how to pick the right golf driver

How to choose the best golf driver?

 · If your average swing speed is between 80 and 90 mph (the average for most male golfers) you should be using a driver with about 10.5° to 12° of loft. For recreational golfers, this, combined with new two-piece balls that spin at a lower rate, means your launch angle and spin rate will be optimized. LENGTH No standard length exists for a driver.

What is the proper way to hit a golf driver?

What does the right grip look like? The proper grip should let you hold the club using your middle and ring fingers of your left hand with very little touching the pad with the thumb. If your finger doesn’t touch your thumb, it’s a sign that the grip is too big. The Shaft

How to hit the golf ball straight with a driver?

 · How To Choose The Right Shaft For My Driver? Length Of The Shaft. Basically a matter of preference based on feel, shaft length can be roughly determined by the... Weight Of The Shaft. Graphite shafts are manufactured in a variety of weights ranging from the sub-40-gram category up... Torque Of The ...

How to hit Golf Driver consistently?

How do I know what golf driver is best for me?

Driver loft, which typically ranges from 8.5° to 15°, should match your swing speed. The slower your swing speed the more loft you should have. If your average swing speed is between 80 and 90 mph (the average for most male golfers) you should be using a driver with about 10.5° to 12° of loft.

How do I know what size driver I need?

LENGTH. The driver is the longest club in your bag. Men's drivers tend to measure between 45 and 48 inches, while women's drivers are typically between 43 or 44 inches. The size used depends on how a golfer feels in terms of overall control.

How do you size a golf driver?

Simply hold your golf club at 45 degrees to the ground or as in your playing position. At this point take a golf club ruler or take measure and place under the sole of the club. Measure to butt of grip. This will give you you an accurate and USGA standard for measuring your golf driver.

How do you know which club driver to use?

A driver, however, usually has a number such as 9.5 or 10.5 to indicate the loft of the club. Drivers are available in a variety of lofts. Wedges typically don't have numbers. Instead that have letters such as P or PW for pitching wedge and S for sand wedge.

How long should a golf driver be for my height?

1. Measure Your Overall Height (i.e. “static” fitting)OVERALL HEIGHTGOLF CLUB LENGTH ADJUSTMENTS5'7″ to 6'1″standard length in inches6'1″ to 6'2″plus 1/4″6'2″ to 6'4″plus 1/2″6'4″ to 6'6″plus 1″7 more rows

What are the most forgiving drivers?

Most Forgiving DriversCobra LTDx Max Driver. ... Honma T//World GS Driver. ... Wilson Staff D9 Driver. ... Tour Edge Exotics E722 Driver. ... Titleist TSi1 Driver. ... Callaway Rogue ST Max Driver. Best Sound And Feel In 2022. ... Cleveland Launcher XL Driver. Suits A Broad Range Of Golfers. ... Mizuno ST-Z 220 Driver. Great Value Performance.More items...•

How long should my driver be?

The standard length of a driver for men used to be 43.5 inches with a steel shaft and 44 inches for a graphite shaft. However, in the 21st century a standard driver is considered to be 45 inches.

Is it worth buying a new golf driver?

The new driver has to be better weighting, higher ball speed, and an overall better fit. Some people will go to a fitting for a new driver they have their heart set on and find they don't hit the ball as far as their current club. This has everything to do with shaft weighting, flexibility, torque, and kick point.

What is a good length driver?

“Most manufacturers have lengthened their standard driver from 45 inches to 45.5 or 45.75, because a longer shaft typically results in more club speed and hopefully more ball speed and longer drives,” says Kevin Sprecher, a GOLF Top 100 Teacher based at Sleepy Hollow CC in Scarborough, N.Y.

What does D mean on a golf club?

D wedges, also called DW wedges, usually range from 48-54 degrees depending on the brand. The D stands for dual, as in “dual-purpose” since it can be used for a variety of different shots thanks to its loft.

What does W mean on a golf club?

The term "pitching wedge" is now used by virtually all manufacturers and players to describe this club; Karsten Manufacturing (maker of the PING brand) simply labels their pitching wedges "W" for "wedge".

How far should I be hitting a 6 iron?

You should hit a six iron about 150 yards. The average golfer gets just over 150 yards with their six-iron. Players with faster swing speed will get closer to 165 or even 170 with a six iron.

What does 460cc driver mean?

“cc” stands for cubic centimeters and the USGA dictates the maximum volume a golf driver can be is 460cc. According to the USGA Rules for 2019, “The volume of the clubhead must not exceed 460 cubic centimetres (28.06 cubic inches), plus a tolerance of 10 cubic centimetres (0.61 cubic inches)” (Page 49).

