Golf-FAQ.com

how to plumb a putter in golf

by Gregg Watsica Published 2 years ago Updated 1 year ago
image

Here's how to properly plumb-bob a putt:

  • Get into a crouch 5-15 feet behind the ball. For longer putts, you may want to stand upright.
  • Using your thumb and forefinger, hold the putter just below the grip so that it hangs perpendicular to the green surface, in front of your face, with the clubhead just ...
  • The shaft should form a straight line from the ball (bottom) to the hole (top).
  • Looking through only your dominant eye* (with the other eye closed), note whether the green to one side of the shaft appears higher than the other. ...

Part of a video titled Does Plumb Bobbing Work For Putting? How To ... - YouTube
4:20
7:54
Up above the ball the bottom of the shaft. Bisecting the ball. And then you're straight betw behindMoreUp above the ball the bottom of the shaft. Bisecting the ball. And then you're straight betw behind the ball to the hole you're looking straight behind through the ball to the hole.

Full Answer

How to putt a golf putter?

Using your thumb and forefinger, hold the putter just below the grip so that it hangs perpendicular to the green surface, in front of your face, with the clubhead just off the ground. The shaft should form a straight line from the ball (bottom) to the hole (top).

How do you plumb-bob a putt?

Here's how to properly plumb-bob a putt: Get into a crouch 5-15 feet behind the ball. For longer putts, you may want to stand upright. Using your thumb and forefinger, hold the putter just below the grip so that it hangs perpendicular to the green surface, in front of your face, with the clubhead just off the ground.

How to putt a golf ball on the Green?

Get into a crouch 5-15 feet behind the ball. For longer putts, you may want to stand upright. Using your thumb and forefinger, hold the putter just below the grip so that it hangs perpendicular to the green surface, in front of your face, with the clubhead just off the ground.

Why do golfers hold their putters in the air?

By holding the putter in the air, they are trying to create an exact vertical line between the putter handle, shaft, clubhead (using gravity), ball and hole, which can help them determine which way their putt will break.

image

Does plumb bobbing actually work?

No, it only works to help you determine subtle breaks in the green that are sideways. It will not help you determine the slope of the putt or the grain, either. Only look for a plumb line if you aren't sure how a putt will break.

Why is plumb bob putt?

Plumb bobbing is a method used on the putting green to find which way a putt will break. Plumb bobbing is when you squat down behind the ball with your putter handing in front of your eyes, and read the line of the putt based on how your putter hangs.

How do you get your putter to read a green?

2:254:40How to plumb bob when you putt - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd look at the general break of the green. So look at the green as a whole rather than just at yourMoreAnd look at the general break of the green. So look at the green as a whole rather than just at your part i think that's a really great way to get a feel for the break on the green.

What does plumb bob mean in golf?

Plumb bobbing is a technique some golfers use to line up putts by using a putter as a plumb bob to create a vertical line they can use to compare the slope of the green. Plumb bobbing is a way to get a general feel for the overall movement of the green, not a way to line up putts.

How does a plumb work?

The plumb bob or plumb line employs the law of gravity to establish what is “plumb” (that is, what is exactly vertical, or true). You don't have to be a physics whiz to understand that a string suspended with a weight at the bottom will be both vertical and perpendicular to any level plane through which it passes.

Why do golfers wipe their putters?

The reason golfers wipe their putters clean is that sometimes dirt, grass, water, and sand can accumulate on the putter face. When you are practicing your putts on the green, sometimes the dirt will accumulate on the putter face. Putting is a very precise part of the game of golf.

How do you tell if a putt is uphill or downhill?

The best view to read the break of a putt is from below the hole. So for an uphill putt, you should view the putt from behind the ball looking up to the hole. Conversely, for a downhill putt, view the putt from behind the hole looking up to the ball. If you have the time, look at the putt from above the hole.

How do you read putts with your feet?

0:473:06Titleist Tips: Use Your Feet to Read Putts - YouTubeYouTubeStart of suggested clipEnd of suggested clipSystem is going to kind of lie to you so you've got to rely on your. Feet. Really easy to feel theMoreSystem is going to kind of lie to you so you've got to rely on your. Feet. Really easy to feel the side tilt. So right here on this putt i feel a little bit more weight on my lead left leg.

How do you AimPoint a putt?

0:548:40Does AimPoint Work? And How To Read Greens with ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAimpoint is a method of using your feet your knees your hips and your legs and your body to straddleMoreAimpoint is a method of using your feet your knees your hips and your legs and your body to straddle your ball. And stand between over your ball. And look between your ball in the hole.

Why do golfers hold the putter up high and align?

Golfers hold the putter up in the air when using the 'plumb bob' method to read greens. By holding the putter in the air, they are trying to create an exact vertical line between the putter handle, shaft, clubhead (using gravity), ball and hole, which can help them determine which way their putt will break.Plumb Bobbing: Can It Help Your Green Reading And Putting?https://projectgolfau.com › does-plumb-bobbing-work-in-...https://projectgolfau.com › does-plumb-bobbing-work-in-...Search for: Why do golfers hold the putter up high and align?

Why do pro golfers straddle the putting line?

Usually this leeway is used to repair inconsistencies in the green, but for the purposes of 'AimPoint,' the player is encouraged to stand on or straddle the line in order to determine which way the putt will break, in addition to deciphering how severe the slope is.Game Improvement: 'AimPoint' Will Change How You Look at Puttinghttps://pittsburghgolfnow.com › game-improvement-aimp...https://pittsburghgolfnow.com › game-improvement-aimp...Search for: Why do pro golfers straddle the putting line?

