
- Clean your club with a damp microfiber cloth. Then allow club to air dry.
- Pour a small amount of rubbing compound on to a clean cloth.
- Start rubbing the cloth on to the sky mark. Use a circular motion when cleaning your club head.
- The sky mark will disappear.
- Ensure there’s no streaks left by the rubbing solution.
- Apply a small amount of car wax onto a clean cloth.
- Rub the club with the cloth using a circular motion. Be gently to ensure you don’t scratch or scuff the head.
- Your club will now look polished and sky mark free.
How to clean golf irons [in 5 Easy Steps]?
The Cleaning Process In 5 Easy Steps
- Preparation. In cleaning golf irons, I do not recommend using the sink. ...
- Soaking The Irons In Soapy Water. To soften the dirt, soak the clubs in a bucket containing warm soapy water. ...
- Cleaning And Inspecting The Grooves. It is important to pay attention to the grooves. ...
- Cleaning And Inspecting The Grips. ...
- Drying The Irons. ...
How to hit Irons in golf for beginners?
Hitting Irons For Beginners: 5 Steps. Low Point Control Drill. 1 and 2 Drill. Build A Stock Shot Drill. Train For Speed. Invest In Golf Technology. To understand how these drills were decided on, we must first understand the fundamentals of golf as laid out by Andy Plummer and Mike Bennett in their Stack and Tilt book.
How to grip Irons in golf?
Step-by-Step Guide to Holding a Golf Club
- Hold your club waist-high in front of you, horizontal to the ground, and square the club face.
- Always grab the club with your left hand first. ...
- Close your hand around the club.As you grip the club with your left hand, the heel of your palm should rest along the top edge of the handle (but you ...
How to restore golf irons?
Part 2 Part 2 of 2: Polishing the Club
- Squeeze a pea-sized drop of metal polish onto a polishing cloth. ...
- Smooth the polish over the metal sections of your club. Use the cloth to smear a thin, even coat of polish over the club.
- Leave the polish on the golf club for 1 minute. ...
- Wipe the polish off the club with a polishing cloth. ...

Can you polish scratches out of golf clubs?
0:432:46Removing Scratches From Golf Clubs - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo as far as your your metal woods go try some rubbing compound if you happen to get a knick or twoMoreSo as far as your your metal woods go try some rubbing compound if you happen to get a knick or two in your in your in your wood head it works great.
How do you polish scratches out of an iron?
You can use mineral oil, vegetable oil, or even olive oil. Rub the cloth against the steel, in the direction of the grain, to polish the metal. Add more oil as necessary. Continue rubbing until the entire surface has been polished.
How do I make my golf clubs look new again?
Mixing up warm water and mild soap. Fill the bucket with a not-so-hot water. ... Submerge the club several times for 5 to 10 minutes. If your club is not that messy, you can submerge the golf club heads for just 5 minutes. ... Remove and scrub the clubheads. ... Apply steel of chrome polish.
How do you polish old golf irons?
1:146:41How to Clean Golf Clubs - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow all you need to give your clubs a really good clean there's some very simple things that youMoreNow all you need to give your clubs a really good clean there's some very simple things that you probably already have. Now you can wash your clubs in a bucket. Or today we're doing it in the kitchen
How do you remove Sky marks from golf clubs?
1:0012:12Fixing Driver Pop Up Marks With TOOTHPASTE !! - YouTubeYouTubeStart of suggested clipEnd of suggested clipThat's right plain old toothpaste you've got it in your house at least I hope you do. But playingMoreThat's right plain old toothpaste you've got it in your house at least I hope you do. But playing toothpaste we can use to remove some light scratches pop up marks sky marks off of the crown of your
Does WD 40 remove scratches from stainless steel?
Wd40 removes scratches from stainless steel.
What can I use to polish my golf clubs?
0:491:57How to Polish Golf clubs at Home | Best Way Clean Polish Golf ClubsYouTubeStart of suggested clipEnd of suggested clipThree polish your golf clubs using metal or car polish and a soft cloth. Let the Polish sit for aMoreThree polish your golf clubs using metal or car polish and a soft cloth. Let the Polish sit for a minute before completely wiping it away with a different cloth.
How do I clean my golf iron face?
0:211:53How to Clean and Store Your Golf Clubs - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake your first Club. And dunk the head in the bucket of water for a few seconds remove. It and wipeMoreTake your first Club. And dunk the head in the bucket of water for a few seconds remove. It and wipe it off with the towel. Make sure all the debris has been removed from the grooves cleaning.
