- Choose a loft angle for the wedge. Lob wedges typically have a loft angle between 57 degrees and 60 degrees with gap wedges having a aloft in the ...
- Determine the appropriate shaft length for your longest wedge. ...
- Choose a club face style for the golf wedge. ...
- Try out the wedges that you are considering purchasing before buying. ...
How long should a golf wedge be?
The exact length of a golfer’s golf wedge will vary from golfer to golfer as it depends on their height, arm length and golfing technique. However, there are basic standard lengths for golf wedges. The standard length of a sand wedge is 35.25 inches. The standard length of a lob wedge is 35 inches. The standard length of a gap wedge is 35.5 inches.
How do you measure golf clubs for length?
You can measure the clubs yourself with a tape measure, or use a golf club measurement apparatus to determine if the clubs conform to length standards. Place the club on a flat, horizontal surface.
How do you measure for a sand wedge?
This is done by taking a measurement from your wrist to the floor when you’re standing straight while your arms hang relaxed at your sides. The length of your sand wedge should be the point where your height and wrist to floor measurement intersect. What is the Standard Length of a Lob Wedge?
What are the wedges in a golf club set?
A golf club set consist of the following wedges: 1 Pitching wedge: The most common wedge 2 Gap wedge: The bridging wedge 3 Sand Wedge: The rescuer wedge 4 Lob Wedge: The widest loft wedge
How do you properly measure the length of a golf club?
A 48” golf club ruler is placed along the backside of the club with the tip of the rule touching the ground by the club's heel. The final length is measured at the edge of the grip cap (and not the very top). This method is used in all cases except putters that the shaft is not located at the heel.
How long should my golf clubs be for my height?
Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").
What is standard length for golf wedges?
The standard length of a sand wedge is 35.25 inches. The standard length of a lob wedge is 35 inches. The standard length of a gap wedge is 35.5 inches. The standard length of a pitching wedge is 35.75 inches.
How do I measure my golf clubs with a tape measure?
0:103:20How To Measure Golf Club Lengths - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd it varies from club to club. And so to get the length here if you were to put a flat surface.MoreAnd it varies from club to club. And so to get the length here if you were to put a flat surface. Right there and measure from there to the tip of the shaft.
What club length is for me?
1. Measure Your Overall Height (i.e. “static” fitting)OVERALL HEIGHTGOLF CLUB LENGTH ADJUSTMENTS5'4″ to 5'7″minus 1/4″5'7″ to 6'1″standard length in inches6'1″ to 6'2″plus 1/4″6'2″ to 6'4″plus 1/2″7 more rows
How do I know if my golf clubs are too short?
If the heel of the club is off the ground, chances are your clubs are too short. The ideal position is to have your club sitting flat on the ground. If your heel is sitting up a bit, you'll probably find yourself pushing a lot of shots (straight right for the right-handed golfer).
What is the standard length of a 56 degree wedge?
The average length of 56 degree wedge golf club is 35.25 inches (89.54 cm). This is about the same length as a sand wedge. Women's wedges are designed to be an inch shorter than men's wedges. Men's steel 56 degree wedge has a length of 35.25 inches (89.54cm), while a graphite wedge is sized at 35.75 inches (90.81cm).
Should my wedges be the same length as my irons?
First, take a look at the length of your shortest iron, which for most golfers is a 9-iron. Under almost all circumstances, you'll want your wedge lengths to be exactly that length or shorter.
How long should my 56 degree wedge be?
How Far Should You Hit A 56 Degree Wedge?Golfer56 Degree Distance61007808105Average Distance84 Yards5 more rows
How does ping measure club length?
Understand that Ping uses your height and wrist-to-floor measurement to determine the shaft length for your iron fitting. Remember that the taller you are, the longer your shafts should be, and the shorter you are, the shorter your shafts should be.
How does Callaway measure club length?
Callaway Golf - Club Length Measurement Change Specifically, we have transitioned to a method commonly referred to as “ground plane”, using a proprietary digital gage modeled after the USGA's measurement protocol.
What is standard length for golf irons?
The standard length of a steel 9 iron is 35.5 inches. For female golfers, the average length is 34.5 inches. With graphite shaft, the standard length for men is 34.35 inches and for women, it is 33.75 inches.
What is a Golf wedge used for?
Golf wedge used to hit chip, pitch, and bunker shots.
Is an approach wedge is the same as the gap wedge?
Yes, approach wedge and gap wedge are the same wedges.
Should my wedges be the same length?
No, each wedge has a different length according to your handicap.
How far away can you put a wedge in a golf bag?
A golf wedge is one of the most-used golf clubs in the average golfers bag. They range in loft from 45 to 60 degrees and can be used from 120 yards away from the hole to the green.
What is a wedge in golf?
Wedges also come in a variety of sole weights to help the golfer penetrate thicker grass or sand. Many golfers will normally carry three wedges in their golf bag to include a pitching, sand wedge, and a loft or gap wedge. When shopping for a new wedge, picking one that is the right size for your skill level and body size will help ensure you have ...
