Method 1: Stencil Dye
- Preparing the Dye. Fill up the mason jar with lukewarm or hot water, pour in the dye pack of your choice into the water, close up the mason ...
- Prepare the Disc for the Stencil. Apply acetone on cotton balls or paper towel and gently rub off any logos on the discs. ...
- Apply the Stencil. Cut out a large enough contact paper to cover the entire disc. ...
- Dye Your Disc. Take a strip of contact paper and apply the sticky side down on the back of the disc to create a handle to hold on ...
- Clean off the Excess. Run the disk under cold water, and remember to not touch the dye during this process. ...
How do you spin dye disc golf discs?
If someone wants to spin dye disc golf discs, you will need spinning equipment to make a design. Arguably, this is the method the produces the most complicated and unique disc golf dye designs. But you need to familiarize yourself with the process and learn the skill. The process is similar to the shaving cream dye but uses a different medium.
What is the best worm dye for disc golf?
A brand called CS coating worm dye was used to do a worm dye disc golf and is best used with neon and other bright colors. Meanwhile, using a brand called Rit DyeMore fabric dye also produces a rit dye disc golf dye and I am one of the many users of it.
How do you dye a disc of music?
Pour the dye in the oil tin and make sure there aren’t any bubbles before you apply the disc. Hold the disc using the makeshift handle and set it in the dye gently to make sure the dye doesn’t splash to the back of the disc. Spin it around gently for a couple of minutes and check the color every 5-10 minutes.
How do I make my own all things disc golf logo?
Start by choosing your design (in this case, the All Things Disc Golf logo). I have a vinyl cutter which saves an enormous amount of work for me, but the way you’ll be starting is by hand-cutting. Print out a black-and-white image of the design you want, and cut off a 12”x12” piece of vinyl.
What kind of dye do you use for disc golf discs?
What is the best disc golf dye? I've tried a number of dyes including Rit Dye and Indigo but I prefer iDye Poly above all others. Fishing lure worm dye is also a good choice if you're trying to achieve bright or neon colors. Make sure you're using Poly otherwise it will be difficult to get the dye to hold.
How do you color a disc golf disc?
2:095:55Disc Dyeing 101: The Shaving Cream Method - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake the powdered dye package. And cut off the corner with your scissors. Next fill the two plasticMoreTake the powdered dye package. And cut off the corner with your scissors. Next fill the two plastic cups with shaving cream. Pour a little of the powdered. Into one of the cups filled with shaving.
Can you Sharpie a disc golf disc?
The ink will hold but will fade with time. Water won't affect it, though. A sharpie wouldn't compromise the disc's legality because it doesn't have any "detectable thickness".
Do you need acetone to dye discs?
6:2638:26HOW TO DYE Disc Golf Discs With GLUE - Full Tutorial - Disc Golf NerdYouTubeStart of suggested clipEnd of suggested clipIf you put acetone. Directly into a plastic container. From what i understand it is very likely thatMoreIf you put acetone. Directly into a plastic container. From what i understand it is very likely that it could melt through that. So definitely want to be careful with acetone as well it's flammable.
Can you spray paint a disc golf disc?
The problem with spray painting is the texture comes out poorly and uneven. Plastic is not a good "canvas" for spray paint. Frankly, it looks like garbage. Forget about throwing it, since that adds to reduced flight characteristics...and it's an illegal disc.
Can you use Rit dye to dye disc golf discs?
"For those of you who have missed our old formula that dyed golf balls, golf discs and lacrosse heads, Rit DyeMore once again allows you to dye these items bright, beautiful colors. And it can dye your 3D printed creations too."
Do you mark your disc golf discs?
Rule 813.01F states “All discs used in play, except mini marker discs, must be uniquely marked. A player shall receive a warning for the first instance of throwing an unmarked disc.
Are stickers allowed on disc golf discs?
Stickers placed on the disc by the manufacturer are legal. They cannot currently be placed on the disc by players. A price tag placed on the disc by a retailer needs to be removed before sanctioned play.
What do you write on a disk after ace?
Celebrate your disc golf ace by writing on your disc. Add the date, course, distance of the hole, and you can even have any witnesses sign your disc, too. This is a fun and respectable way to incorporate a Sharpie in to your celebrations.
How long should disc sit in dye?
Place your disc top down on the shaving cream and give it a slight twist. Let the disc set on the die for 24-36 hours then rinse off all shaving cream and dye.
How long does it take lotion to dye discs?
Let the die set for 2 1/2 to 3 hours or more for darker dyes, less time if you wish for a lighter look. Rinse the disc off in the sink and enjoy your new disc!
How do you use shaving cream to dye a disc?
