
Measuring Golf Club Length Download Article
- Lay your club horizontally on a flat surface. You’ll get a more accurate measurement if you measure your club while...
- Position the sole of the club at a 60-degree angle. The sole of the club is the bottom edge that rests on the ground...
- Measure drivers and irons from the end of the grip to the heel of the club. Use a...
How do you measure a golf club?
Length and Height Measurement for Custom Golf Clubs
- Height measurement There are aspects in height measurement that need consideration. ...
- Swinging a standard golf club This step is crucial and needs the utmost seriousness if you need your custom golf club. ...
- Presenting your handicap
How to size golf clubs for better performance?
- Swing the clubs Swinging a standard-length club is an essential step in fitting golf clubs. ...
- Apply tape to the bottom of your clubs This step determines where your club will make contact with the ground. ...
- Identify your handicap Finally, identifying your handicap will allow you to match with the right club type. ...
What is the length of a 5 iron golf club?
There are no specific industry standards for golf club length, but different manufacturers have differing lengths for clubs. A 5-iron from a particular brand is 37.75 inches, others 38 inches or even 38.5 inches long. We cannot stress enough, the importance of a golf club’s length and its effect on your performance.
How do I get measured for golf clubs?
- Take some tape and cover the grip from the tip to the butt.
- Now, make several markings on the tape at a distance of half an inch from each other.
- Step out to the golf range and start hitting your shots from the different lengths that you have marked. ...
- Based on this, you may want to adjust your sand wedge and other golf clubs. ...

How long should golf irons be for my height?
1. Measure Your Overall Height (i.e. “static” fitting)OVERALL HEIGHTGOLF CLUB LENGTH ADJUSTMENTS5'7″ to 6'1″standard length in inches6'1″ to 6'2″plus 1/4″6'2″ to 6'4″plus 1/2″6'4″ to 6'6″plus 1″7 more rows
How do you determine Golf Club length?
To get an accurate measurement of club length. Measure the club at the angle that the bottom of the clubhead lies in its playing position on the floor. Measure from the floor to the end of the Grip. Before we use the chart below, it is important to know your height and your wrist-to-floor measurement.
How do you know if irons are standard length?
Standard Length for Irons This standard measurement increases 1/2 inch for each consecutive number iron. For example, standard length for a steel 2 iron is 39 inches; a 3 iron is 38.5 inches; a 4 iron is 38 inches and so on to the steel 9 iron with the standard length of 35.5 inches.
How do you measure yourself for irons?
3:0615:40ARE MY CLUBS THE RIGHT LENGTH? FIND THE CORRECT GOLF ...YouTubeStart of suggested clipEnd of suggested clipStand in normal standing upright posture with your arms at your sides. And you're just going to takeMoreStand in normal standing upright posture with your arms at your sides. And you're just going to take a ruler just a standard yardstick. And you're going to measure.
What is the length of a standard 5 iron?
Standard Club LengthClubMen GraphitLady SteelWood 7#, 9# usw.4139,5Iron 3#39,538Iron 4#3937,5Iron 5#38,53728 more rows
What is standard club length?
All clubs, including putters, must at least 18 inches long. Putters with straight shafts are measured from the top of the grip to the sole, directly down the shaft.
What length should my 7 iron be?
What is the Standard Length of a 7 Iron? The standard length of a 7 iron is 37 inches on steel and 37.5 inches with the structure made of graphite. For women, the standard length of a graphite golf club is 36.5 inches, and for steel, it is 36 inches. The standard lengths are set from the shaft weights of the golf club.
What is the standard length of a 56 degree wedge?
The average length of 56 degree wedge golf club is 35.25 inches (89.54 cm). This is about the same length as a sand wedge. Women's wedges are designed to be an inch shorter than men's wedges. Men's steel 56 degree wedge has a length of 35.25 inches (89.54cm), while a graphite wedge is sized at 35.75 inches (90.81cm).
How do you get fitted for irons?
Get a basic club consultation from an expert.Make the proper alterations to your current set, or purchase a budget-friendly starter set (anywhere from 1-14 clubs)Research instructors in your area and pick one.Communicate with your instructor about your equipment.Work hard to improve your swing.More items...•
How do you fit yourself to a club?
