Place the clubface square on the top side of the double-sided tape or under your golf club clamp. Make sure that the club is really square and the hosel is not too close to the edge to avoid a hosel line. A second pair of hands might also come in handy if it isn’t secure enough with the double sided tape.
Full Answer
When to use a wedge for a golf shot?
If you do not purchase a sand wedge right off the bat, you'll want to use your pitching wedge for sand shots around the green. When to Use a Wedge for a Golf Shot As for the appropriate time to use other wedges, that will, of course, be determined primarily by the yardage of your shot.
Should you add a sand wedge to your club?
Once you expand your wedge use, however, the sand wedge should be the first addition. Wedges feature the shortest shafts and highest lofts of any golf clubs. In fact, wedges are often identified by their loft rather than their name. A lob wedge might instead be called a "60-degree wedge," for example.
What is a lob wedge in golf?
As its name implies, a lob wedge allows a player to "lob" the ball high into the air, from where it will drop steeply down onto the green, with little or no roll. With pitching wedges typically lofted from 42 to 46 degrees, the gap wedge is so-called because it closes the "gap" in loft between the pitching wedge and sand wedge.
What is a gap wedge in golf?
With pitching wedges typically lofted from 42 to 46 degrees, the gap wedge is so-called because it closes the "gap" in loft between the pitching wedge and sand wedge. A typical gap wedge might might be lofted from 48 to 54 degrees. The gap wedge also goes by the names A-wedge, attack wedge and approach wedge.
What is custom fit for PXG golf clubs?
How to adjust carry distance?
What is gapping in golf?
Does PXG tungsten increase MOI?
How should I space out my wedges?
Know your pitching wedge loft. If it's 45 degrees or less, add three more wedges that are spaced apart by no more than 4-5 degrees each. So generally think about putting in a gap wedge that's 48 or 50 degrees, a sand wedge that's between 54 and 56 degrees, and a lob wedge that's between 58 and 60 degrees.
Is it good to rust your wedges?
A rusty wedge may also have a lower resale value too. That said, raw rusty wedges do have some cosmetic advantages. The rusty face definitely reduces glare from the sun and also shows up your strike pattern.
How do you customize golf wedges?
5:506:56The Shop: How to stamp and paint fill wedges - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo real gently you don't have to press down hard just real gently wipe it across the letters. And itMoreSo real gently you don't have to press down hard just real gently wipe it across the letters. And it will all the excess will come off leaving you with just a fresh. Clean. You know filled letters.
What 2 wedges should I carry?
Therefore, the top two wedges that a beginner should carry in their bags are pitching and a sand wedge.Pitching Wedge. Golf Monthly suggests that a pitching wedge carries an average of 44.5-degrees of loft, making it the strongest lofted wedge on the market. ... Sand Wedge.
Why do Vokey wedges rust?
The Jet Black will rust as the dark finish wears, while the Raw wedges will rust more quickly with exposure to air and moisture.
Do pros use raw wedges?
Raw (or unplated) wedges are a popular option in the professional ranks. They rust over time, are generally resistant to glare, and tend to produce a softer feel at impact.
What kind of paint do you use on wedges?
Enamel paint and preferably epoxy-based enamel paint is highly recommended. Enamel is oil-based, adheres easily to metal surfaces, is highly durable, and, has a gloss finish. Acrylic Paint. This paint is water-based and drys quite quickly and is cheaper than enamel paint.
Do you need to custom fit wedges?
“Always have wedges that match the spec and set up for your iron set,” Sherburne says. “Now this assumes your irons are fitted correctly, but usually you want the same shaft, length and lie angle in your wedges as the irons to allow proper gapping.
How do you fill a wedge with paint?
2:066:55How To Paint Fill A Golf Club - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's a pretty easy process to be honest. All you need to do is get a toothpick. And put the paintMoreIt's a pretty easy process to be honest. All you need to do is get a toothpick. And put the paint over the areas that you want to cover at first this will look a little messy.
What wedges should a 10 handicapper carry?
A mid handicapper should have a sand wedge with a higher bounce (10+ degrees) and a lob or gap wedge with a mid bounce (7-9 degrees). Mid handicaps should avoid wedges with low bounce.
Which wedge to use for chipping?
The sand wedge is the wedge that is the best for chipping. With a sand wedge, you can fly the ball reasonably close to the pin, and expect it only to roll a few feet. Sand wedges are great out of the bunker, and they provide a ton of spin even on shots out of the rough.