What is the loft angle of a lob wedge?
Lob wedges typically have a loft angle between 57 degrees and 60 degrees with gap wedges having a aloft in the mid-50 degrees. Gap wedges will be able to be hit from a farther distance from the green, but will not be able loft the golf ball as high as a lob wedge.
Why do golfers use wedges?
The majority of amateur golfers prefer wedges with an large club fact that has a large sweet spot on the club face. The over-sized wedge face increases the potential for mis-hitting shots due to greater ground contact than standard faced wedges.
How long should a golf iron shaft be?
Golf iron shaft lengths will normally vary by a one-half in ch between clubs getting shorter as the number of the iron is large. For example, if you are searching for a pitching wedge, the shaft should be one-half inch shorter than your 9 iron.
How long should a golf wedge be?
Like the other Golf Clubs wedges also differ from each other based on the shaft length. Ideally, the length of a pitching wedge should be 0.25m shorter than the 9-Iron; the gap wedge should be a half-inch shorter than the pitching wedge; the sand wedge should be shorter by 0.75 inches than the gap wedge and the lob wedge should be 1-inch shorter than the sand wedge.
What is a wedge in golf?
Wedges are the club that can provide you with the maximum flight and backspin keeping the ball within the green. A golf club set consist of the following wedges: Pitching wedge: The most common wedge. Gap wedge: The bridging wedge. Sand Wedge: The rescuer wedge.
What is the maximum loft of a lob wedge?
A lob wedge has the maximum loft that ranges from 60 to 64 degrees. The bounce of a lob wedge could be anywhere between 0 to degrees. You should not hit the full-swing shots with a lob wedge since it will raise the ball too high ad you will not get the desired distance.
What is a gap wedge?
Gap Wedge. A gap wedge act as a bridging wedge between the pitching wedge and sand wedge. The gap wedge’s loft ranges from 50 to 53 degrees and the bounce is between 5 to 10 degrees. The major use of a gap wedge is to hit mid-chip shots. You can reach a distance of up to 65m.
What is the bounce of a pitching wedge?
The Pitching wedge has a bounce between 2 to 5 degrees. The Gap wedge has a bounce between 5 to 10 degrees. The Sand wedge has a bounce of between 10 to 14 degrees. The Lob wedge has a bounce between 0 to 10 degrees.
How much bounce does a golf club wedge have?
Apart from this the bounce also helps you to get a higher flight of the ball. The bounce of golf club wedge varies between 2 to 14 degrees. The standard bounce of different wedges are as follows:
How far can you hit a shot with a wedge?
You can even hit a shot up to a distance of 125m using wedges. Wedges come with the highest loft and the shortest shaft. They also have the heaviest clubhead. A pro golfer always uses the appropriate wedge matching the purpose of his shot that allows him to roll up on the scoreboard.
How to measure golf club?
To measure a golf club, start by laying it on a flat, horizontal surface, like a table or countertop . Then, turn the bottom of the club head so it's at a 60-degree angle to the surface you're measuring the club on. Finally, use a tape measure to measure from the end of the grip to the point where the bottom of the club head meets the flat surface. ...
How to measure club length?
Calibrate the club length measuring apparatus. Turn on the machine and move the grip support assembly to the left until it reaches the end of the apparatus. Put the calibration rod into the machine, resting the right end of the rod against the 60-degree sole plate of the clubhead support.
How to rock a golf club back and forth?
Ensure the clubhead rests against the clubhead support, with the sole touching the 60-degree sole plate. The grip should rest in the grip support. Gently rock the club back and forth to be sure it’s not being constrained and can move naturally.
Where is the sole on a golf club?
The sole is the bottom of the club head. You may need to rest the sole against a plate to ensure it sits at the proper angle. Measure from the end of the grip to the end of the sole. Use a tape measure to find the length in inches between the end of the grip and the farthest point that the sole contacts the horizontal surface.
Which plane should golf clubs be measured on?
Clubs should be measured on a horizontal, rather than vertical, plane to get the most accurate results. ...
How to read scale on a scuba diver?
Slide the grip support until it touches the grip, then read the scale. Move the grip support to the right until the butt plate is gently touching the end of the grip. Step back from the scale and read the digital value. ...
How many degrees does a wedge measure?
Some golfers on the PGA Tour use wedges (46-60 degrees) that all measure the same length as their short irons with no variance.
What is the difference between a longer and a shorter golf club?
A shorter club, on the other hand, will be more difficult to produce speed and height, but it will provide more control. If there’s any doubt about wedge lengths, make sure to consult a professional fitter.
What is the shortest iron in golf?
First, take a look at the length of your shortest iron, which for most golfers is a 9-iron. Under almost all circumstances, you’ll want your wedge lengths to be exactly that length or shorter. If you decide to vary wedge lengths, make sure your lowest lofted wedge is the longest in length, and the highest lofted wedge is the shortest.
