- Clamp the grip end of the club in a vise. ...
- Test the alignment of the spine. ...
- Tape a strip of masking tape around the shaft just above the club head. ...
- Remove the club head and grip from the shaft.
- Find the dominant spine of the shaft with a spine finder. ...
- Fit the club head and grip to the shaft.
Why is it important to pure a golf shaft?
Why is the spine of the golf shaft aligned?
What is pureing a golf shaft?
What is the most popular golf system?
How much does it cost to pure a golf club?
Can a golf shaft go further than the club?
Does pured golf clubs affect performance?
See more
Is Puring a golf club worth it?
The Results Our first myth is totally busted – PUREing a shaft led to significant distance increases. On average, our testers gained over 7 yards of total distance with the PUREd six iron compared to the non-PUREd club. That's nearly a full club of extra distance despite the fact that the two clubs had the same loft!
What does it mean to pure a golf club?
You may have heard golfers say something like, “my shafts are pured.” To have a shaft that's “pured” is just another way of saying that the shaft has gone through an SST Pure analysis to ensure it's in the most beneficial orientation for consistent performance when attached to a club head.
How much does it cost to pure a golf shaft?
Club Champion charges $35 to PURE new shafts with sets built from scratch in our build shop. RetroPUREing, or PUREing clubs that were previously assembled, is also an option. It is a bit more costly due to the disassembling/reassembling that is required (about $80 per shaft at Club Champion).
Do pro golfers pure their shafts?
On every major professional tour, the best golfers in the world rely on the groundbreaking SST PURE Shaft Alignment to make sure their golf clubs perform consistently. Almost $2 billion has been made on the PGA Tour by players who have SST PUREd their shafts for consistency, accuracy and distance.
How do you pure a golf shaft at home?
How to Pure a Golf ShaftClamp the grip end of the club in a vise. ... Test the alignment of the spine. ... Tape a strip of masking tape around the shaft just above the club head. ... Remove the club head and grip from the shaft.Find the dominant spine of the shaft with a spine finder. ... Fit the club head and grip to the shaft.More items...
What is club champion Puring?
0:052:04Club Champion - SST Puring - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd what happens is is that creates a place where the shaft can't bend when you're swinging the golfMoreAnd what happens is is that creates a place where the shaft can't bend when you're swinging the golf club.
How do you pure a driver?
4:537:18PURE YOUR DRIVES FOR BETTER GOLF - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere swing to the top. And I would rehearse now our downswing where I'm going to make sure I missMoreThere swing to the top. And I would rehearse now our downswing where I'm going to make sure I miss or swing well under the alignment stick. And return back to the ball roughly.
Does SST Puring work?
In simplest terms, the SST PURE (stands for it stands for Plane of Uniform REpeatability) process finds a shaft's most stable orientation to minimizing twisting and off-line bending during the swing. This results in longer, straighter ball flight and more consistent performance in all PUREd shafts.
Are expensive golf shafts worth it?
Because of the material and production differences, there's usually a price tag difference as well. While they may look identical on the outside, the aftermarket version of a shaft is housing better performance and for most golfers, that's worth a slight increase in cost.
How do you pure graphite shafts?
0:542:48What is SST PURE Golf Shaft Analysis and Alignment? - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's performance is then analyzed in the logo of position to determine how it will perform if itMoreIt's performance is then analyzed in the logo of position to determine how it will perform if it will randomly assembled by the manufacturer. Using data collected during the structural analysis.
Is spine alignment necessary?
Having proper alignment goes beyond maintaining a good posture — it can also help prevent long-term pain. Misalignment may impair your range of motion, and severe issues can affect your quality of life. There may be signs that your spine is misaligned, along with pain around several joints in the body.
What is SST shaft pure alignment?
The SST PURE® Shaft Alignment System analyzes the structure of any golf shaft and identifies its most stable bending plane, or Neutral-Axis™. When assembled in the clubhead in this SST PUREd® orientation, the result is improved consistency from club to club within your set and set to set within your brand.
Does SST PURE make a difference?
In simplest terms, the SST PURE (stands for it stands for Plane of Uniform REpeatability) process finds a shaft's most stable orientation to minimizing twisting and off-line bending during the swing. This results in longer, straighter ball flight and more consistent performance in all PUREd shafts.
What is SST PURE shaft alignment?