How do I make my irons look new?
Apply any metal polish or car wheel polish to the golf clubs. Most polishes can be applied with a soft cloth or towel. Let them sit for a minute, then wipe the polish from the clubs. Spray polishes are also available.
Can you use WD40 to clean golf clubs?
Remove the golf clubs from the bag; if you spray WD40 on your bag, it will smell for a long time. Spray the WD40 on your irons and wedges and let it sit for a few minutes. Take a dry cloth and wipe the WD40 off the clubs. Once it is off, you can wash and rinse the clubs.
Can you buff golf irons?
Buffing your golf clubs is a quick and easy way to restore their shine. Before you buff your clubs, it is best to clean them first, as this makes the buffing process more effective. Once they are clean, smear metal polish over the head of the club, allow it to sit for a minute, and then rub it off.
Does metal polish remove scratches?
Removing Scratches With Metal Polish Metal polishes usually contain fine abrasives that can also remove scratches, but you need to use one designed for the type of metal you're cleaning. Some metal polishes are all-purpose, but some are intended for use on only certain types of metal, such as brass or bronze.
How do you remove scratches from metal hardware?
Before applying any sort of polish, you'll want to start by buffing the scratched area with a dedicated stainless steel scratch remover. For small scratches, gently buff the area. For deeper scratches, you'll want to determine the direction of the grain of the stainless steel, and then buff in that direction.
How do you get scratches out of a steam iron?
How to Clean an Iron: 11 Ways to Tackle an Iron BottomDissolve Tylenol Into a Hot Iron Soleplate. ... Create an Iron Cleaning Paste With Baking Soda. ... Use a Cotton Swab to Clean Out the Steam Holes. ... Soak a Towel in Vinegar. ... Add Vinegar to the Water Reservoir. ... Make Magic With a Magic Eraser. ... Iron Over a Newspaper and Salt.More items...•
How do you remove scratches from galvanized steel?
For a finishing touch, polish and buff your galvanized steel using lint-free cloths and wax or metal polish. This will really make it shine, and will make any small scratches nearly invisible.
How to get rid of scuff marks on golf clubs?
All you need to do is buy a white magic eraser and rub it against your club. I’ve tried this myself and the scuff marks quickly disappear.
How to fix scratches on stainless steel golf clubs?
This is how you fix light scratches on stainless steel golf clubs. Wash the club head with warm soapy water and then dry the club with a towel. Rub fine grade 1,500 grit sandpaper over the scratches in a back and forth motion. This will polish your club head surface, and restore it to its original condition.
What causes scratches on golf balls?
After all, you’re smacking a metal stick against a solid golf ball. Light marks is the most common type of damage you’ll come across, and the easiest to remove. The small and often fine scratches are caused by everyday play. Chipping and fairway shots are the most often culprits.
What does it feel like to have a new golf club unwrapped?
The feeling of a new unwrapped golf club is intoxicating. It’s nice seeing the irons surface and sun combine into one shimmering beauty. However it doesn’t take long for the shine to wear off. The truth is scratches, sky marks and scuff marks on golf clubs are a reality for all golfers. While some golfers wear these marks as badge of honor, ...
Why won't golfers remove scratches?
Deeper scratches are difficult to fix, and this is why most golfers won’t bother removing them.
Why are there sky marks on my golf clubs?
Aside from the embarrassment, sky marks are quite ugly to look at many players tend to clean them. To avoid causing sky marks on your clubs , don’t tee off too high.
How to clean a golf club with a light compound?
Always choose the light version, as heavier compounds can damage your clubs coat. Clean your club with a damp microfiber cloth. Then allow club to air dry. Pour a small amount of rubbing compound on to a clean cloth. Start rubbing the cloth on to the sky mark. Use a circular motion when cleaning your club head.
How to clean golf clubs before polishing?
Cleaning the clubs thoroughly before a good polish. Mix two tablespoons of mild liquid dish-washing soap in a bucket with hot water. Any liquid dish soap will be adequate, but specialty soaps can also be used. Soak the clubs for several minutes to help loosen any debris that may be ingrained in the grooves of the club face.
Why do you polish golf clubs?
Polishing golf clubs not only improves the cosmetic appearance of golf clubs, but it also protects the clubs against environmental factors such as dirt and water. Polishing golf clubs also helps maintain a clean club face, which assures players that each ball struck is not affected from debris that may be on the face of the club.