Should I play a 44 inch driver?

Impact of Length on Shaft Weight If you are playing a shorter driver, say 44 inches instead of the "standard" 45 inches, you should consider a slightly heavier shaft, say 10 grams heavier. This will help create a more balanced feel and gain back some of the swing weight lost when cutting down the length of the club.

Does driver Size Matter in headphones?

Driver Diameter – Headphone sound quality depends to a great extent on the size of the diaphragm, which is indicated by the driver diameter: the larger the diameter, the better the sound quality tends to be. Most drivers for earbuds are 13.5–15.4 mm in diameter, with those for canalphones being 8.8–12.5 mm.

What is a standard driver length?

45.5" to 45.75" inchesWhat's the Standard Driver Length. The standard driver length for men's clubs is 45.5" to 45.75" inches long. Because women tend to be shorter than men, the standard women's driver length is usually closer to 44".

What determines the right driver for a golfer?

Choosing the right driver depends on length, loft and the golfer's stroke.

How long should a golf driver be?

Choose a driver with a shaft of the proper length. Interestingly enough, most tournament professionals opt for drivers that are 44.5” long, while most manufacturer make “off-the-rack” drivers that are an inch or two longer. Once again, there is no correlation between the length of your driver and the distance of your tee shots. You should find a driver that you can consistently hit the ball on the center of the club.

How much loft do you need for a golf driver?

If your swing speed is over 100 mph and you hit the golf ball a long way, you should have a driver with a loft of about 12 degrees, or less , and that will produce less backspin. But if you are like most golfers with swing speeds that are below 90 mph, you will need a more lofted driver that increases that backspin to keep the ball aloft.

Is trajectory rating the same as loft?

Don't think that trajectory rating is the same as loft. For instance, a driver may have a 10-degree loft, but if its center of gravity is toward the front, it will react more like a driver with an 8-degree loft.

How big is a golf driver head?

The size of a driver head is measured by volume in cubic centimetres and the maximum size allowed by golf's governing bodies is 460cc.

Why is it important to find a driver?

It's crucial - especially if you're playing regularly and looking to get better fast - to find a driver that is going to help you shoot the lowest scores.

Which is better for a player with slower swing speeds or players that need extra help to get the ball airborne?

Higher lofted clubs (e.g. 13 degrees) are better for player with slower swing speeds or players that need extra help to get the ball airborne.

Which is better, lofted or higher lofted golf clubs?

eight degrees) have a slightly lower trajectory, but go a little further in the hands of players who can generate plenty of clubhead speed. Higher lofted clubs (e.g. 13 degrees) are better for player with slower swing speeds or players that need extra help to get the ball airborne.

How to move CG in golf club?

The CG of a driver can be moved vertically, horizontally, or back and forward in a clubhead by moving fixed or adjustable weights inside the head.

What is CG in golf?

CG is another common phrase and it refers to the single balance point of the driver. Different brands have opposing views on where best to place the CG in their drivers. The CG of a driver can be moved vertically, horizontally, or back and forward in a clubhead by moving fixed or adjustable weights inside the head.

What does "resistance" mean in golf?

It refers to a club's forgiveness, specifically its resistance to twisting at impact.

What is a driver in golf?

The driver is a club that golfers at every level need to have before they head to the course.

How much does a golf driver weigh?

WEIGHT. Drivers typically range from 275 to 310 grams, but some can be as light as 265 grams in total weight. Manufacturers have focused on making golf drivers lighter to help increase clubhead speed. Most golfers benefit from having a lighter driver to help produce the most distance off the tee.

What is the most commonly used golf club?

The driver is one of the most commonly used and important clubs for golfers at every level. By finding a driver that fits you and your skill level, you will be one step closer to a successful day on the course. Once you find the driver that fits your game, you will be ready to put it to use.

What is the loft of a driver?

The loft is the angle of the clubface and can affect trajectory and distance. Drivers come in various lofts, from 8 to 15 degrees. Knowing which loft to choose depends on your swing speed:

What is a driver shaft made of?

SHAFT. The driver shaft is typically made of steel, titanium or graphite. Steel tends to be the heaviest but is often lower priced than the other two options. Titanium and graphite shafts are lighter and can help increase clubhead speed, which can lead to improved distance.

What material is best for a golf clubhead?

The material you choose will come down to personal preference. Consider: Titanium tends to be strong, long lasting and lightweight. This allows for larger clubheads without additional weight, helping players to swing faster for more distance with a greater margin of error, thanks in part to a larger sweet spot.

What is a 440cc driver's head made of?

The driver’s head is commonly made of titanium or composite materials.

