How do you check the drive belt on a golf cart?
To check if the drive belt is too tight, follow these steps: Switch OFF the golf cart’s engine. Reach to where the drive belt is located and use your fingers to press the drive belt between the two clutches. The belt must deflect at least one and a half inches under the pressure of your fingers.
What is the function of the drive belt in a cart?
The primary clutch drives the cart and the belt helps it to rotate the secondary clutch (they are referred to as the drive clutch and the driven clutch respectively). The drive belt, unlike some of the other automotive belts, are very thick.
What is the biggest belt on a golf cart?
The biggest belt on a golf cart is the drive belt. This is the belt that is responsible for the transfer of power between the engine and the gears. Without it, your golf cart wouldn’t be able to move, and when it is damaged, the performance of your golf cart will be negatively impacted. The other belt in a golf cart is the starter belt.
How long does a drive belt last on a golf cart?
Golf cart drive belts are designed to last at least 4 years of normal use or around 90,000 miles. They’re durable and resistant to damage, so you shouldn’t need to replace a golf cart belt very often, particularly if you’ve purchased a new cart.
How do I know what size Go Kart belt I need?
Measuring a Go-Kart BeltStep 1 – Determine Belt Type. The first thing that you'll need to do is to identify which type of drive belt you need for your torque converter. ... Step 2 – Measure Driven Pulley Diameter. ... Step 3 – Measure Center Distance. ... Step 4 – Check Measurement Against the Belt Size Chart.
What size is a golf cart belt?
The golf cart drive belt is the larger (1" to 1 3/16" wide), longer and usually looser belt on gas golf cars. It connects the drive clutch (on the engine) to the driven clutch (on the differential) and transfers the power of the engine to the rear wheels. The belt should be loose and free of cracks or delamination.
How do you measure a CVT belt?
0:451:30PFS Scooter CVT Belts And How To Measure The Length Of A CVT BeltYouTubeStart of suggested clipEnd of suggested clipMeasuring the length of a CVT belt to measure the length of a CVT belt there are cool things you'llMoreMeasuring the length of a CVT belt to measure the length of a CVT belt there are cool things you'll need a belt something to mark the belt with a tape measure and a surface to roll the belt.
What size CVT belt do I need?
2:103:47What size scooter belt do I need - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you have if you have ten inch wheels on a 150 or 125 you're going to need a 743 - 2030. And ofMoreIf you have if you have ten inch wheels on a 150 or 125 you're going to need a 743 - 2030. And of course if you have a 250 cc it's going to be 8:28.
How do you change a belt on a golf cart?
1:195:57Changing the Drive Belt and Starter Generator Belt 2008 EZGO TXTYouTubeStart of suggested clipEnd of suggested clipDrive belt to remove it all you got to do is kind of work it over the edge and then roll. Back.MoreDrive belt to remove it all you got to do is kind of work it over the edge and then roll. Back. Until it pops off that rear driven clutch and then take it right out.
How wide is a Yamaha Golf Cart belt?
1-3/16″ wideBelt size is 1-3/16″ wide x 39″ long.
How do you read a belt size?
Automotive belts start with either 4L (12.5mm wide) or 3L (9.5mm). The number following it is the outside length of the belt in tenths of inches. The inside length of the belt is typically 2" less for a 4L belt, and 1-1/2" less for a 3L belt. An example would be 4L460, which would be 46" long outside, 44" inside.
What do the numbers mean on CVT belt?
CVT belts are measured in 3 dimensions. For example, here is what the numbers of a 669-80-30 belt actually mean: 669 = The Pitch Length of the belt in millimeters. 18 = The Width of the belt in millimeters. 30 = The Angle of the teeth on the interior of the belt.
How do you use a belt measuring tool?
0:033:43How To Measure A Belt - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what you do is just take a standard tape measure. Then you'll come up here on the top side of theMoreSo what you do is just take a standard tape measure. Then you'll come up here on the top side of the belt. And you're going to measure across easiest way to find the width of it.
How do you measure a variator belt?
Measure the upper width of the belt, e.g. 47 mm = profile width 47 mm. Measure the belt thickness, e.g. 13 mm = profile 47 × 13.
How do you measure a variable speed belt?
0:051:08Variable Speed Belts - YouTubeYouTubeStart of suggested clipEnd of suggested clipSome of the critical measurements we will need again as you just marked the belt. And unroll theMoreSome of the critical measurements we will need again as you just marked the belt. And unroll the belt one time on to a tape measure that'll. Give us the outside circumference.
How do you measure a clutch belt?
0:262:04How to measure for a go-kart drive belt. - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow the first measurement we're going to take on this is we're going to measure from the centerlineMoreNow the first measurement we're going to take on this is we're going to measure from the centerline of the crankshaft. To the centerline of the jack shaft. We're going to get that. Reading. Oh we got
Do electric golf carts have drive belts?
The drive belt is one of the most important belts on your EZGO golf cart. It helps to translate engine power into different gears and makes it possible to shift your cart, giving it the get up and go it needs to run. However, there are times when this belt may be loose or damaged and you may want to tighten it.
How does a golf cart clutch work?
0:463:28How a golf cart CVT slip drive clutch works - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the rear drive clutch actually separates it widens causing the belt to drop down into the clutchMoreAnd the rear drive clutch actually separates it widens causing the belt to drop down into the clutch.
What are car belts?
The serpentine belt winds through your engine and carries power to several key components, including the alternator, air conditioning, and power steering pump. In some cars, the serpentine belt is also connected to the water pump. The timing belt, meanwhile, synchronizes the actions of your camshaft and crankshaft.