How to clean rust off golf clubs?
Let them sit for a minute, then wipe the polish from the clubs. Spray polishes are also available. Spraying or wiping the shafts with polish can also help protect against rust.
How to clean a golf club with soap and water?
Gently work the hot water and soap over the face and back of the golf club with a toothbrush or medium-bristled brush. Scrub the club with medium pressure until it appears clean. Rinse the club with clean water.
What to do if you run out of golf club polish?
If you run out of polish, simply squeeze a little more onto your cloth. If you are sensitive to chemicals, wear gloves when buffing your golf clubs to stop your hands getting irritated from the polish. ...
How to get scratches off irons?
1. Squeeze a pea-sized drop of metal polish onto a polishing cloth. Polishing your clubs can help to prevent them from rusting and can help to remove small scratches from the irons. Keep in mind, though, that metal polish is really strong, so you only need a small amount.
How to restore shine to golf clubs?
Buffing your golf clubs is a quick and easy way to restore their shine. Before you buff your clubs, it is best to clean them first, as this makes the buffing process more effective. Once they are clean, smear metal polish over the head of the club, allow it to sit for a minute, and then rub it off. This will leave your golf clubs looking fresh ...
How to clean golf clubs with dishwashing detergent?
Fill a bucket with warm water and then measure in the dishwashing detergent. Use your hand to mix the water and detergent until the water begins to bubble. If you don’t have a bucket, fill a deep sink or a bath with water and detergent instead. This is a great way to deep clean your clubs, even if you aren’t planning on buffing them.
How to make a golf club look shiny?
Use a clean cloth to rub the head of the club in a circular motion until all of the polish is absorbed into the cloth. This helps to buff the club and will leave your club looking shiny and new. To make your club look extra shiny, rub your club for an extra few minutes.
What to use if you don't have a polishing cloth?
If you don’t have a polishing cloth, use a soft rag or a microfibre cloth instead.
How to keep golf clubs from rusting?
Dry the clubs with a soft cloth. This helps to prevent the clubs from rusting and allows you to remove any loose dirt that is still on the clubs. Start at the top of the club and then work your way down to the bottom. This helps to prevent drips from rolling down the clubs. Microfibre cloths work well for this job.
How to clean a golf iron?
Clubs can leave a mark or even cause a scratch. Prepare the following: Plastic bucket with moderately warm water. Dish soap. Scouring pad.
How to soften rust on golf clubs?
To soften the dirt, soak the clubs in a bucket containing warm soapy water. The soap-water solution should not be too warm and only deep enough to submerge the club heads (but not past the hosel). Warm water might loosen the ferrules, seep into the joint, and create rust spots that will eventually damage the shaft.
How to get dirt off golf club head?
During a swing, ball contact with the grooves creates friction that results in ball spin, consistent flight, and greater distance. Use the scouring pad and brush on the club head to remove the dirt.
What is the purpose of a tight grip on a golf club?
A tight grip prevents the club from reaching full speed during the swing and can cause hand injury. Cleaning the grip used to be as simple as using a scouring pad/brush and soapy water to scrub away dirt and sunscreen residue. That is not 100% applicable anymore.
What brush to use for rusty club heads?
If the rust is more stubborn, use the copper brush. The last option is the metal brush because of the possibility that it can scratch the chrome plating of the club head.
Why does my golf ball fly differently?
You wonder why the ball flew differently from your intended direction. The culprit might be mud sticking into your club head and/or ball. Normal golf rules allow balls to be marked, lifted, cleaned and returned to its original location. This is to keep mud from sticking to the ball and affecting its flight.
Can you use soap on golf grips?
That is not 100% applicable anymore. Golf technology has evolved and some manufacturers apply special coating on their grips to keep it tacky. Using soap, scouring pads and any abrasive material may damage or remove the coating. There are also brands that simply recommend brush and soapy water.
Series Navigation
In the world of refinishing, this is by far the most important preliminary step. After years of use, golf clubs will get beat up, and in order to make them appear “new,” it is important to remove these signs of use. When I first began learning how to refinish golf clubs, it took me a while to learn how to do this.
Materials Needed
Protective Gloves (preferably not baggy ones like I’m unfortunately using in the video) and Eye-wear
About the Author: Zach Gollwitzer
Hey!! I'm Zach, the founder of The DIY Golfer. I created this site in 2015 while playing D1 collegiate golf to help myself understand the game of golf better and improve as a player. Fast forward a few years, and it has become much more than a journal.
