
How to measure the length of your driver shaft:
- Keep the golf club in the playing position such that the center of the sole is in contact with the ground.
- Position a 48” golf club ruler behind the golf club making sure the ruler tip touches the ground by the heel of the club. ...
- Measure the distance from the edge of the grip cap to the heel.
Full Answer
How to shorten the length of a golf club?
Aug 24, 2021 · How to Measure a Golf Club Shaft Length? Place the golf club on a flat surface with its toe pointed up. Now, lay a protractor against the clubhead on the same surface. Check the clubhead’s sole position, and it must be at a 60-degree angle to the flat ... Imagine a line that follows the club’s sole ...
How do you shorten a golf club shaft?
Jul 04, 2019 · The next step to measure a golf club is to place the golf club. This involves having the driver placed upright and in a proper position in the same manner that you would for a normal tee shot. The bottom of the driver will be expected to be flat against the floor while measuring the length of the driver shaft.
What is the standard length for a golf club?
The following steps are part of the second method of measuring the right golf club length for you. In this method, you have to know 1) your own size and 2) the distance between your wrist and the floor. Step 1. First, measure your height. To do so, stand straight on a plane surface. Your arms should be relaxed and hanging on the side.
How to size golf clubs for better performance?
Here’s how to go about it to get the correct golf club length for your height… 1. Measure Your Overall Height (i.e. “static” fitting) The measurement of your overall height is the first, most basic step of the process. But please bear in mind that this is not enough for deciding the accurate length of your golf club shaft.

How do you determine golf club shaft length?
Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").
How long should my golf shaft be for my height?
1. Measure Your Overall Height (i.e. “static” fitting)OVERALL HEIGHTGOLF CLUB LENGTH ADJUSTMENTS5'7″ to 6'1″standard length in inches6'1″ to 6'2″plus 1/4″6'2″ to 6'4″plus 1/2″6'4″ to 6'6″plus 1″7 more rows
How long should golf clubs be for 6 2?
Understanding Golf Club Length – How It Works and What Works for You?HeightWrist-To-Floor MeasurementLength of Golf Club5'4″ – 5'7″32 inches – 34 inchesSubtract 1/4 inch5'7″ – 6'1″34 inches – 37 inchesStandard size6'1″ – 6'2″37 inches – 38.5 inchesAdd 1/4 inch6'2″ – 6'4″38.5 inches – 40 inchesAdd 1/2 inch1 more row
What are standard golf club lengths?
Standard Club LengthClubMen GraphitLady SteelWood 5#4240,5Wood 7#, 9# usw.4139,5Iron 3#39,538Iron 4#3937,528 more rows
Where should the ruler be when measuring golf driver shaft length?
Thirdly, you will place the straight edge ruler against the upright golf driver. The ruler should be vertical to the ground when you measure driver shaft length and the ruler should touch the top of the golf driver.
Why is it important to measure driver shaft length?
Having the right length for your golf shafts is so important because it helps with controlling the distance of golf shots. Additionally, a correctly fitting shaft length will help to develop consistency ...
How long is a golf club?
What Is The Length Of A Golf Club? For a driver the length can be up to 48 inches. However, the typical length would be around 45.5 inches. Other golf clubs in the bag are shorter than the driver and go down to around 35 inches for a lob wedge and 32 inches for a putter.
Why does height matter in golf?
Does Height Matter For Golf Clubs? Height matters for golf clubs because it impacts your swing and your positioning. Shorter players require shorter clubs due to their shorter arms. The longer your arms, the longer the clubs you will need – so a taller player will need proportionately longer clubs as well.
How to measure golf club length?
Important Information before we know “How to Measure the Golf Club Length.” 1 The standard irons designed for women are usually an inch shorter than the standard irons designed for men. 2 The United States Golf Agency (USGA) limits the maximum length of golf clubs. 3 The minimum length for all the golf clubs, including putters, is 18 inches. 4 The maximum length for all golf clubs except the putters is 48 inches. 5 The putters do not have the maximum length limit. 6 The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length. 7 A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three.
How long should a golf shaft be?
The chart recommends + 0.25 inches. It means that your golf shaft has to be made 0.25 inches longer than the standard length. Similarly, if your height is 66“ and the wrist to floor distance is 31.5 inches, the chart recommends – 0.75 inches.
What does a longer shaft mean?
The longer shaft does mean longer golf club length. A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three. Therefore we must know about the standard length of the woods, and irons. Let’s first discuss the standard lengths of woods.
How to measure club size with LDA?
The following are steps of measuring the club size using the LDA method. Step 1. First, put the shaft against the wall so that the toe of the driver is placed on the ground. Step 2.
What is the minimum length of a golf club?
The minimum length for all the golf clubs, including putters, is 18 inches. The maximum length for all golf clubs except the putters is 48 inches. The putters do not have the maximum length limit. The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length.
Where is the shaft of a putter located?
It is because the shaft of the putter is mostly installed in the heel. The shaft placement is either near the heel or in the center of the club head. Therefore, it is essential to measure the putter differently. The method of measuring the length of a putter is described in the following steps. Step 1.
What is the USGA method?
Method 5: The United States Golf Association (USGA) Method. The USGA method is part of the rule book’s method: “Rules of Golf.”. In it, an apparatus containing an angle iron is used. The angle iron forms a 60-degree angle from the horizontal, and it is also used to stop /hold the iron.