3:069:51HOW TO CUSTOM FIT YOUR OWN CLUBS - YouTubeYouTubeStart of suggested clipEnd of suggested clipYeah use the logo on the ball. Some that that's the best way to do it yeah just as you would markMoreYeah use the logo on the ball. Some that that's the best way to do it yeah just as you would mark your golf ball up to when you play yes okay and then what we're going to do is we're going to strike.
How to measure golf club?
To measure a golf club, start by laying it on a flat, horizontal surface, like a table or countertop . Then, turn the bottom of the club head so it's at a 60-degree angle to the surface you're measuring the club on. Finally, use a tape measure to measure from the end of the grip to the point where the bottom of the club head meets the flat surface. ...
How to measure club length?
Calibrate the club length measuring apparatus. Turn on the machine and move the grip support assembly to the left until it reaches the end of the apparatus. Put the calibration rod into the machine, resting the right end of the rod against the 60-degree sole plate of the clubhead support.
How to rock a golf club back and forth?
Ensure the clubhead rests against the clubhead support, with the sole touching the 60-degree sole plate. The grip should rest in the grip support. Gently rock the club back and forth to be sure it’s not being constrained and can move naturally.
Where is the sole on a golf club?
The sole is the bottom of the club head. You may need to rest the sole against a plate to ensure it sits at the proper angle. Measure from the end of the grip to the end of the sole. Use a tape measure to find the length in inches between the end of the grip and the farthest point that the sole contacts the horizontal surface.
Which plane should golf clubs be measured on?
Clubs should be measured on a horizontal, rather than vertical, plane to get the most accurate results. ...
How to read scale on a scuba diver?
Slide the grip support until it touches the grip, then read the scale. Move the grip support to the right until the butt plate is gently touching the end of the grip. Step back from the scale and read the digital value. ...
Why is length important in golf?
Length itself is very important as it helps control the distance you hit the ball as well as develop consistency is the length is fitted correctly.
Where is the final length measured?
The final length is measured at the edge of the grip cap (and not the very top). This method is used in all cases except putters that the shaft is not located at the heel. In this method, it is critical that the lie of the club be positioned correctly. If the club is placed with the toe raised higher off of the ground than the heel, ...
Why is the ruler not placed in line with the shaft?
Because the shaft is ahead of the face of the putter, the ruler is not placed in-line with the shaft, rather along the back side of the shaft like an iron would be measured. The difference being that the ruler would touch the ground somewhere other than behind the heel of the club.
What is the USGA method?
USGA Method. The United States Golf Association (USGA) has a method outlined in the Rules of Golf. The USGA uses an apparatus that has a piece of angle iron as a stop that forms at a 60 angle from the horizontal.
Why Is Choosing the Right Club Length Crucial?
There are several reasons why you should measure your golf club length. For starters, if you play with a club that’s too long or too short, you could end up changing your swing or stance in a way that could impact the outcome negatively. It can also result in inconsistent ball striking when you subconsciously make compensations for your swing.
Components of Club Length
When it comes to choosing the best driver and irons, there are several factors that you should consider. Here’s a quick overview of the components of club length.
Methods to Measure Club Length
Here’s an interesting fact according to the Telegraph Trusted Source The secret to mastering golf: play with your other hand Scientists say swapping hands boosts swing control and accuracy, with technique used by top players such as Jordan Spieth and Phil Mickelson www.telegraph.co.uk ; playing with your other hand helps you to master golf.
Ideal Club Length Chart
There’s no standard length of golf clubs which gives clubmakers the freedom to make golf clubs that they assume would be appropriate. You should, however, note that while there is no ideal club length, the USGA has placed a limitation on the maximum length; 48 inches.
Final Thoughts
To sum it up on how to measure golf club length, the ideal length varies based on the player’s height. We have highlighted 2 simple methods that you can use to measure your ideal length, but if for a more thorough fitting, we recommend that you contact a professional.
What size ruler do you need for golf club reading?
For this, you need a ruler of 48 inches or greater. You can use a measuring tape. However, the flexibility of the tape can hamper the entire procedure. For best readings use a golf club measuring ruler. Now, if you got the ruler in your hands, we can proceed. Follow these steps one after another: Step 1.
