
How to Paint your Driver Head
- Use acetone or any paint remover to remove the existing paint from the driver head.
- Dedicate a good amount of time while using sandpaper on your driver head. Good preparation time will pay off in the long run.
- Apply a thin layer of etching primer. This will help the paint stick on to the driver head’s surface better.
- Let the driver head dry before you apply another thin coat of primer. Allow it to dry up completely.
- Paint with two or three-parts Polyurethane would be your best choice to paint your driver head.
- Apply three thin coats of paint with intervals in between each. The time allowed in between each application will allow the paint to cure completely. ...
How do you Paint Your golf clubs?
If you have a set of clubs that you would like to paint, there are a few steps you should follow. Prepare the shaft. It makes no difference if you are working with a graphite or a steel shaft, because each has to be roughed up so that the paint will adhere.
What kind of paint do you use on a driver's head?
Paint with two or three-parts Polyurethane would be your best choice to paint your driver head. Apply three thin coats of paint with intervals in between each. The time allowed in between each application will allow the paint to cure completely. Applying thick coats will form lumps or turn the paint runny.
How do you remove paint from the head of a driver?
Use acetone or any paint remover to remove the existing paint from the driver head. Dedicate a good amount of time while using sandpaper on your driver head. Good preparation time will pay off in the long run. Apply a thin layer of etching primer.
How to remove paint from a golf iron?
Use Acetone or paint remover to remove the paint from your golf iron. Wear latex gloves before you use acetone. Let the golf iron dry up completely. Use a pointed object like a needle or a safety pin to clean out inaccessible areas in the golf iron.

What kind of paint do you use on a driver?
The best paint to use on golf clubs is enamel paint. Many golfers will also use acrylic paints, and those would be the next best alternative. The most important thing to consider about golf club paints is their longevity.
Can you spray paint a driver?
As we mentioned, we highly suggest using a spray paint so that the paint does not go on too thickly or cause issues with the club's overall look and feel. You will also need to choose a paint which can handle the conditions that a golf driver is often put through.
How do you custom paint a driver head?
0:135:43How to customize your golf driver - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first thing you're gonna want to do is remove the driver from the shaft. If you can it'll makeMoreThe first thing you're gonna want to do is remove the driver from the shaft. If you can it'll make this project a lot easier.
What paint to use to paint fill golf clubs?
Typically, enamel hobby paint is more durable, but we've found acrylic hobby paint to be easier to use and easier to dilute (which is important). Next, your clubs need to be clean and existing paint needs to be removed.
How can I make my driver look new?
3:4312:11Fixing Driver Pop Up Marks With TOOTHPASTE !! - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd go from there and what we're gonna do is just real gently just start to rub. It in littleMoreAnd go from there and what we're gonna do is just real gently just start to rub. It in little circles just gentle pressure not too hard. And just kind of work it around for a little bit. Okay.
How do you refurbish a golf driver head?
1:1510:16DIY - How To Repair Golf Driver Club Head Paint! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I did some google searching. And in my hand I've got Golf Club touch-up paint from golf paintsMoreSo I did some google searching. And in my hand I've got Golf Club touch-up paint from golf paints Inc and today what I want to do is a little bit of club head surgery on the m2.
How do I customize my driver?
0:095:38How to customize your Golf Driver (pt.2) - YouTubeYouTubeStart of suggested clipEnd of suggested clipObviously your choice of paint. This one is a flat block. And it comes with paint and primer. You'reMoreObviously your choice of paint. This one is a flat block. And it comes with paint and primer. You're probably gonna want to get something that has paint in primer or if you want to buy the primer.
How do I remove a sky mark from my driver?
Method #1 – Magic EraserUnscrew your head and place on top of your work bench.Clean your club with a damp microfiber cloth. Then allow club to air dry.Use a magic eraser and rub against the sky mark.Apply water to the magic eraser for even better results.
How do you paint club heads?