The SST PURE® Shaft Alignment System analyzes the structure of any golf shaft and identifies its most stable bending plane, or Neutral-Axis™. When assembled in the clubhead in this SST PUREd® orientation, the result is improved consistency from club to club within your set and set to set within your brand.
Where do you align the spine on a golf shaft?
1:413:31How to Find the Spine of a Golf Shaft - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou might find more than one spine on the golf shaft. And don't be surprised to 32 be a hundredMoreYou might find more than one spine on the golf shaft. And don't be surprised to 32 be a hundred eighty degrees apart after all it's going to be a plane. And that's the point of least resistance.
What is flowing a golf shaft?
0:082:03Dallas Golf's Shaft FLOW Technology - Part 1 - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd what flowing is all about is trying to find the optimum position at a golf shaft.MoreAnd what flowing is all about is trying to find the optimum position at a golf shaft.
What is a pured shaft?
To have a shaft that’s “pured” is just another way of saying that the shaft has gone through an SST Pure analysis to ensure it’s in the most beneficial orientation for consistent performance when attached to a club head.
What does "pure" mean in golf?
We take a look at what it means to “pure” a golf shaft, or to have a set that’s “pured.”. Due to manufacturing tolerances, not all golf shafts are perfectly round or symmetrical. Any small imperfections — whether its wall thickness, roundness or otherwise — can cause variations in how one shaft performs versus another within the same model family.
Brianson
Hey guys, I was just wondering if anyone could explain the process of how one could manually spine a golf club to play more "pure".
QuickFeet
You can make your own spine tool but check out the link below. JB's tool works great.
highergr0und
It seems that most people install it just as you described (red line at 9). While it may make the shaft play a tiny bit softer, the real goal here is to make it so the shaft flexes with the clubhead square every time without any manipulation necessary.
marrigo
Typically the spine (blue mark in your description) is aligned at the 9 o'clock position (at the target) for a type 1 shaft. For a type 2 shaft the spine (blue) is oriented at either 6 o'clock (straight down) or 12 o'clock (up).
Brianson
Thanks guys...Wow, I'm going to have a bit more research to do on the topic before I really get into anything I guess.
LBlack14
You'll hear more different"opinions" on this than you can shake a stick at. This one of the most debated topics in golf forum history. Take it all in and then you'll form your own "opinion" on how to align your shafts. That's what I did.
Why is it important to pure a golf shaft?
Proponents of pureing golf shafts suggest that because the golf shaft is installed in the clubhead properly, the player can get the most distance out of their shot. When it comes to feel, golfers will not know that they are swinging a golf club that has been pured. When they hit a great shot, they still will not know that it was related to ...
Why is the spine of the golf shaft aligned?
This is because the spine of the golf shaft is aligned in a certain way to give the player the best benefit and eliminate some of the inconsistencies in the golf clubs. The best way for the spine to be aligned in a golf club is with the spine being located downline of the clubhead. If the spine is aligned directly with the clubhead, ...
What is pureing a golf shaft?
What Exactly Is Pureing A Golf Shaft. Pureing a golf shaft is when a golf shaft is taken out of the golf club, analyzed, and then placed back in at a strategic angle. Many golf clubs, when they come from a manufacturer, could have small imperfections in the shaft. This is not usually an issue, but for some players, it can be.
What is the most popular golf system?
The most popular system is the SST pure. You can send your clubs in to be pured, or you can work with a local Golf Works manufacturer to have them done. Another place to get it done is Dallas Golf; there they do something called Flowing.
How much does it cost to pure a golf club?
Pureing a golf club is going to cost anywhere from $30 to $40 a club. When you consider doing this with the majority of your golf clubs, the costs are going to add up. In fact, unless you love your current set of golf clubs, this is an investment that may or may not be worth it. If you are playing with a seven-year-old set ...
Can a golf shaft go further than the club?
This means that a pured golf shaft can potentially go one club further than the club you are currently using . When you look at it that way, this is quite a significant difference. Of course, there is always a downside to these great revelations in the golf world, pureing a golf shaft does come at a cost.
Does pured golf clubs affect performance?
How Does It Effect Performance. Having your golf clubs pured only makes sense if it is going to give you an increase in performance. Certainly, all of this information about custom fitting, lie angles, club weights, shaft kick point etc. can become a little bit over the top.