What are the factors that determine the right driver shaft for a golfer?

A golfer’s physical size, arm length, swing speed, consistency, ball flight and feel preferences are all important aspects that go into finding the right driver shaft for you. Without going through a professional fitting, trial and error can help you determine a comfortable and effective length for you.

Why do golfers buy shafts?

The problem is that buying a shaft because someone else uses it is like buying a size 44-long jacket because that’s what Tiger wears. It can be counterproductive to your game to purchase a shaft that isn’t right for you.

What does low torque mean on a shaft?

5. Torque. A low torque measurement means that a shaft has greater resistance to twisting, while a high torque measurement means it will twist more easily.

Does the length of a driver shaft affect the strike point?

Length. Of course, the length of your driver shaft will significantly change how the golf club feels, but length affects strike point, too. As Briand says, a longer shaft will cause a less consistent strike on the face, and the golfer will tend to hit the ball closer to the heel.

Does weight affect swing speed?

As Briand explains, the weight of a shaft has less impact on swing speed than golfers think, but that lighter shafts could increase the rate of closure. That means if your golf ball is starting left and/or hooking, it might be time to look at heavier shaft options. Drivers.

What does weight do to a golf ball?

The heavier a shaft is, the more likely it is that your golf ball will fly low and with less spin. If it’s lighter, the ball will tend to fly higher and spin more.

What is tipping a golf shaft?

To accomplish this, a club builder will cut a portion of the top-end of the shaft to make it play stiffer; this is what many refer to as “tipping” the shaft. Remember, though, that tipping a shaft will change the bend point, and it’s also irreversible, so make sure you know the purpose behind tipping your shaft. 2.

How to increase trajectory of golf ball?

To increase your golf ball trajectory, reduce the flex of your shaft, conversely, to decrease the ball flight you have to use a stiffer shaft.

Why do golfers change their shafts?

Often golfers change the shaft on their driver for reasons other than fitting the best shaft. The reason could be as simple as the golfer likes the look of the shaft or a favorite professional golfer uses the shaft. The detrimental effect on your game can be avoided by visiting a professional club fitter.

What does shaft flex mean in golf?

Golfers tend to look at the shaft flex as an indication of how strong they are and how fast their swing speed is.

What is the difference between a lighter shaft and a stiffer shaft?

A lighter and more flexible shaft provides greater potential for distance gain while a heavier and stiffer shaft offers more potential for control.

Does a slow tempo swing require a soft flex?

A slow swing tempo, not necessarily swing speed, requires a soft flex. As your tempo increases, the stiffness of the shaft should increase.

How many factors are needed to get to the ultimate shaft?

There could be twenty or more combinations of factors that have to be matched to get to your ultimate shaft. Looking at your swing speed, tempo, and release point, you will have a starting point in your pursuit of finding the most suitable shaft to improve your game.

Why is it important to have the right shaft?

Having the right shaft plays a huge role in improving your game to the highest level that you can achieve. However, there are so many factors involved that not all golfers are aware of.

What do you want in a driver?

Many modern drivers are highly versatile but you certainly want one that accommodates a beginner. You want something with a lot of forgiveness that allows generating a good swing speed.

What is the best driver for beginners?

While all of these drivers are great for beginners, the Cleveland Golf Classic XL Driver is our top pick. It has a deep face that will give you huge confidence when you address the ball. It is highly forgiving and will deliver a decent distance.

Is it easy to swing a large head?

Modern materials and design will still make a large head relatively easy to swing.

How many cc is a Ping G410?

The Ping G410 Plus at 455cc has a slightly smaller head than many of its rivals but is very appealing at address.

What will have a major impact on the cost of the driver?

The type and quality of the material will have a major impact on the cost of the driver but many modern materials are lighter and perform better. You will have to balance your needs with your budget.

What happens if you have an incorrect shaft length?

The incorrect shaft length will increase the difficulty of using your driver effectively. Your swing style and speed are also factors that need to be considered. If you have the opportunity and budget, professional fitting is a great idea.

What is the best shape for a clubhead?

These days you get a dazzling array of head shapes. There is no best shape, it is all about what works for you, gives you confidence and feels right. Round shapes tend to be easier for beginners and aerodynamics are important to help you generate clubhead speed.

Why is it important to use the right golf clubs?

Using the right clubs can change the way you play on the golf course and help you reduce your handicap dramatically.

How to grip a golf club?

The proper grip should let you hold the club using your middle and ring fingers of your left hand with very little touching the pad with the thumb. If your finger doesn’t touch your thumb, it’s a sign that the grip is too big.

What loft is good for a fast swing?