How to Paint Steel Golf Club HeadsPurchase a golf cleaning rotary tool from a golf shop. ... Set the rotary tool with brass brush attached on the lowest setting. ... Use soap and warm water to clean off the dirt and debris after using the rotary tool. ... Apply thin, even coats of any oil-based paint with a small paintbrush.More items...
How do I fill my golf clubs with paint?
0:004:48HOW TO PAINT FILL YOUR GOLF CLUBS - YouTubeYouTubeStart of suggested clipEnd of suggested clipHey what's going on guys my name is Jared Sabo on the Assisting golf professional at airportMoreHey what's going on guys my name is Jared Sabo on the Assisting golf professional at airport national golf course and today I'm going to run through how to paint fill your golf clubs. Whether you're
How do you blacken golf clubs?
1:404:56HOW TO MAKE YOUR GOLF CLUBS LOOK RAW - YouTubeYouTubeStart of suggested clipEnd of suggested clipDramatic purposes we'll use this big ol tub. Not like I really care to have a big jug of whiteMoreDramatic purposes we'll use this big ol tub. Not like I really care to have a big jug of white vinegar laying around and we're gonna let it soak for 48. Hours that's a long time.
How do you fix chipped paint on a golf club?
How to Repair Paint Chips on Golf ClubsPurchase the paint. ... Remove dirt and grit from the club. ... Brush a small bit of paint on the club's chipped area with a foam brush. ... Sand the new paint lightly with a piece of fine-grit sandpaper, if required. ... Buff the painted area with wax paste and a clean cloth.
What paint should I use on my golf clubs?
Best Paint to Use on Golf Clubs. Though some suggest using acrylic paints on golf clubs, I would strongly recommend enamel paints and paints with epoxy mixed in them. Enamel paints offer faster drying times and stick on well, making them the best paint to use on golf clubs.
How to get paint off a golf club?
Wear latex gloves before using acetone. Let the golf club sit with the paint-remover for a good length of time. Once the club has soaked in acetone, use a toothbrush dipped in acetone to scrub the paint off.
How to prepare driver head before painting?
How to Prepare your Driver Head before Applying Paint. Use acetone or any paint remover to remove the existing paint from the driver head. Dedicate a good amount of time while using sandpaper on your driver head. Good preparation time will pay off in the long run. Apply a thin layer of etching primer.
How to remove paint from wedges?
Steps: Remove the existing paint from the wedges by soaking it in a bowl filled with acetone for a few minutes. Dip a toothbrush in acetone and scrape the paint off the wedges. Let the wedges to dry. Dip a toothpick in enamel paint and paint fill your wedges. To remove any excess paint, use a razor blade.
How to put acetone on a putter?
Take a metal bowl and pour acetone into it. Wear gloves made of latex as a precaution before you transfer the acetone. Place your putter in the metal bowl filled with acetone. Make sure all parts of the putter that you want to be painted are submerged well in the acetone.
How to sand a steel shaft?
Sand the steel shaft using sandpaper to prepare it before painting. This will enable the paint to stick on properly. To roughen up graphite shafts, remove the coating at the tip of the shaft. Then use the sandpaper to sand it.
How to clean a putter?
To ensure that your putter is free of paint, grease, and debris, use a toothbrush dipped in dish washing soap and make sure you clean it. Let the putter dry completely. Once it’s completely dry, use a toothpick to apply paint on the putter. Dip the toothpick in the paint of your choice and apply it on the putter.
Why Paint Golf Clubs?
Golf clubs go through wear and tear, paint can chip. Before you throw out your old clubs, make sure that they need replacing or are they just looking worn out. A coat of the correct golf club paint can restore your clubs to looking like new again.
Best Type of Paint to Use
When looking for suitable paint to repair chips, scratches or, scuff marks, it is essential to choose a paint that will withstand the heavy impacts that all golf clubs will encounter.
How to Paint Golf Clubs
The reasons for the painting of golf clubs can be to repair chips on a driver, paint the complete shaft or, Custom paint fill.