Should a high handicapper use a 60-degree wedge?
What Loft Wedges Should A High Handicapper Carry? High handicappers should carry at least a 56-degree wedge. In addition, it makes sense to have a 52-degree wedge and a 60-degree wedge to have a variety of shots. The thing that you have to pay attention to is the loft gapping in the set.
Does rust add spin to wedges?
The rust does not add spin, but a raw wedge will spin more, so... It's not the rust; it's the lack of plating. What would actually add more spin: hitting the ball in the fairway and having a good lie. You can customize them by grinding edges or bounce off in the tour van without it looking awkward.
Does rust affect golf clubs?
Made famous by Cobra's Trusty Rusty wedges, rust can actually increase the friction on the surface of a wedge and increase spin. If you are trying to make the clubs look newer, there can be several strategies for removing the rust that has built up.
Do all SM8 wedges rust?
The SM8 Jet Black all black setup is available online or in golf shops. *Jet Black wedges are raw and will show rust over time.
How do you take care of Rusty wedges?
0:473:47The GolfWRX Shop: Refurbishing Rusty Wedges - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo here's what you use double strength cleaning vinegar. This stuff is ten percent acetic acid. AndMoreSo here's what you use double strength cleaning vinegar. This stuff is ten percent acetic acid. And what that's going to do is it's going to help eat away at the rust.
What is a wedge in golf?
Wedges are the highest-lofted clubs in a set of golf clubs, designed for short approach shots (for most golfers, 120 yards and in), strokes played out of sand, chip shots and pitch shots, and generally any shot for which the golfer wants the ball to ascend and descend sharply.
Why do golfers use wedges?
Because wedge shots have such a high trajectory, they tend to roll very little once they hit the green. More accomplished players can produce a great deal of backspin with a wedge, causing the ball to back up (or "bite") once it hits the green. Any wedge can also be used for chipping around the green.
What degree is a pitching wedge?
With pitching wedges typically lofted from 42 to 46 degrees, the gap wedge is so-called because it closes the "gap" in loft between the pitching wedge and sand wedge. A typical gap wedge might might be lofted from 48 to 54 degrees. The gap wedge also goes by the names A-wedge, attack wedge and approach wedge.
What is the loft of a lob wedge?
A typical lob wedge might have a loft of 60 degrees to 64 degrees. As its name implies, a lob wedge allows a player to "lob" the ball high into the air, from where it will drop steeply down onto the green, with little or no roll. With pitching wedges typically lofted from 42 to 46 degrees, the gap wedge is so-called because it closes ...
How far should a lob wedge be?
A lob wedge would be 40-50 yards for men, 25-40 for women. A gap wedge would fall in between your pitching wedge and sand wedge yardages.
What is a 60 degree wedge?
Wedges feature the shortest shafts and highest lofts of any golf clubs. In fact, wedges are often identified by their loft rather than their name. A lob wedge might instead be called a "60-degree wedge," for example. Sand wedges were invented (generally credited to Gene Sarazen) to make shots out of sand bunkers easier.
Why are gap wedges called wedges?
Today, the other two wedges that are common are: Gap wedge: So-named because it falls in-between the pitching wedge and sand wedge in loft. The gap wedge has more loft than a PW, less loft than a SW.
How many grams are in a wedge?
A wedge is 300 grams plus, and 1 ccm3 of steel is 7.9 grams.
How many holes do you mill in a golf club?
Our first step in the process is to mill (port) 6 holes in the back of the club muscle, raising the center of gravity. This moves the sweet spot to the center of the club, just where it should be, giving your ball a lower more penetrating flight with a piercing trajectory and adding more control.
What is custom fit for PXG golf clubs?
This includes having your wedges precision gapped by a PXG Fitting Specialist. The ability to fine-tune your clubs to your individual swing helps you put together consistently better rounds and have more fun on the course.
How to adjust carry distance?
The easiest way to adjust your distance is with loft. Changing loft by one degree generally changes carry distance by roughly two to three yards.
What is gapping in golf?
Gapping refers to the intervals between your shot distances with different clubs. The size of the gap depends on how much speed you have.
Does PXG tungsten increase MOI?
Aggressive tapering from heel to toe and signature PXG tungsten weighting along the perimeter increases MOI, while the narrow heel effectively decreases bounce.