Do wedges measure weight?
Most manufacturers have designed their wedges to measure a certain length and weight, so veering away from that suggested length will affect swing weight and feel. You may need to add or subtract head weight to get the correct balance in the club if you decide to change up lengths.
How do wedge distances vary?
Wedge distances vary depending on factors such as wedge lofts from the different wedge clubs and surface terrain from where you will be hitting the golf ball from. They also vary depending on your experience and handicap. Being able to hit your wedges a sufficient distance is important, however what is even more important is working on your golf ...
How far should a sand wedge be?
Additionally, to give a better sense of other distances for professionals, a sand wedge would carry approximately 110-130 yards and lob wedges would be best used for full swings below 100 yards. Another thing to note is that professional golfers are meticulous in their preparation.
What is the difference between a lob wedge and a sand wedge?
Whereas a lob wedge will have the shortest carry distances and have a loft of 60-64 degrees. A gap wedge and sand wedge will fit in between these two ranges with a gap wedge being around 52-54 degrees and a sand wedge around 56-58 degrees. As we’re sure you can tell, these variations in loft can make a huge difference in the distance ...
What is the loft of a pitching wedge?
For example a pitching wedge will have the longest carry distances and have a loft of 45-50 degrees. Whereas a lob wedge will have the shortest carry distances and have a loft of 60-64 degrees. A gap wedge and sand wedge will fit in between ...
What is wedge play?
Wedge play is an important component of a good golf game from beginners to mid handicappers to low handicappers, and they make up an important part of a golfer’s bag. In fact the wedge can make or break a score on a hole.
Why are wedges important?
Wedges are important for golfers because they are used as part of the short game which is important to practice from within 100 yards into the green. Wedges themselves are very flexible golf clubs and can be used for approach shots, bunker shots as well as chipping and pitch shots around the green.
How far away should you put your golf club from the green?
It will help with better wedge selection as you approach the green. In general, your golf club selection from within 120 yards of the green will depend on several key factors. These include the terrain of the golf course, the lie of the golf ball and the overall distance to the hole.
How to measure golf club length?
Important Information before we know “How to Measure the Golf Club Length.” 1 The standard irons designed for women are usually an inch shorter than the standard irons designed for men. 2 The United States Golf Agency (USGA) limits the maximum length of golf clubs. 3 The minimum length for all the golf clubs, including putters, is 18 inches. 4 The maximum length for all golf clubs except the putters is 48 inches. 5 The putters do not have the maximum length limit. 6 The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length. 7 A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three.
How long should a golf shaft be?
The chart recommends + 0.25 inches. It means that your golf shaft has to be made 0.25 inches longer than the standard length. Similarly, if your height is 66“ and the wrist to floor distance is 31.5 inches, the chart recommends – 0.75 inches.
What does a longer shaft mean?
The longer shaft does mean longer golf club length. A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three. Therefore we must know about the standard length of the woods, and irons. Let’s first discuss the standard lengths of woods.
How to measure club size with LDA?
The following are steps of measuring the club size using the LDA method. Step 1. First, put the shaft against the wall so that the toe of the driver is placed on the ground. Step 2.
What is the minimum length of a golf club?
The minimum length for all the golf clubs, including putters, is 18 inches. The maximum length for all golf clubs except the putters is 48 inches. The putters do not have the maximum length limit. The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length.
What is the USGA method?
Method 5: The United States Golf Association (USGA) Method. The USGA method is part of the rule book’s method: “Rules of Golf.”. In it, an apparatus containing an angle iron is used. The angle iron forms a 60-degree angle from the horizontal, and it is also used to stop /hold the iron.
Where to place ruler on golf club?
Place the club in the playing position so that the sole of the club / driver is touching the ground. A golf ruler is then placed at the backside of the club so that the top of the ruler is touching the ground by the club’s heel. Now, by using the reading on the measuring rod from the end of the grip cap.
Why is length important in golf?
Length itself is very important as it helps control the distance you hit the ball as well as develop consistency is the length is fitted correctly.
Where is the final length measured?
The final length is measured at the edge of the grip cap (and not the very top). This method is used in all cases except putters that the shaft is not located at the heel. In this method, it is critical that the lie of the club be positioned correctly. If the club is placed with the toe raised higher off of the ground than the heel, ...
What is the USGA method?
USGA Method. The United States Golf Association (USGA) has a method outlined in the Rules of Golf. The USGA uses an apparatus that has a piece of angle iron as a stop that forms at a 60 angle from the horizontal.
Why is the ruler not placed in line with the shaft?
Because the shaft is ahead of the face of the putter, the ruler is not placed in-line with the shaft, rather along the back side of the shaft like an iron would be measured. The difference being that the ruler would touch the ground somewhere other than behind the heel of the club.