How long should a golf club be?
According to USGA the length of a golf club should not exceed 48 inches. So, the length can be either 48 inches or lower. Within this limitation, you can get club sizes of any length depending on your height or style of play.
What is the best length for putters?
For putters. Analyzing the posture and wrist-to-floor measurement, 32-35” can be a good length for putters that most golfers will be comfortable with. Longer putters will cause several problems in your gameplay. It will restrict you from being close to the ball and miss targets in most cases.
What happens if you lie your golf club higher than the heel?
Placing the club with its toe higher than the heel will lessen your club length measurement. Number 2: If you do the opposite which means if the heel is higher above the ground than the toe then your club length will increase.
How long was the driver's club in the 1970s?
Manufacturers have invested in research and understanding user psychology to get the correct length of the club. During 1970s-80s, the drivers had 43 inches of length. For 5-woods it was even lesser, just 41 inches. The reason behind the shifts in club length is the mindset of the golfers.
Where is the ruler on a putter?
The ruler method can be used for putters. Instead of the heel, the ruler is placed beside the center of the putter. This means your ruler must be placed along the shaft to the ground. The ruler must be placed behind the club, and the final reading must be taken from the edge of the grip cap.
Is there a standard length of a golf club?
There is no standard length of a club in golf. So, club makers are free to make clubs that they feel are appropriate for a golfer. Here is what Tom Wishon, the founder of Tom Wishon Golf Technology, has to say- “There are no industry-wide standards for any golf club specification in the golf equipment industry.”.
What is custom measurement golf?
Custom measurement is designed to equip you with golf clubs that suit your needs and your game type. These measurements are necessary for providing the appropriate golf clubs. The steps below outline steps for you to measure and acquire custom golf clubs from a golf store.
Why do you need to fit a golf club?
A custom-fit golf club will improve your game and performance on the scoreboard. Therefore you should fit your golf club appropriately per your type of play. As a golfer, you should make sure that your golf clubs are fitted to the appropriate lengths.
What happens if you play a golf club too long?
Your posture will be affected. If the club is too long, you will tend to be more upright. When the club is too short, you will tend to bend forward more than you should . You should therefore pick a club that is custom made for your type of play.
How tall is a man?
The average height for a human being varies from man to woman. A man’s average height stands at approximately 5’10” while that of their female counterparts stands at 5’5″. With these figures in mind, manufacturers design clubs with a 1″ difference in length between men and women.
Can a golf fitter ask you to swing a golf club?
The fitter can do more to make the measurements even better. In step two above, we note that the fitter can ask you to swing a standard golf club to understand your posture and how you swing the club. The measurements are necessary for coming up with the correct plus or minus adjustments.
How does a lengthened golf club work?
A longer distance can be achieved with a lengthened club if you have the ability to swing it with the same force and speed that you did with a shorter club . This increases the ball’s velocity upon impact, and you can hit it farther. Flex: The flex of the shaft will be altered. This happens for a few reasons.
Why are golf clubs made the way they are?
The reason clubs are made the way they are is to gather momentum as you swing down. If your club is too short, you’re going to build momentum while having resistance, meaning you will push too hard against the wind and not just swing naturally. There’s not enough weight to the club.
Why do you have to swoop on your golf club?
Because the club is longer, you have to swoop on your downward swing, causing the force of your wood – if you’ve hit it correctly – to be applied to the bottom of the ball and send it upwards. A wood without enough length just doesn’t cut it. You’d be sending the ball higher but with almost no distance.
What happens if you play too long in a golf club?
If the club is too long for you, then you’re spending extra time during ramp up which is the amount of time spent during your initial downswing. You want a balance between your abilities, ramp up, and momentum while cutting through the wind with as little resistance as possible.
When shortening a golf club, do you have to remove the crown?
When you shorten a golf club, you have to remove the crown, and safely disconnect the shaft from the head.
Why did Lars start golfing?
Father of six and long-time golfer, Lars started golfing because of a summer job when he was nineteen, where he caddied for a Virginia state official. From that moment on, he fell in love with the sport, and made it a core staple in his life. Thirty-five years later, with thousands of games under his belt, he’s here to teach you the fundamentals and master techniques of golf, while recommending proper golfing gear and equipment for every step in your journey.
