
- Obtain the proper measuring tool. You will need at least a 48-inch ruler/measuring stick/tape measure in order to measure the length of your golf clubs.
- Position the golf club. The face of the golf club should be laying flat on a flat surface so that the face is parallel to the ground.
- Place the measuring stick directly behind the golf club. ...
What is the standard length for a golf club?
What Is the Standard Length of a Golf Club?
- Rules of Golf. The rules regarding golf club construction are found in Appendix II of the Rules of Golf, published by the United States Golf Association.
- Graphite Vs. Steel. ...
- Drivers. In a 2010 “Golf Digest” article, PGA Tour player Bubba Watson said the typical off-the-rack driver is 45.5 inches long.
- Irons and Hybrids. ...
Should all my golf clubs be the same length?
Some sets are made with all clubs the same length as the eight or six iron, but the seven iron is the most popular. You will still need to make sure you get your clubs fitted adequately for you; in fact, it is more important with the one length than with variable length. There are lots of reasons to switch to a one-length iron.
What length golf clubs do you need?
- 3-wood
- 4- and 5-hybrids
- 6- to 9-irons
- Pitching wedge
- Sand wedge
- Driver
- Putter
How to shorten the length of a golf club?
- Remove The Grip
- Remove The Grip Tape
- Measure Twice and Cut Once
- Make The Cut
- File Off Any Lose Edges On The Cut Line
- Place A New Grip On The Club
- Add Weights to balance any change in swing weight
- Go Try Out Your New Shorter Length Club

How do I determine the length of my golf clubs?
To get an accurate measurement of club length. Measure the club at the angle that the bottom of the clubhead lies in its playing position on the floor. Measure from the floor to the end of the Grip. Before we use the chart below, it is important to know your height and your wrist-to-floor measurement.
How long should my golf clubs be for my height?
Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").
How do you measure club length at home?
0:522:42Measuring Golf Club Length Video Blog From Hireko Golf Part 1YouTubeStart of suggested clipEnd of suggested clipThe club needs be positioned. With the center of the sole touching the ground in your ruler. Back byMoreThe club needs be positioned. With the center of the sole touching the ground in your ruler. Back by the heel touching the ground. This is the correct way to measure. If the club is too upright.
What is the standard length of a golf club?
Standard Club LengthClubMen GraphitLady SteelWood 1#4442,5Wood 3#4341,5Wood 5#4240,5Wood 7#, 9# usw.4139,528 more rows
How do you know if your golf clubs are too short?
6 Signs Your Golf Clubs are Too ShortYou need to bend too much at the waist before swinging.You also have to bend your knees pre-swing.You keep hitting the ball with the golf club's heel.The swing path is in to out.The tempo is too quick.The ball tends to veer off to the right.
What is the standard length of a 7 iron?
The standard length of a 7 iron is 37 inches on steel and 37.5 inches with the structure made of graphite.
What is the standard length of men's golf irons?
For men, the standard length of a 7-iron with a steel shaft is 37 inches and if it has a graphite shaft, the standard length is 37.5 inches. A graphite golf club for women has a length of 36.5 inches while a golf club made of steel features a standard length of 36 inches.
How does ping measure club length?
Understand that Ping uses your height and wrist-to-floor measurement to determine the shaft length for your iron fitting. Remember that the taller you are, the longer your shafts should be, and the shorter you are, the shorter your shafts should be.
How do you measure your wrist and floor for golf clubs?
Stand on a solid, flat floor with your wrists hanging in a relaxed fashion by your sides. Wear street shoes without heels. From this position get someone else to take a measurement from the floor up to the crease on the inside of your wrist. This is the excepted, correct method for how to measure wrist to floor.
What is the standard length of a 56 degree wedge?
The average length of 56 degree wedge golf club is 35.25 inches (89.54 cm). This is about the same length as a sand wedge. Women's wedges are designed to be an inch shorter than men's wedges. Men's steel 56 degree wedge has a length of 35.25 inches (89.54cm), while a graphite wedge is sized at 35.75 inches (90.81cm).
How long should irons be for height?