Why is length important in golf?
Length itself is very important as it helps control the distance you hit the ball as well as develop consistency is the length is fitted correctly.
Where is the final length measured?
The final length is measured at the edge of the grip cap (and not the very top). This method is used in all cases except putters that the shaft is not located at the heel. In this method, it is critical that the lie of the club be positioned correctly. If the club is placed with the toe raised higher off of the ground than the heel, ...
Why is the ruler not placed in line with the shaft?
Because the shaft is ahead of the face of the putter, the ruler is not placed in-line with the shaft, rather along the back side of the shaft like an iron would be measured. The difference being that the ruler would touch the ground somewhere other than behind the heel of the club.
What is the USGA method?
USGA Method. The United States Golf Association (USGA) has a method outlined in the Rules of Golf. The USGA uses an apparatus that has a piece of angle iron as a stop that forms at a 60 angle from the horizontal.
How long is the LDA?
Depending upon the lie of the driver can also contribute to the final length. The LDA has a 50” length limit for sanctioned long drive competitions.
How important is shaft length in golf clubs?
The length of the shaft in your driver is extremely important, as it plays a big role in determining how fast you can swing the club, the club’s path and angle of attack and, ultimately, how well you’re able to make center-face contact.
Why are golf clubs not fitting?
Having golf clubs that are not properly fitted for length can be a major contributor to inconsistent performance. For the same reasons that someone who is 6’ 5” wouldn’t walk into a men’s clothing store and buy a suit off the rack, golfers need to make sure that the golf clubs that they buy are suited to their body type and size.
What does a professional club fitter do?
Professional club fitters take a number of factors into consideration as they assess the club specification requirements of each golfer. Specifically as it pertains to club length, they will look at a couple of static measurements, and they will also conduct a “dynamic” fitting assessment:
Why is wrist to floor measurement important?
The reason it is so pervasive in club fitting is because it adds an additional layer to the measurement, which improves its accuracy.
Why is playing with clubs too short bad?
Playing with clubs that are either too short or too long can cause a golfer to change their stance or swing in ways that could negatively affect the outcome. It can lead to subconscious swing compensations that can result in inconsistent ball striking.
What happens if a golfer has a short club?
If a player has clubs that are too short, they will usually bend over too much from the waist in their address position. Conversely, clubs that are too long will require the player to stand too erect. Both of these subconscious adjustments could potentially make their swing motion less effective than it should be.
What is the most important factor in creating distance with the driver?
However, studies have shown that the single most important factor in creating distance with the driver is not the length of the shaft, but rather the golfer’s ability to hit the ball on the sweet spot of the club face. So, while shaft length is important in generating distance, there is a point of “diminishing returns.”.
How does a lengthened golf club work?
A longer distance can be achieved with a lengthened club if you have the ability to swing it with the same force and speed that you did with a shorter club . This increases the ball’s velocity upon impact, and you can hit it farther. Flex: The flex of the shaft will be altered. This happens for a few reasons.
When shortening a golf club, do you have to remove the crown?
When you shorten a golf club, you have to remove the crown, and safely disconnect the shaft from the head.
Why are golf clubs made the way they are?
The reason clubs are made the way they are is to gather momentum as you swing down. If your club is too short, you’re going to build momentum while having resistance, meaning you will push too hard against the wind and not just swing naturally. There’s not enough weight to the club.
Why do you have to swoop on your golf club?
Because the club is longer, you have to swoop on your downward swing, causing the force of your wood – if you’ve hit it correctly – to be applied to the bottom of the ball and send it upwards. A wood without enough length just doesn’t cut it. You’d be sending the ball higher but with almost no distance.
What happens if you play too long in a golf club?
If the club is too long for you, then you’re spending extra time during ramp up which is the amount of time spent during your initial downswing. You want a balance between your abilities, ramp up, and momentum while cutting through the wind with as little resistance as possible.
Why did Lars start golfing?
Father of six and long-time golfer, Lars started golfing because of a summer job when he was nineteen, where he caddied for a Virginia state official. From that moment on, he fell in love with the sport, and made it a core staple in his life. Thirty-five years later, with thousands of games under his belt, he’s here to teach you the fundamentals and master techniques of golf, while recommending proper golfing gear and equipment for every step in your journey.
Why is my driver heavier than my wedge?
That’s because the head is a little heavier to account for the extra force it takes to send your ball as far as it goes. During your driver shot, you should send the ball farther than any other point in your round of golf.
How to measure wrist for golf club?
Step 2. Stand with your hands hanging loosely by your side. Have your assistant measure the distance from where your wrist hinges to the ground, going straight down. This is your wrist-to-floor measurement. Step 3. Use the "Golf Club Measurement Guide" (see Resources).
How much shorter are ladies golf clubs than men?
Ladies' standard-sized golf clubs run approximately 1-inch shorter than men's clubs.
What is the average size of a golf club for women?
As a result, the standard size of golf club for women is shorter in length and is designed for women that are between 65-inches (5'5") and 69-inches (5'9") tall. For women who are shorter than 5'5", golf manufacturers produce a "petite" golf club that is both shorter and lighter than the standard length club.
