how to paint fiberglass golf cart body

by Jay Kub Published 3 years ago Updated 2 years ago

Sand the surface of the golf cart body with 1000 grit sandpaper. Use a circular motion when you are sanding to get the best results. ...
Set up the golf cart in a garage to prevent any outside debris from blowing onto it while you are painting. ...
Get acrylic paint, primer and sealer from a local auto body paint shop or from an online retailer such as TCP Global. ...
Spray on three to four base coats of the acrylic paint to the golf cart body. Allow 20 minutes between each coat. ...
Leave the golf cart to dry for a 24-hour period. Once that period has passed, remove the masking tape and plastic and you will be able to use the golf ...

Part of a video titled How To Paint A Club Car Precedent Golf Cart at HOME

3:41

16:05

Stuff once we spray it with adhesion promoter we're gonna start priming all of the plastics. AndMoreStuff once we spray it with adhesion promoter we're gonna start priming all of the plastics. And then we're going to seal them and we're going to start shooting. Color.

Full Answer

How do you repair a fiberglass golf cart?

Repairing Fiberglass Body Golf Cart Clean the crack on the golf cart body with mineral spirits Dry, prime and lightly sand the surface Glaze the surface using a product such as Bondo Alternatively, if the crack is not on the gel coat but the cart body, you will have to paint it with a ...

How to paint a golf cart body?

Scrub the parts of the golf cart body that you plan to paint with fine-grit sandpaper using firm pressure and a circular motion. Remove the sandpaper dust by washing it down with water from a hose. Allow the cart to air dry or dry in the sun completely. This may take some time and you’ve to be prepared for the wait.

How do you paint a golf cart with aerosol cans?

Painting A Golf Cart Using Aerosol Cans Using a suitable aerosol primer apply a layer of primer to the cart, working from top to bottom. Allow the primer to dry for the recommended time and add another coat. When this layer is dry, it should be sanded down with P1000 grit paper.

What kind of plastic is a golf cart body made of?

The 1993 model Club Car used an indestructible thermoplastic resin known as ArmorFlex for its body material. You can opt for a three-stage process of either classic painting style or custom paint to make the golf cart body look unique.

What kind of paint do you use on a fiberglass golf cart?

Fiberglass surfaces are nonporous, much like plastic, and react best to acrylic spray paint. Make sure you apply at least two coats of acrylic paint primer before painting.

What kind of paint do you use to paint a golf cart body?

acrylic paintGet acrylic paint, primer and sealer from a local auto body paint shop or from an online retailer such as TCP Global. Two thin coats of primer should be applied first. Allow 20 minutes between each coat. Once the second coat is on it will need to dry for one hour.

How do you prepare a golf cart body for painting?

1:3928:49Prepare and paint a golf cart body in one day! Rustolium ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipStore and i use these sponges that have the scotch brite pads on them and it is like a two in one itMoreStore and i use these sponges that have the scotch brite pads on them and it is like a two in one it cleans. And it roughs up the surface. Um takes off minor imperfections takes off all the grease.

What is the best paint to use on fiberglass?

Acrylic Latex Acrylic paint adheres well to fiberglass, overcoming one of the main challenges to painting this material. Acrylic paint is less likely to crack and blister, and will hold up well to cleaning. This water-based paint is easy to apply, and contains fewer chemicals, so is more environmentally friendly.

How many cans of spray paint does it take to paint a golf cart?

Buy at least three or four cans to ensure that you have enough for the process. Even if you don't need the extra cans, you can save them for touch up work. Spray the surface of your cart with the can held at least 10-12 inches from the surface.

How much does it cost to paint a golf cart body?

Average Cost of a Professional Golf Cart Paint Job While prices for golf cart paint jobs can range from $100 to $1000 if you decide to hire a professional for a standard paint job, expect to pay anywhere between $100 and $500.

How can I paint my golf cart at home?

13:4816:05How To Paint A Club Car Precedent Golf Cart at HOME - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo my painter i was going to drop off just the body. The center section in the front uh just theMoreSo my painter i was going to drop off just the body. The center section in the front uh just the body clip he told me 450 to paint all three of those pieces.

How much paint do I need to paint a golf cart?

How much paint does it take to paint a golf cart? If you are painting the cart yourself and you purchase spray paint, it could take anywhere from three to seven cans of paint.

Are golf carts plastic or fiberglass?

The body of a golf cart is primarily made of sheet steel, fiberglass or sheet aluminum. The frame is generally made of steel while tires, foam seat cushions and steering mechanisms are made of rubber, vinyl and metal. Parts like suspensions, drive trains, motors and brakes use metal.

Do I need to prime fiberglass before painting?

You can start by using a primer, although it is not necessary with a fiberglass boat. Be sure that the primer you are using is compatible with the paint you've chosen. After you've applied one layer of primer, you can use a 300-grit sandpaper and lightly sand the boat before applying the next coat.

How do you prep fiberglass for painting?