How Long Should Your Golf Clubs Be For Your Height?Your HeightLength Adjustment (From Standard)Recommended Adjustment (From Standard)6'8″+Add 2 InchAdd 1 Inch6'6″-6'8″Add 1.5 InchAdd 0.5 Inches6'4″-6'6″Add 1 InchStandard6'2″-6'4″Add 0.5 InchDecrease 0.5 Inch5 more rows
How long should my driver shaft be for my height?
Driver Shaft Length Based Solely on HeightHeight (feet/inches)Driver Shaft Length5'4″-5'7″45.5″5'2″-5'4″45″5'0″-5'2″44.5″4'10”-5'0″44″6 more rows•May 9, 2021
How to measure golf club length?
Important Information before we know “How to Measure the Golf Club Length.” 1 The standard irons designed for women are usually an inch shorter than the standard irons designed for men. 2 The United States Golf Agency (USGA) limits the maximum length of golf clubs. 3 The minimum length for all the golf clubs, including putters, is 18 inches. 4 The maximum length for all golf clubs except the putters is 48 inches. 5 The putters do not have the maximum length limit. 6 The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length. 7 A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three.
What is the minimum length of a golf club?
The minimum length for all the golf clubs, including putters, is 18 inches. The maximum length for all golf clubs except the putters is 48 inches. The putters do not have the maximum length limit. The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length.
How long should a golf shaft be?
The chart recommends + 0.25 inches. It means that your golf shaft has to be made 0.25 inches longer than the standard length. Similarly, if your height is 66“ and the wrist to floor distance is 31.5 inches, the chart recommends – 0.75 inches.
What does a longer shaft mean?
The longer shaft does mean longer golf club length. A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three. Therefore we must know about the standard length of the woods, and irons. Let’s first discuss the standard lengths of woods.
How to measure club size with LDA?
The following are steps of measuring the club size using the LDA method. Step 1. First, put the shaft against the wall so that the toe of the driver is placed on the ground. Step 2.
Where is the shaft of a putter located?
It is because the shaft of the putter is mostly installed in the heel. The shaft placement is either near the heel or in the center of the club head. Therefore, it is essential to measure the putter differently. The method of measuring the length of a putter is described in the following steps. Step 1.
What is the USGA method?
Method 5: The United States Golf Association (USGA) Method. The USGA method is part of the rule book’s method: “Rules of Golf.”. In it, an apparatus containing an angle iron is used. The angle iron forms a 60-degree angle from the horizontal, and it is also used to stop /hold the iron.
Why is length important in golf?
Length itself is very important as it helps control the distance you hit the ball as well as develop consistency is the length is fitted correctly.
Where is the final length measured?
The final length is measured at the edge of the grip cap (and not the very top). This method is used in all cases except putters that the shaft is not located at the heel. In this method, it is critical that the lie of the club be positioned correctly. If the club is placed with the toe raised higher off of the ground than the heel, ...
Why is the ruler not placed in line with the shaft?
Because the shaft is ahead of the face of the putter, the ruler is not placed in-line with the shaft, rather along the back side of the shaft like an iron would be measured. The difference being that the ruler would touch the ground somewhere other than behind the heel of the club.
What is the USGA method?
USGA Method. The United States Golf Association (USGA) has a method outlined in the Rules of Golf. The USGA uses an apparatus that has a piece of angle iron as a stop that forms at a 60 angle from the horizontal.
How long is the LDA?
Depending upon the lie of the driver can also contribute to the final length. The LDA has a 50” length limit for sanctioned long drive competitions.
What is custom measurement golf?
Custom measurement is designed to equip you with golf clubs that suit your needs and your game type. These measurements are necessary for providing the appropriate golf clubs. The steps below outline steps for you to measure and acquire custom golf clubs from a golf store.
Why are handicaps important?
Handicaps have proven to be useful in many ways. The data helps determine the best measurements for a custom-made golf club. Amateur players with a high handicap have a great chance of improving their game using custom fit golf clubs.
What happens if you play a golf club too long?
Your posture will be affected. If the club is too long, you will tend to be more upright. When the club is too short, you will tend to bend forward more than you should . You should therefore pick a club that is custom made for your type of play.
Why do you not pick a red coat?
For instance, you do not just pick a red coat because you love the colour. There are many factors that you need to consider, such as the material used. Customizing a golf club with the correct length for your height will result in an outstanding performance on the course.