Steps to Follow
Place Acetone in a suitable bowl and allow the golf clubs to soak in the paint remover. It is recommended that clubs soak for at least six hours allowing the acetone to permeate to all the difficult places to reach.
How to Customise your Golf Clubs
Customizing your clubs refers to changing the color of the embossed areas on your club such as names and numbers. This has become an increasingly popular way among golfers to personalize their clubs known as Custom Paint Fill
1. Ecovue Premium Paint Pens (Currently Out Of Stock, Will Update Soon)
Ecovue paint pens are easy to use and produce accurate and smudge-free results when paint filling letters and, numbers
2. G-Paint Golf Club Paint
Using G-Paint golf club paint is an easy way to Custom Paint Fill your golf clubs. The recommended set consists of 4, 0,3 fl oz bottles with Black, White, Red and, Blue colors It can be applied to numbers, letters and, all embossed areas of your club.
What is the rage to have club shafts painted in different colors?
Next, it was head covers that showed a lot of creativity; then the professional women turned to painted balls to make a fashion statement. Now it has become the rage to have club shafts painted in different colors. In fact, some of the manufacturers make clubs ...
How long does it take for a golf club shaft to dry?
When you are finished, place a piece of wood under both the grip and the clubhead and allow the shaft to completely dry. Plan on allowing your shafts about 48 hours to dry completely before you use them.
Can you use latex primer on metallic paint?
You might consider using a latex-based primer, because it is easier to clean up. Also, be sure that both your primer and your paint are formulated to be used on metallic surfaces.
Nuscas
I have a Taylormade Jetspeed driver and I'm growing tired of the graphics on the top crown.
sevenfourate
With your time, cost of materials and the finish you'll get compared to the factory-fresh pristine job you'll get from Continental; its a no-brainer.
bladehunter
Send it to continental or if you know anyone in the auto body industry talk to them. Base/clear coat is what you want to use for max durability and ability to buff out minor scratches . Don't rattle can it. It will look like a** and won't last 5 minutes. It's a Very simple Jo for someone who paints for a living.
Forged4ever
In the end, only three things matter~ <br /><br />How much that you loved...<br /><br />How mightily that you lived...<br /><br />How gracefully that you accepted both victory & defeat...<br /><br /><br /><br />GHIN: Beefeater 24
EKELLY
Send it to continental or if you know anyone in the auto body industry talk to them. Base/clear coat is what you want to use for max durability and ability to buff out minor scratches . Don't rattle can it. It will look like a** and won't last 5 minutes. It's a Very simple Jo for someone who paints for a living.
Saluki91
DIY isn't really that hard, and if you follow the KISS principle, the finished product can look quite nice. It isn't really that expensive, but it will require time. That being said, Continental does great work for an even better price...
sevenfourate
Thanks guys. Unfortunately I live in Canada so sending to Continental probably wouldn't be worth it.
Walkerjames
So I did this driver For RP a while back and I thought I'd share the steps it took with everybody.
Walkerjames
Thanks for posting this walker! Did you let it air dry or cure the paint in a booth?
GolfSpy WD
This falls under the category of looks really easy to do, really hard to actually do well.
Walkerjames
This falls under the category of looks really easy to do, really hard to actually do well.
Walkerjames
Great job on the club and the write up. Have you ever done any airbrushing?
What is golf club polishing?
Golf club painting (or polishing) helps adding a little flair to your clubs, which can be done by striping the paint and creating some color scheme. Indeed, it is a great way to personalize your golf clubs according to your desire preference.
Is custom painting a complex process?
Custom painting, finishing, can be a tedious and even a more complex process most especially for the inexperienced. That is the reason why only hire a company that is proven to have the right reputation to do the job. JD’s Club is proud to have met such requirements.
Do you need custom paint and finish on golf clubs?
The club that works perfectly well for one player might not just give the same level of performance for you (or the other way around). Thus, custom paint and finish for golf clubs is necessary; that is, if you want to get the most out of your golf clubs. Custom paint and finish for golf clubs is the way to go.