How to Prep a Fiberglass Boat for PaintStep One: Know the Fiberglass First. Fiberglass and wood have very little in common—especially when it comes to painting a boat. ... Step Two: Remove Debris. ... Step Three: Protect. ... Step Four: Removing The Gelcoat. ... Step Five: Wash It Down. ... Step Six: Apply The Primer.

Does spray paint stick to fiberglass?

Unlike wood, fiberglass surfaces are nonporous, making them unsuitable for spray paint adhesion.

How much paint do I need to paint a golf cart?

How much paint does it take to paint a golf cart? If you are painting the cart yourself and you purchase spray paint, it could take anywhere from three to seven cans of paint.

What is the best paint to use on plastic?

Best Overall: Krylon Fusion All-In-One Spray Paint Because it also protects against rust, it can be your MVP when painting plastic furniture or other objects that have metal components.

How do you spray paint a golf cart?

3:4116:05How To Paint A Club Car Precedent Golf Cart at HOME - YouTubeYouTubeStart of suggested clipEnd of suggested clipStuff once we spray it with adhesion promoter we're gonna start priming all of the plastics. AndMoreStuff once we spray it with adhesion promoter we're gonna start priming all of the plastics. And then we're going to seal them and we're going to start shooting. Color.

What's the best primer for plastic?

The Best Primer for Plastic: KRYLON ColorMaster Primer Their ColorMaster range is available in a variety of colors, including a clear aerosol, that can be used on various surfaces including plastic, metal, and wood. It can be used inside or outside, and it dries smoothly and evenly.

How much does a quart of golf cart paint cost?

You only need about one or two coats of this depending on how dark your golf cart’s original color is. A pint should suffice, but a quart is only $12-$20, so you may as well get more than you need.

What is the best finish for a cart?

If you want a mirror like finish, or your cart is going to spend a lot of time in the sun, then the base coat/clear coat two stage job is best.

What to do when you don't want paint on your car?

Once you have the trims off, it’s really important to cover your headlights, windshields, roof posts, interior, and literally everything you don’t want paint on. The easiest way to do this is with some masking tape and paper or plastic film. Garbage bags can work in place of film, but the masking tape is pretty necessary.

What to do when painting a house?

A few safety notes first, be sure to wear eye and breathing protection while sanding and painting to protect from debris and harmful chemicals, and make sure to only paint in well ventilated areas. Failing to use good ventilation could result in loss of consciousness while painting which will completely ruin your paint job.

How much does a can of paint cost?

Each can costs about $12-$20 depending on the brand and quality, and you’ll need about 2 for each coat. All in all, it will come out to around the same price for the paint, but you don’t have to buy a bunch of tools.

Can you spray paint a golf cart?

Whether you have a Yamaha, Club Car, or E-Z-GO golf cart, the paint is all very similar, so this advice should apply to almost all golf carts .

Can you use garbage bags to paint?

Garbage bags can work in place of film, but the masking tape is pretty necessary. Tape your film to the protected areas, making sure to cover the whole protected area without overlapping into what you intend to paint. Next you’ll need to rough up the surface of the current paint.

How to protect golf cart from paint?

Apply masking tape to areas you don't want painted. For non-removable parts of the golf cart that you want to protect from paint, use masking tape. Keep an eye out for license plates, logos, or other decals that you want to keep visible. Line the outer edges of the windows to keep from spray painting them.

How to keep paint from peeling on golf cart?

Apply a thin coat of paint primer to prevent peeling later on. Primer helps the spray paint adhere smoothly and evenly to the cart. Spray the primer in even amounts over the body of the golf cart and wait approximately twenty minutes before adding on paint.

How to make a cart look more opaque?

4. Apply more coats of paint to achieve a deeper color. Each coat will make your cart's color look richer and more opaque. Continue applying coats until you reach the desired color. Plan out enough time to apply at least three coats of paint, though you may need more to make the color you want.

How long does it take for a paint cart to dry?

4. Let your cart dry for at least twenty-four hours. Although the sealant may seem dry after two hours, the cart will need time to cure after painting to fully set. Leave your cart outside or in your garage with the windows and doors open and leave it alone for a full day.

How to get paint off of a cart?

1. Clean your cart. Residual dirt can cause your coats of paint to flake or peel. Remove all dirt and grime from your cart with an oil-based dish soap. Hose off the soap with cold water, and dry off your cart with a towel. Avoid applying the paint until your cart is completely dry. Mix dish soap with water in a bucket and apply it ...

How to keep carts from staining?

Purchase a pair of disposable gloves. Gloves protect your hands from paint or primer stains while you're working on the cart. Try not to use gardening or mechanic's gloves while you're working to avoid staining your carts with dirt or grease. Disposable rubber gloves are ideal to keep your work area clean.

Can you paint a cart in the garage?

Check the weather report for the next day to make sure your cart will not receive wind or rain exposure. If the weather looks stormy, paint your cart in the garage with the doors open.