Fast swing? Clubs with a loft of 8-9 degrees are great for very powerful golfers who want to hit further. ‘Normal’ players should avoid these clubs as they will achieve less distance.

What is the purpose of a driver?

Used off the tee on long holes, the purpose of using a driver is to hit the ball as far as you can.

Is it easy to buy golf clubs?

Golf Clubs for Beginners. It’s very easy to get caught up in the initial enthusiasm of starting a new sport and buying the best golf gear, but beginners beware. Golf clubs are best bought slowly, collecting more advanced ones as your experience increases and you progress in the sport.

What does it mean to have a bigger club head?

Generally, the larger the club head, the more forgiveness your swing has. Although you can make a poor hit and still achieve a good result with an oversized head, these are often heavy and hard to control. 2. Golf Clubs for Beginners.

How to tell if a golf club has a high loft?

You can judge the loft by how much of the face of a club is angled upward or how much the top of the face is angled away from the shaft.

How to determine the correct size of golf club?

The correct golf club size starts with the golfer’s height and wrist-to-floor measurement. After that, depending on the type of club – wood, iron, or putter – a size can be determined according to the manufacturer’s golf club sizes charts.

How tall are golf clubs?

However, manufacturers usually make clubs to account for golfers anywhere between 4’ 8” to 6’ 7” inches tall. These will just need to be ordered custom.

What is custom fitting golf?

Custom golf fittings will tell you the exact sizes that you need for each of your golf clubs. Knowing the proper golf club sizes will ensure that you can get the clubface to match up to the ball each and every time you swing. The more accurate your club sizes are, the better the chance you have of scoring and performing. Even though custom golf fittings can be expensive, most golfers find them to be very well worth the pricing.

Is a golf club the same size?

Not all golf clubs are the same size. Part of what helps golfers get distance is by varying the length of the golf club shaft. The longer the shaft, the further the club can go. In addition, it is important to remember that some golf manufacturers make clubs of different lengths.

Can you get a golf club set if you are standard height?

Of course, if you are considered to be standard height and have standard arm length, chances are you will have no trouble finding the right golf club set for you. However, anyone that falls outside this range needs to be aware of the ability to change the length of the club and get something custom fitted to your needs.

Can you use two different golf clubs at the same size?

However, these factors are not quantifiable so you won’t find them on any charts. Also, different manufacturers take different approaches to fixing certain issues, so even if you were to use two different golf clubs of the same grip size, the feel could be very different.

Can you play golf with an off size club?

Because there are plenty of variations, it’s unsurprising that a lot of people sometimes play with off-size clubs. Most pros recommend that even beginners should opt for a perfectly sized golf club in order to have the best learning experience.

Why is it important to choose the right golf driver shaft?

Choosing the right golf driver shaft for you is extremely important as it can have a great impact on distance, accuracy, and ball trajectory.

How fast should a golf driver be?

The faster your swing speed, the stiffer the flex of your shaft should be. Most average male golfers swing their drivers at about 90 MPH, carrying about 225 YDS, and would require an R, or regular shaft. Swing speeds and distances above that might require an S, or stiff shaft.

Can golf driver shafts have different kick points?

Golf driver shafts of the same overall flex or stiffness can have different kick points.

What happens if a ball is struck off the toe of the driver?

Referring again to the diagram, if a ball is struck off the toe of the driver, the clubhead will rotate more, putting sidespin on the ball resulting in off-target shots .

How does shaft weight affect driver?

The shaft weight has a major effect on the overall weight of the driver. As stated previously, the lighter the driver, the higher the swing speeds generated, resulting in greater distance.

What is the shaft length of a Cobra Long Tom driver?

Most of the standard shafts on the drivers on this site have lengths in the 45” – 46.5” range, with the exception of the Cobra Long Tom Driver which is fitted with the USGA maximum of 48”.

What are the physical properties of a golf driver shaft?

The physical properties of best golf driver shafts that should be considered are length, weight, torque, kick point, and flex . All these properties combine to produce a balance and a feel to a driver and can greatly affect the overall performance of the club. If playback doesn't begin shortly, try restarting your device.

Size & Material

Shaft

Weight

Length

Loft

• The loft is the angle of the clubface and can affect trajectory and distance. Drivers come in various lofts, from 8 to 15 degrees. Knowing which loft to choose depends on your swing speed: 1. Less than 60 MPH = 14-15 degrees of loft. 2. 60 to 70 MPH = 12-13 degrees of loft. 3. 70 to 80 MPH = 10.5-11.5 degrees of loft. 4. 80 to 90 MPH = At least 9 t...

See more on protips.dickssportinggoods.com

Adjustability

Golf Club Fitting