Why is my driver heavier than my wedge?
That’s because the head is a little heavier to account for the extra force it takes to send your ball as far as it goes. During your driver shot, you should send the ball farther than any other point in your round of golf.
How to measure wrist for golf club?
Step 2. Stand with your hands hanging loosely by your side. Have your assistant measure the distance from where your wrist hinges to the ground, going straight down. This is your wrist-to-floor measurement. Step 3. Use the "Golf Club Measurement Guide" (see Resources).
What is the average size of a golf club for women?
As a result, the standard size of golf club for women is shorter in length and is designed for women that are between 65-inches (5'5") and 69-inches (5'9") tall. For women who are shorter than 5'5", golf manufacturers produce a "petite" golf club that is both shorter and lighter than the standard length club.
How much shorter are ladies golf clubs than men?
Ladies' standard-sized golf clubs run approximately 1-inch shorter than men's clubs.
What factors affect the size of a golf club?
Here’s another factor that affects the appropriate golf club size. The angle and the grip size of the club are as important as the height and wrist-to-floor measurements . However, this means more to serious professional golfers than to someone just starting out.
How tall is a golf club?
Manufacturers usually make clubs to account for golfers anywhere between 4’8” to 6’7” inches tall. The second measurement is wrist-to-floor distance. This is done by standing on a flat surface with your arms relaxed and pointing down. You then measure the distance between the ground and the line where your wrist meets your hand.
Why do manufacturers make golf tables?
Manufacturers create such tables to help everyone from beginner golfers to pro golfers choose the right club size for their play. Here’s how your size affects the dimensions of your needed golf club size and why it matters. Last but not least, the grip size should also be determined for the club to fit perfectly in your hands.
What is the difference between men's and women's golf clubs?
The difference between men’s and women’s clubs is generally noticeable on the grip. Men’s golf clubs have larger grips and are also about 2.5 cm longer than women’s golf clubs. Kids’ clubs are even smaller than women’s for the most part. Knowing what type of golf club you need is the first step in determining the appropriate size.
What is plus and minus golf clubs?
The adjustments on a size chart are made with reference to the standard clubs. Therefore, the plus and minus values show how much shorter or longer your golf club should be compared to the standard, according to your measurements, ...
What is the second measurement of a grip?
The second measurement is the length of your middle finger from the tip to its base. When you have these two measurements, you can then find the appropriate grip size on a manufacturer’s size chart. Note that we only use the middle finger as an example as it applies to most people.
Can you play golf with an off size club?
Because there are plenty of variations, it’s unsurprising that a lot of people sometimes play with off-size clubs. Most pros recommend that even beginners should opt for a perfectly sized golf club in order to have the best learning experience.

Why Is Choosing The Right Club Length Crucial?
- There are several reasons why you should measure your golf club length. For starters, if you play with a club that’s too long or too short, you could end up changing your swing or stance in a way that could impact the outcome negatively. It can also result in inconsistent ball striking when you subconsciously make compensations for your swing. If you’re taller than average height and you…
Components of Club Length
- When it comes to choosing the best driverand irons, there are several factors that you should consider. Here’s a quick overview of the components of club length.
Methods to Measure Club Length
- Here’s an interesting fact according to the TelegraphTrusted SourceThe secret to mastering golf: play with your other handScientists say swapping hands boosts swing control and accuracy, with technique used by top players such as Jordan Spieth and Phil Mickelsonwww.telegraph.co.uk ; playing with your other hand helps you to master golf. Apparently,...
Ideal Club Length Chart
- There’s no standard length of golf clubs which gives clubmakers the freedom to make golf clubs that they assume would be appropriate. You should, however, note that while there is no ideal club length, the USGAhas placed a limitation on the maximum length; 48 inches. With this in mind, you can easily get the club size that you feel would suit your style of play and height. Here’s a quick t…
Final Thoughts
- To sum it up on how to measure golf club length, the ideal length varies based on the player’s height. We have highlighted 2 simple methods that you can use to measure your ideal length, but if for a more thorough fitting, we recommend that you contact a professional. The beauty of golf clubs is that since there’s no standard length, you can easily get customized clubs. You just nee…