1:2810:33HOW TO DYE DISCS Shaving Cream Swirl Disc Golf Nerd - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can do whatever you want just keep in mind the colors might blend together. So you want to makeMoreYou can do whatever you want just keep in mind the colors might blend together. So you want to make sure that you're not going to be creating browns. And stuff look into the basic color wheel.
Can you bleach disc golf discs?
It's dye is a lighter color. The problem is, the same oxidation that removed the color also breaks down the plastic making it brittle and dry rotted. If you're going to try bleach just dilute it to something like 10:1 with water and then leave it to soak for a few days.
How do you lighten a disc golf disc?
Just toss ur discs outside for a month and let the sun work its magic. FROLF OFF! Just toss ur discs outside for a month and let the sun work its magic. And crack a few months later after being thrown...
What is the medium used to dye disc golf?
The medium is the material that will be used to mix with the dye and is considered as the “bed” which will be used in transferring the dye to the disc. There are a lot of disc golf dye techniques that have been developed and I listed some below with the first two, probably the most popular method:
Why do disc golfers dye their discs?
But why do a lot of disc golf practitioners spend time and resources to dye their discs? What is its importance? For the players like me, it’s all about adding a personal touch to the equipment. Customizing the disc to the player’s style and preference means adding a personal value and possibly help them improve their chances of winning. To others, it’s all about adding a personal flair to the equipment while also showcasing their sense of artistry in dyeing the disc.
What is the best disc golf dye?
The iDye Poly is probably the best disc golf dye kit that you can use. Open the dye then remove the color intensifier that comes along with it because it will not be used in the whole process. Just take the powdered dye and cut the side slowly using a scissor.
What discs are good for dyeing?
But what are the best disc golf discs for dyeing? I will highly recommend those discs made with opaque premium plastics such as Discraft ESP and Innova Star. This type of disc will absorb the dye very well and can last for a long time without fading. In fact, this type of disc is the most popular choice in terms of giveaways or gifts to disc golf players.
What is worm dye used for disc golf?
Through the years, there are a lot of different dyes have been used to create a design in the disc. A brand called CS coating worm dye was used to do a worm dye disc golf and is best used with neon and other bright colors.
How to clean a shaving disc?
Clean the disc by rinsing it with tap water to remove the shaving cream mixture out of the disc and see the design which has been transferred to the disc during this time.
Can you learn disc dyeing?
Disc dyeing is a skill that can be developed over time. If you are a newbie, chances are you cannot produce a nice result right away. But, the more you practice and keep on doing it, your skill will improve in no time. My advice to you, aside from reading materials and learning from videos, is to look for someone who is good at disc dyeing. This will allow you to learn other techniques and skills from professional dyers.
How to put a golf disc on a plate?
Once you have prepared the design/pattern, slowly put the golf disc on top of it. Gently Push the disc onto the plate
How long does it take to dye a golf disc?
Slowly immerse the golf disc into the dye mixture. Depending on the type of dye and what color you are using, the process can take anywhere from 5-10 minutes.
How to get a golf stamp off?
Choose your preferred golf disc. Pour a few drops of acetone on a coarse cloth and gently smear it all over the stamp. Rub until the stamp comes off. Make sure there is no gooey residue including oil from people’s hands on the disc surface. In the case of shaving cream dyeing, this step is not necessary.
What is used to hold dye in place?
Shaving cream: shaving cream is used as it helps holding the dye in position while it is soaking into the golf disc
How to avoid air bubbles on a disc?
Wrap the stencil edges tightly around the sides of the disc. Use a hard-edged card like a credit card to rub the places. It will help you avoid air bubbles. The dye can go inside the air bubbles ruining your design
What paper do you use for vinyl?
Vinyl paper: we recommend using Oracal 651; however, if you are getting started with disc dyeing, you can go with Oracal 631, as it is thicker and lenient on mistakes. It can be easily availed from a sign shop
What is the best way to remove stamps from golf discs?
Acetone for removing the stamps and prints off of the stock golf disc. It is advised to use acetone in a well-ventilated area
Why do you dye a golf disc?
Dyeing a golf disc adds sentimental value to your set, and a bit of personal flair never hurt anybody! And although it might seem daunting at first, once you set yourself on the design, you’re already halfway done!
How to dye discs?
Method 1: Stencil Dye. For this method, you need to print out the exact design or stock image you want on your disc and cutout a stencil of the design. This is the most popular way to dye your discs, as the image can further personalize your equipment.
How to make a stencil for a disc?
Fold the sides of the contact paper over the edges. Stick your stencil on the disc using scotch tape on the sides and cut out through the contact paper underneath using your x-acto blade. Remember to cut out the parts you want to dye.
How to clean a disc of dye?
Run the disk under cold water, and remember to not touch the dye during this process. Take off all the contact paper while keeping under running water. Air-dry the disc for a clean finished product.