What Kind Of Paint Do You Use On A Golf Cart?

A commonly used type of paint for your golf cart comes from the automotive line of materials. Personal preference dictates which type you use, and many golf cart enthusiasts are experienced automobile hobbyists and are familiar with specific paint properties. The key to a successful paint job is when the paint has proper adhesion to the surface.

How to test paint on cart?

The tape test should be used before committing to covering the entire cart with acrylic. Put a test paint swatch on the surface, let it dry thoroughly, and put some tape over the new color. Press the tape down hard against it and then peel the tape back. If any of the paint comes off, you will need to do surface preparation – sanding, ad pro, or both.

What are the advantages of acrylic paint?

The advantage acrylics have is that added chemicals and hardeners are unnecessary. Using a rattle can is cheaper than getting out the spray gun, and many of the desired colors are available premixed. A downside of the acrylics is that they are lighter (the aerosol droplets are smaller) and require more coats to achieve the wanted final result.

How to get paint to stick to cart?

Use the 220 sandpaper to provide an appropriate surface for the paint to stick to. Lightly sand over the entire surface to be painted using a circular motion. This sanding is to roughen the surface to make the paint adhere better. Wiping down the cart with dawn liquid soap or Simple Green and water on a cloth will cut the grease and remove any wax buildup. Use a hose to rinse off the entire cart, and then, to eliminate any lint, use the microfiber towel to remove all moisture.

How long does it take for acrylic paint to dry?

Urethane depends on a quick-drying toxic solvent which makes the acrylic safer. Drying time, however, is 24 to 48 hours between coats.

How to make a paint booth?

You can make a paint booth by using inexpensive plastic sheeting or drop cloths from the local hardware store. Putting one layer on the floor will block moisture from the concrete and hanging other sheets around in an area roughly larger than the golf cart will protect from floating debris.

How much does acrylic paint cost per gallon?

Using a spray gun with acrylics opens a new dimension of factors…cost. Acrylic lacquers can go as high as 250 to 300 dollars per gallon. Acrylic enamels are better in price and run around 100 to 150 dollars per gallon.

How to sand a golf cart?

Step 1. Sand the surface of the golf cart body with 1000 grit sandpaper. Use a circular motion when you are sanding to get the best results. This will create a lot of dust, so wear safety goggles to keep the dust out of your eyes. Rinse the dust off with a hose when you are done and dry the body with a soft towel. Step 2.

How long does it take for acrylic paint to dry on a golf cart?

Spray on three to four base coats of the acrylic paint to the golf cart body. Allow 20 minutes between each coat. Let it dry for one hour after you have applied the final coat. Then apply two thin coats of the sealer for the topcoat. Be sure that you only buy sealer that is compatible with acrylic paint.

How long does it take for a golf cart to dry before painting?

Allow 30 minutes between each coat of the sealer. Leave the golf cart to dry for a 24-hour period. Once that period has passed, remove the masking tape and plastic and you will be able to use the golf cart and show off your new paint job.

How to get shine out of fiberglass?

Paint doesn't stick to glossy surfaces, so you need to remove all traces of shine to help it adhere. Sand the fiberglass with 150-grit sandpaper until it is no longer shiny, then work your way up to 400-grit sand paper. You want the surface to feel smooth and dull.

What is the best paint for a boat?

Polyurethane or epoxy paint are better suited to surfaces that will see a lot of heavy use, such as boats, bathtubs, and sinks. Polyurethane paint is ready to use. Epoxy paint must be mixed with a catalyst, just like epoxy resin. The catalyst is usually sold with the epoxy paint.

Why is my top coat tacky?

Wait for the topcoat to dry and cure before using the object. One of the reasons paint and topcoats turn tacky is because they did not finish curing. Leave the object alone for a few days, or however long it takes for the topcoat to cure. Read the label on the can of topcoat to find out the exact curing time.

How to apply spray paint to a tray?

For more specific instructions: Brush-on paint: pour the paint onto a tray, then apply it with a foam roller first. Smooth it out with a fine-bristled paintbrush. Spray paint: apply the paint in short bursts, rather than one continuous, side-to-side motion.

How to mix epoxy paint?

If you are working with epoxy paint, you will need to mix the 2 parts together (epoxy and catalyst) first ; other types of paint do not require any preparation. Apply the paint systematically, working from the right to the left (or left-to-right if you are left-handed), top-to-bottom.

How to make paint not tacky?

1. Make sure that it is not too cold or humid. If it is too cold or too humid, the paint won't dry or cure properly. This can result in the surface turning tacky. Ideally, the humidity should be 60% or lower. The temperature should be between 65 to 90 °F (18 to 32 °C).

Is fiberglass paint smooth?

Learn more... Painting fiberglass is tricky because the surface is smooth. With the right preparatory steps, however, you can get a smooth, professional-looking finish. The trick is to take your time and go slowly, especially between layers of primer, paint, and topcoat (if you are using it). The exact paints you use will depend on ...