How Tight Should Go-Kart Belt Be?
When it comes to the fitting, you should always stick with the manufacturer’s recommended sizing. If the center distance of your torque converter can’t be found on the belt chart, ensure that you get the one that is closest to the measurements. In the worst case, a looser belt is better than a belt that is too tight. However, try to ensure a perfect fit.
How to Fix a Go-Kart Belt That Keeps Jerking?
You should immediately check the wear on your go-kart belt. If your belt is not lubricated properly, is too loose or is too worn, it may cause a jerky or even sluggish acceleration.
How many pulleys does a torque converter have?
A torque converter has two pulleys. The pulley that is attached to the crankshaft is called the driver pulley, as it drives the belt through the rotation of the crankshaft. The other pulley that is on the opposite end of the torque converter is called the driven pulley, as it’s driven by the belt. This pulley is connected to the jackshaft.
How to determine torque converter belt type?
Step 1 – Determine Belt Type. The first thing that you’ll need to do is to identify which type of drive belt you need for your torque converter. When it comes to go-kart belts, there are two types. On the one hand, you have symmetrical belts, and on the other hand you have asymmetrical belts.
What is the diameter of a go kart belt?
Now, check in the Pulley 7” column for a center distance of 9 1/4-inches. This should lead you to the belt Comet 20 Series with the part number 203583A. This go-kart belt has an outer diameter of 32.2-inches and a top width of 3/4-inches. Congratulations, that’s it! It’s that simple.
Why does my go kart belt burn?
Burning your go-kart belt is a common occurrence if your belt is too tight or if the backplate is not straight . This causes increased friction and will heavily increase the wear on your go-kart belt. This reduces the belt’s lifespan and your torque converter. When this happens, your belt will turn hot.
What type of belts do you need for a go kart?
On the one hand, you have symmetrical belts, and on the other hand you have asymmetrical belts. The type of belt that you require for your go-kart depends on the type of torque converter you have. If you look at the cross section of a belt, symmetrical drive belts are evenly angled at 15 degrees.
What is the outer circumference of a go kart belt?
The outer circumference (shortened to “Outer Cirum.” In the go-kart belt size chart) refers to the circumference of the torque converter belt . The circumference is measured from the outside of the belt, not the inside. As you can see in the belt size chart, Comet offers belts with an outer circumference size from as short as 22″ to as long as about 45″+.
What is a go kart belt?
Go-kart belts come in different types, symmetric and asymmetric. This refers to the cross section design of the torque converter belt. For example, if you look at the go-kart belt size chart above and see a belt that has a asymmetric design, it means that from a cross sectional view, the outer borders are angled differently.
What is the top angle of a go kart belt?
Symmetric go-kart belts have a top angle of 15 degree on both sides. An asymmetric belt has an 18 degree angle on one side and a 2.5 degree angle on the other. The belt type depends on your torque converter model and design. For further reference, see the illustration below. 20 Series: Symmetric.
What is the diameter of a pulley?
Comet go-kart belts support driving pulley diameters of 6”, 7”, 7.5” and 8.5”.
How long is a comet belt?
As you can see in the belt size chart, Comet offers belts with an outer circumference size from as short as 22″ to as long as about 45″+.
What is the diameter of a 203578A belt?
For example, the belt with the part number 203578A refers to a Comet 20 Series go-kart belt for a 6” rear pulley diameter, a center-to-center distance between 6 5/8-inches to 6 11/16-inches, an outer circumference of 27-inches and a top width of 3/4-inches. The part number is also printed on the outside of the belt in white color.
How many belts are in a comet 20?
The part number indicates the different variants of the series. For example, the Comet 20 Series go-kart belt has 11 different belts, each with its respective dimensions for different torque converters.
How Tight Should the Drive Belt be in a Club Car Golf Cart?
The rule of thumb is that the drive belt must neither be too tight nor too loose. If the drive belt in a Club Car golf cart is loose then you won’t get the required speed while driving. If the belt is too tight then your starter will be under strain and this should be avoided.
Why is My Club Car Drive Belt Too Loose?
The drive belt on your Club Car golf cart may be loose if the belt you have fitted is too large for the golf cart . Some belts can overheat with overuse, or even stretch after a few months and become too loose.
How to tell if golf cart starter belt is tight?
The best test to see if a golf cart drive belt has the correct tension is to use the Finger Test. Press the drive belt with one finger at its center between the two clutches. It should sag by just an inch and a half.
What is slipping drive belt on 1985 golf cart?
The 1985 Club Car golf cart is no exception to this. The way the clutches are designed for these golf carts is that there is the drive belt connecting the two, the driven and the drive clutches. It has to be of the appropriate size and tension for it to provide a smooth ride.
Why does my golf cart drive belt slip?
The reason for the drive belt slipping could be that it is of a larger/longer size and therefore loose. You may start feeling the slippage after driving for a while. This is because the belt gets heated up after the golf cart runs for some time and loosens further .
What is the primary function of a golf cart drive belt?
To primary function of a golf cart drive belt is to connect the primary clutch and the secondary clutch. The primary clutch drives the cart and the belt helps it to rotate the secondary clutch (they are referred to as the drive clutch and the driven clutch respectively). The drive belt, unlike some of the other automotive belts, are very thick.
How to tell if golf cart drive belt is damaged?
Make sure that the golf cart’s engine is turned OFF. An inspection can reveal if the drive belt is damaged. Check if it is too tight or loose. In case of a damaged, tight, or loose belt order a new one. Replacing the drive belt is not a very difficult task.