What to do if you don't have a handicap?
If you don’t have a handicap, clearly explain to the fitters your skill level, as this can go a long way in finding something that fits you perfectly. Remember, the ultimate goal is to find a golf club that can change your game for the better.
Why do you need to fit a golf club?
A custom-fit golf club will improve your game and performance on the scoreboard. Therefore you should fit your golf club appropriately per your type of play. As a golfer, you should make sure that your golf clubs are fitted to the appropriate lengths.
How tall is a man?
The average height for a human being varies from man to woman. A man’s average height stands at approximately 5’10” while that of their female counterparts stands at 5’5″. With these figures in mind, manufacturers design clubs with a 1″ difference in length between men and women.
How to measure a golf club?
For putters, you want to measure from the sole of the putter to the end of the grip. So, to do this, you need to follow the steps we outlie below. 1 Lay your putter flat on the ground 2 Begin with a tape measure at the top of the grip 3 Measure straight along the shaft, continuing through any offset or hosel change 4 Once you reach the bottom of the club, still going along the direction of the shaft, that is the length of your putter
How to measure golf club heel angle?
1. Lay the club flat so that the toe of the club faces directly up . 2. Make sure that the ground and middle of the club are at a 60-degree angle (club will sit this way if toe is directly up. 3. Measure from top of grip to spot where heel of club would intersect with the ground (60-degree angle coming in) Measuring these clubs has a bit more ...
How to shorten a golf club?
When you need to shorten a golf club, you can keep the same shaft by physically cutting it. This is not a complicated process, but one that requires precision. First off, the club needs the grip removed. You’ll need a new one regardless so don’t bother trying to preserve it. After that the shaft is cut and regripped.
How to measure a putter shaft?
So, to do this, you need to follow the steps we outlie below. Lay your putter flat on the ground. Begin with a tape measure at the top of the grip. Measure straight along the s haft, continuing through any offset or hosel change.
How long do golf clubs have to be?
According to the USGA, golf clubs need to be within a certain length. All clubs (minus putters) must be at least 18 inches long, and no more than 48 inches. You should not have trouble meeting the minimum length or the longest length.
Can you put a putter straight up?
Some people like to be straight up while putting, others prefer a bit hunched over. As long as your eyes are over the ball and the putter sits flat on the ground without the toe up in the air as you make your stroke, any length is fine. For putters, you want to measure from the sole of the putter to the end of the grip.
Do you need to buy a new shaft for a golf club?
All good-quality golf clubs can be re-shafted. You do not need to buy an entire new club if you need a new shaft. This luxury saves on expense, especially when it is only one club that needs replacing.
Why measure golf clubs?
You may also need to measure the clubs to ensure that they are regulation length for an upcoming tournament or event. It is important to know the proper way to measure the entire length of a golf club.
Where to place measuring stick on golf club?
Place the measuring stick directly behind the golf club . The stick should make contact with the shaft of the club and be placed on the ground right at the heel of the golf club you are measuring. The numbers on the stick should be pointed toward you so you can easily obtain a reading.
How to hold a golf club steady?
The face of the golf club should be laying flat on a flat surface so that the face is parallel to the ground. Then, place your hand on the top of the club to hold it steady.
Different Method to Measure the Length of Golf Club
Selecting the correct length of golf club will improve your golf game. It will help those people who are struggling to correct their swing.
Final Thought
In order to measure the golf club length is all depends on your preferences. As the standard golf club length also does not affect your physical health and improves your golf game practice with the passage of time.
How to measure wrist for golf club?
Step 2. Stand with your hands hanging loosely by your side. Have your assistant measure the distance from where your wrist hinges to the ground, going straight down. This is your wrist-to-floor measurement. Step 3. Use the "Golf Club Measurement Guide" (see Resources).
What is the average size of a golf club for women?
As a result, the standard size of golf club for women is shorter in length and is designed for women that are between 65-inches (5'5") and 69-inches (5'9") tall. For women who are shorter than 5'5", golf manufacturers produce a "petite" golf club that is both shorter and lighter than the standard length club.
How much shorter are ladies golf clubs than men?
Ladies' standard-sized golf clubs run approximately 1-inch shorter than men's clubs.