How long does it take to dye a disc?
Spin it around gently for a couple of minutes and check the color every 5-10 minutes. Remove it from the dye when the color has reached the intensity to your liking, which should take around an hour.
How to make a splatter with a squirt bottle?
Start with a slow spin and apply the colors using the squirt bottle to your liking. You can adjust the spinning speed for bigger splatters. But be cautious of the volume of your dye. If it’s thin, then you don’t have to spin it too fast for a large splatter.
How to get rid of logos on discs?
Apply ace tone on cotton balls or paper towel and gently rub off any logos on the discs. Make sure to do this step in a well-ventilated area, as the acetone can be quite strong. Give the disc a quick rinse before moving on to the next step, to remove any excess acetone.
How to make a disc golf logo?
I have a vinyl cutter which saves an enormous amount of work for me, but the way you’ll be starting is by hand-cutting. Print out a black-and-white image of the design you want, and cut off a 12”x12” piece of vinyl. Place the image underneath (you may want to use painters’ tape to hold them in place), and start tracing the edges of the design with the X-Acto knife. You’re looking to apply enough pressure to pierce the vinyl, but not the paper backing to the vinyl. This isn’t critical, but will make things easier when you go to transfer the stencil to the disc.
Which discs will dye?
Adam Hassett: The general rule of thumb as far as which discs will dye is that the higher quality (and cost) of the plastic, the better it will dye. Innova Star or Champion would probably be the most familiar to people, but most companies these days have a premium plastic or two which will take dye. Discs that won’t dye are the low-cost plastics, like DX plastics.
How long does it take to dye vinyl?
Depending on what color you’re using and how bright you’re looking to get the design, this can take anywhere from five seconds to ten minutes. Red is the color which dyes the quickest; the others dye at about the same rate. Once you’ve checked it and you’ve seen all the dye has taken, you can peel off the vinyl and you’ll have your dyed disc! However, for this article we’re only going to peel off some of the vinyl, and dye that part using the Shaving Cream Method.
How to get goo gone off a disc?
Spray some Goo-Gone onto the disc (about ten drops worth is enough), and rub it onto all of the spots with residue. Give the Goo-Gone a few seconds to penetrate, and the residue will rub right off with your thumb or a piece of toilet paper. With this done, wash the Goo-Gone off the disc and you’re ready for Part II.
What plastics won't dye?
Discs that won’t dye are the low-cost plastics, like DX plastics. For the best discs to dye, it’s a draw between MVP Discs’ Neutron plastic, and Latitude 64’s Gold Line plastic. Colors appear very bright on both of them, and it takes a very long time before the dye starts to fade.
What stripe strips stamps off of stock discs?
Acetone– This strips the stamps off of stock discs. Make sure to use this in a well-ventilated area.
Is Sweet Hat a disc golf company?
The long term plans for Sweet Hat are to become not just a disc dyeing company, but a disc golf services company. Anyone who’s reading this article is aware of how fast disc golf has grown over the past few years, and as more players continue to get into the sport, there’s going to be room for businesses who are able to provide an ‘all-in-one’ stop for course construction, improvement, and event planning.
About The Tutorial
Setting Up The Dye
- The iDye comes in dissolvable packets. Mix 1-liter water with one packet of iDye Next, add a few drops of liquid dishwash into the mixture. This will help reduce surface tension that ultimately prevents the formation of air bubbles Choose your preferred golf disc. Pour a few drops of acetone on a coarse cloth and gently smear it all over the stamp....
Stencil Dyeing
- 1. Choosing a Design
You can select any design you prefer. If could be anything from your favorite logo to any symbol, etc. Once you select a design, print out the B&W images of the design. Next, cut off a 12”x12” piece of vinyl paper Place the design underneath the vinyl paper and use the painter’s tape to hol… - 2. Preparing the Stencil
Once your stencil is ready, you need to cover the weeded part using the painter’s tape. This will help the stencil maintain its shape Flip the stencil upside down, so that its paper side is up. Gently scrub down the back so that the tape determinedly contacts the vinyl Next, peel the paper while …
Shaving Cream Dyeing
- In this method of dyeing, you don’t need to remove the stamp from the disc. But, before you start, make sure that the disc is perfectly clean from any residue. 1. Preparing the Shaving Cream-Dye Mixture: You are required to prepare two mixtures of different consistencies – a base mixture and a dye mixture. For the base mixture: 1. Take a large mixing bowl and mix water with shaving cre…
Final Words
- The procedures mentioned are relatively easy, fun and, inexpensive. You can create any pattern you like. It will take you a couple of tries to perfect the procedure. These two methods are the prominent ways to dye your disc golf discs. If you have any doubt about any point that we have mentioned, you can ask us; we are happy to help.