Do pros line up putts?

The majority of professional and collegiate golfers use the line on short putts, especially those that are not starting outside the hole. Many of those players don't use the line on putts with large amounts of break or outside 15-20 feet.Top 100 Teacher Confidential: Should you use a line on your golf ball?https://golf.com › instruction › putting › should-you-use-l...https://golf.com › instruction › putting › should-you-use-l...Search for: Do pros line up putts?

What is a plumb bobbing putt?

Plumb bobbing is a method used on the putting green to find which way a putt will break. Plumb bobbing is when you squat down behind the ball with your putter handing in front of your eyes, and read the line of the putt based on how your putter hangs.

How to putt a golf ball in front of your body?

Stand six to eight feet behind your ball. Hold the putter just under the grip with your thumb and forefinger so that the putter dangles in front of your body perpendicular to the ground. Step 3. Line up the shaft of the golf club so that it intersects both the golf ball and hole.

How to know if you plumb bob?

Trust your eyes when it comes to the plumb bob technique. To the naked eye, you may have a hard time seeing the break, but if you see it when you plumb bob, you know it's there. Do not use this method on a putt that has multiple breaks. Plumb bobbing a putt with more than one break will show only which way the ball will travel on ...

How far behind your golf ball should you stand?

Crouch 10 to 15 feet behind your golf ball as it sits on the putting green. Look for any breaks you can see so you can account for them when you take your practice stroke. Step 2. Stand six to eight feet behind your ball.

How to get a putter to line up with a hole?

Stand in line with the hole and your ball. Then hold your calibrated putter to line up with the hole. This example shows the shaft is on the left of the ball and that’s the high side of the green from where the ball will break down to the hole. Plumb-Bobbing on the Green.

How to line up a putter with an outstretched arm?

In any building, close one eye (remember to always use the same open eye for PB) and hold your putter with an outstretched arm as you line up a specific side of your shaft facing the frame of a door (not including the grip). Change the orientation of your putter head until one side of the shaft lines up perfectly with the frame ...

How to use PB eye?

1/ Stand below the hole (but fairly close to the hole) and ONLY use your PB eye (close the other one) to first line up the center of the hole with the center of your ball. 2/ Then hold your put ter in front of that eye with the correct putter face orientation (as it was calibrated) and line up the BOTTOM of the correct side ...

How to read a downhill putt?

Slight breaks on a downhill putt are the most difficult to read and should be read by using PB. CALIBRATE YOUR PUTTER BEFORE you ever Try to Plumb-Bob. Every putter head has a different weight so it may change the angle of the shaft as it hangs down from your hand. In any building, close one eye (remember to always use the same open eye for PB) ...

How many breaks on a golf ball?

2/ If you can see 2 or 3 breaks on the path for your ball (DON’T PLUMB-BOB) just make your best guess where your ball will break to reach the hole and prey for a 2 putt green. 3/ Ideally you should plumb-bob if you can’t see the break on a smooth green for up to a 10 foot putt.

What side of the green does the ball break on?

If the correct side of your shaft lines up on one side of your ball (the left of right side), that side is the HIGH side of the green so your ball will break from that side down to the hole as it nears the hole. You can only practice putting to understand how much break to expect.

What does PB mean in golf?

PB only helps you understand the break of the green UNDER YOUR FEET. Since your ball breaks the most as it slows down near the hole, you should only use PB FROM THE HOLE SIDE of the ball’s path to the hole. You rarely see this done correctly by the pros on TV. When to Plumb-Bob. 1/ Don’t waste your time plumb-bobbing when you can see an obvious ...

How to make a putter shaft slanted?

Hold up your putter by the handle, either directly on the grip or directly below the grip. Point the toe of the putter directly away from yourself or directly toward yourself to ensure that the line of the shaft appears vertical . If you point the toe sideways, the shaft will appear slanted.

What is plumbing in golf?

Plumbing helps golfers account for otherwise unseen contours in the green. The plumbing technique, also called plumb-bobbing, relies on using a dangling putter to provide a vertical counterpoint against which the horizontal slope of the green can be evaluated.

Is the alignment of a golf ball and hole with the vertical purely perspective?

This belief is nonsensical: The alignment of ball and hole with the vertical is purely perspective. If they don't line up from one angle, all you need to do is move over to a new spot. The plumbing technique can still be useful, however, as a means of orienting the green's slope with the vertical.

How do you use the plumb bob method when putting?

To plumb bob a putt, take your putter and hold it in front of your face. Grip the handle lightly with your thumb and index finger to let it hang naturally. Close your dominant eye and align the club shaft so it covers the centre of the ball, but also dissects the hole.

Does plumb bobbing a putt work?

Plumb bobbing when putting works effectively if done correctly, especially on shorter putts. Making sure you line the putter shaft up correctly with the ball and hole; gripping the handle loosely enough; and closing your dominant eye are three key steps to plumb bobbing putts the right way.

Why does a plumb bob work?

A traditional plumb bob, which consists of a weight dangling from a string, uses gravity to establish a ‘plumb’ line (that is, what is exactly vertical, or true). In golf, your putter head acts as the weight, and the shaft as the line to form the plumb bob. Establishing this line should, theoretically, help you detect any slopes on the green.

Why do golfers hold the putter up?

Golfers hold the putter up in the air when using the ‘plumb bob’ method to read greens. By holding the putter in the air, they are trying to create an exact vertical line between the putter handle, shaft, clubhead (using gravity), ball and hole, which can help them determine which way their putt will break.

Final message

Plumb bobbing has been a common green reading method used by golfers for years, but the jury is still out on just how effective this method is.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9