club?
So What Is the Standard Golf Club Length? Based on the average wrist-to-floor measurement and overall height, the standard length of golf clubs is anywhere between 34 and 35.5 inches.
How long are standard length irons?
The standard length of a steel 9 iron is 35.5 inches. For female golfers, the average length is 34.5 inches. With graphite shaft, the standard length for men is 34.35 inches and for women, it is 33.75 inches.
What is the standard length of a 56 degree wedge?
The average length of 56 degree wedge golf club is 35.25 inches (89.54 cm). This is about the same length as a sand wedge. Women's wedges are designed to be an inch shorter than men's wedges. Men's steel 56 degree wedge has a length of 35.25 inches (89.54cm), while a graphite wedge is sized at 35.75 inches (90.81cm).
Are all golf clubs standard length?
Even though the Rules of Golf for competition allow the club shaft length of up to 48 inches, Golf Monthly notes that the average driver length used on the tour is 'only' 44.5 inches, while the average driver length in golf shops is about 45.5 inches.
How long should my driver be for my height?
Tony Finau is one of the tallest golfers on the PGA Tour at 6'4″, and his driver's length is usually around 45 inches. Both Finau and Fowler are two of the longest drivers on the PGA Tour....Driver Shaft Length Based Solely on Height.Height (feet/inches)Driver Shaft Length5'0″-5'2″44.5″4'10”-5'0″44″< 4'10”43″7 more rows•May 9, 2021
How to measure golf club length?
Important Information before we know “How to Measure the Golf Club Length.” 1 The standard irons designed for women are usually an inch shorter than the standard irons designed for men. 2 The United States Golf Agency (USGA) limits the maximum length of golf clubs. 3 The minimum length for all the golf clubs, including putters, is 18 inches. 4 The maximum length for all golf clubs except the putters is 48 inches. 5 The putters do not have the maximum length limit. 6 The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length. 7 A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three.
What is the minimum length of a golf club?
The minimum length for all the golf clubs, including putters, is 18 inches. The maximum length for all golf clubs except the putters is 48 inches. The putters do not have the maximum length limit. The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length.
How long should a golf shaft be?
The chart recommends + 0.25 inches. It means that your golf shaft has to be made 0.25 inches longer than the standard length. Similarly, if your height is 66“ and the wrist to floor distance is 31.5 inches, the chart recommends – 0.75 inches.
How to measure club size with LDA?
The following are steps of measuring the club size using the LDA method. Step 1. First, put the shaft against the wall so that the toe of the driver is placed on the ground. Step 2.
What is the USGA method?
Method 5: The United States Golf Association (USGA) Method. The USGA method is part of the rule book’s method: “Rules of Golf.”. In it, an apparatus containing an angle iron is used. The angle iron forms a 60-degree angle from the horizontal, and it is also used to stop /hold the iron.
Where to place ruler on golf club?
Place the club in the playing position so that the sole of the club / driver is touching the ground. A golf ruler is then placed at the backside of the club so that the top of the ruler is touching the ground by the club’s heel. Now, by using the reading on the measuring rod from the end of the grip cap.
Where is the shaft of a putter located?
It is because the shaft of the putter is mostly installed in the heel. The shaft placement is either near the heel or in the center of the club head. Therefore, it is essential to measure the putter differently. The method of measuring the length of a putter is described in the following steps. Step 1.
Why is length important in golf?
Length itself is very important as it helps control the distance you hit the ball as well as develop consistency is the length is fitted correctly.
Where is the final length measured?
The final length is measured at the edge of the grip cap (and not the very top). This method is used in all cases except putters that the shaft is not located at the heel. In this method, it is critical that the lie of the club be positioned correctly. If the club is placed with the toe raised higher off of the ground than the heel, ...
What is the USGA method?
USGA Method. The United States Golf Association (USGA) has a method outlined in the Rules of Golf. The USGA uses an apparatus that has a piece of angle iron as a stop that forms at a 60 angle from the horizontal.
How long should a golf club be?
According to USGA the length of a golf club should not exceed 48 inches. So, the length can be either 48 inches or lower. Within this limitation, you can get club sizes of any length depending on your height or style of play.
What size ruler do you need for golf club reading?
For this, you need a ruler of 48 inches or greater. You can use a measuring tape. However, the flexibility of the tape can hamper the entire procedure. For best readings use a golf club measuring ruler. Now, if you got the ruler in your hands, we can proceed. Follow these steps one after another: Step 1.
What is the best length for putters?
For putters. Analyzing the posture and wrist-to-floor measurement, 32-35” can be a good length for putters that most golfers will be comfortable with. Longer putters will cause several problems in your gameplay. It will restrict you from being close to the ball and miss targets in most cases.
What happens if you lie your golf club higher than the heel?
Placing the club with its toe higher than the heel will lessen your club length measurement. Number 2: If you do the opposite which means if the heel is higher above the ground than the toe then your club length will increase.
How long was the driver's club in the 1970s?
Manufacturers have invested in research and understanding user psychology to get the correct length of the club. During 1970s-80s, the drivers had 43 inches of length. For 5-woods it was even lesser, just 41 inches. The reason behind the shifts in club length is the mindset of the golfers.
Where is the ruler on a putter?
The ruler method can be used for putters. Instead of the heel, the ruler is placed beside the center of the putter. This means your ruler must be placed along the shaft to the ground. The ruler must be placed behind the club, and the final reading must be taken from the edge of the grip cap.
Is there a standard length of a golf club?
There is no standard length of a club in golf. So, club makers are free to make clubs that they feel are appropriate for a golfer. Here is what Tom Wishon, the founder of Tom Wishon Golf Technology, has to say- “There are no industry-wide standards for any golf club specification in the golf equipment industry.”.
How to measure wrist for golf club?
Step 2. Stand with your hands hanging loosely by your side. Have your assistant measure the distance from where your wrist hinges to the ground, going straight down. This is your wrist-to-floor measurement. Step 3. Use the "Golf Club Measurement Guide" (see Resources).
What is the average size of a golf club for women?
As a result, the standard size of golf club for women is shorter in length and is designed for women that are between 65-inches (5'5") and 69-inches (5'9") tall. For women who are shorter than 5'5", golf manufacturers produce a "petite" golf club that is both shorter and lighter than the standard length club.
How much shorter are ladies golf clubs than men?
Ladies' standard-sized golf clubs run approximately 1-inch shorter than men's clubs.
How to determine the correct length of a women's golf club?
NOTE: Women's clubs are traditionally 1" shorter than men's. To determine the correct length for a woman, simply add one inch to the length suggested in the chart. For example, if the chart suggests shortening a man's club by one inch, a woman's club (already one inch shorter) might not need any length adjustment.
What is flat golf?
Flat: A term used to describe a lie angle in which the toe of any metal wood, iron or putter is lower than standard, or lower than preferred at impact. If the lie angle is too flat, the clubface will point to the right of the leading edge.
How does shaft length affect club speed?
Shaft length plays an important role in club's head speed, path, attack angle and the player's ability to make solid contact. As shaft length increases, clubhead speed also increases. There is a point when the weight of a longer shaft, combined with the awkwardness of controlling the extra length, will result in diminishing clubhead speed. As shaft length increases, it is common for players to deliver the club more from the outside and on a shallower angle of attack. It also becomes more difficult to make solid contact.
What happens if the lie angle is too flat?
If the lie angle is too flat, the clubface will point to the right of the leading edge. There are two important factors to consider when considering the lie angle of an iron. First, lie angle should be fitted dynamically, meaning that the club fitter should examine the lie angle when the club is impacting the ball.
What is an upright golf club?
Upright: A term used to describe a lie angle in which the toe of any metal wood, iron or putter is higher than standard, or higher than preferred at impact. If the lie angle is too upright, the clubface will point to the left of the leading edge.
What is lie angle?
Adjusting the Lie Angle. Lie angle is the vertical orientation of the clubhead. It affects the direction the clubface is pointing, and thus how the ball leaves the clubface. If the lie angle is too upright, the clubface will point to the left of the clubhead's leading edge. If the lie angle is too flat, the clubface will point to the right ...
How does grip size affect golf?
Grip size and texture will affect how the club feels to a player. Most players with large hands prefer oversize grips and the opposite is true for players with small hands. The texture and material of a grip is purely personal preference with no performance implications.
How does a lengthened golf club work?
A longer distance can be achieved with a lengthened club if you have the ability to swing it with the same force and speed that you did with a shorter club . This increases the ball’s velocity upon impact, and you can hit it farther. Flex: The flex of the shaft will be altered. This happens for a few reasons.
Why do you have to swoop on your golf club?
Because the club is longer, you have to swoop on your downward swing, causing the force of your wood – if you’ve hit it correctly – to be applied to the bottom of the ball and send it upwards. A wood without enough length just doesn’t cut it. You’d be sending the ball higher but with almost no distance.
Why are golf clubs made the way they are?
The reason clubs are made the way they are is to gather momentum as you swing down. If your club is too short, you’re going to build momentum while having resistance, meaning you will push too hard against the wind and not just swing naturally. There’s not enough weight to the club.
What happens if you play too long in a golf club?
If the club is too long for you, then you’re spending extra time during ramp up which is the amount of time spent during your initial downswing. You want a balance between your abilities, ramp up, and momentum while cutting through the wind with as little resistance as possible.
When shortening a golf club, do you have to remove the crown?
When you shorten a golf club, you have to remove the crown, and safely disconnect the shaft from the head.
Why did Lars start golfing?
Father of six and long-time golfer, Lars started golfing because of a summer job when he was nineteen, where he caddied for a Virginia state official. From that moment on, he fell in love with the sport, and made it a core staple in his life. Thirty-five years later, with thousands of games under his belt, he’s here to teach you the fundamentals and master techniques of golf, while recommending proper golfing gear and equipment for every step in your journey.
Why is my driver heavier than my wedge?
That’s because the head is a little heavier to account for the extra force it takes to send your ball as far as it goes. During your driver shot, you should send the ball farther than any other point in your round of golf.
