
- Tape the club head with masking tape to prevent it from being scratched during installation. Place shaft firmly in the vise.
- Making sure the hosel in the club head is clean, apply epoxy all around the inside of the hosel. ...
- Gently, push the shaft into the hosel of the club head, turning the shaft at the same time.
- Twist the shaft a bit to ensure the shaft is all the way down at the base of the hosel.
- Use acetone to remove any excess epoxy on the shaft, the new club head or the hosel. Remove masking tape from the club head.
- Let epoxy dry for 12 to 16 hours, and the new club head should be ready for use.
How to install a golf club head?
Step 1. Tape the club head with masking tape to prevent it from being scratched during installation. Place shaft firmly in the vise. Step 2. Making sure the hosel in the club head is clean, apply epoxy all around the inside of the hosel. Also, apply epoxy around the end of the shaft where the club head goes.
How do you epoxy a golf club head?
Making sure the hosel in the club head is clean, apply epoxy all around the inside of the hosel. Also, apply epoxy around the end of the shaft where the club head goes. Gently, push the shaft into the hosel of the club head, turning the shaft at the same time.
Can you put a new shaft on a golf club?
Instead of putting another shaft on a golf club, most golfers decide to buy another club. But it is easy and less expensive to replace the shaft. Remove the old shaft. It can be done by melting the glue, or epoxy, that holds the shaft to the head of the club.
How do you remove steel shafts from a golf club head?
Using propane or a torch, heat the hosel of the club to remove the steel shaft from the club head. The heat will break the epoxy bond that holds the head to the shaft.

How do you reattach a golf club head?
0:006:41HOW to FIX your GOLF CLUB if the HEAD comes off | Easy TutorialYouTubeStart of suggested clipEnd of suggested clipIf you want to just make sure you're getting the right thing basically just one side hardener. AndMoreIf you want to just make sure you're getting the right thing basically just one side hardener. And one side resin. And they mix together to form a really strong bond.
Can you change the head on a golf club?
The need to reshaft golf clubs is common. It is sometimes necessary to have a professional tackle a complete reshaft job; however, it can make his job easier if you eliminate a step in the process. Removing a golf shaft from the head is fairly simple; however, it must be done carefully and properly.
How do you replace a iron head on a golf club?
2:3122:36GOLF CLUB BUILD - How to reshaft your irons Step by Step - YouTubeYouTubeStart of suggested clipEnd of suggested clipPull the shafts you don't need a shaft puller. Anything like that you can just heat them up andMorePull the shafts you don't need a shaft puller. Anything like that you can just heat them up and twist them off because it's a steel shaft.
How do you attach a golf head?
2:358:05How to Glue a Club Head to a Shaft | DIY Project - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd i'm gonna leave just a little glue to uh to make sure it dries you know so i can check um theMoreAnd i'm gonna leave just a little glue to uh to make sure it dries you know so i can check um the process. So put a little bit on the ferrule to the way it sticks there otherwise.
Can I put a new driver head on my old shaft?
The only way to know if we can put your old fitted shaft into a new head it to pull the shaft, weight the head and test the new head with the old shaft. The head may be heavier or lighter, the hosel dimensions may be off which could cause a length issue.
How do I replace my driver head?
0:045:16Golf Club Repair - Removing the driver head and cleaning & preppingYouTubeStart of suggested clipEnd of suggested clipWe can take the old shaft out of the shaft extractor here pretty easy to get the old shaft out justMoreWe can take the old shaft out of the shaft extractor here pretty easy to get the old shaft out just loosen up the screws. Take the protective film off the shaft. So you don't scratch it.
How do you replace club heads?
1:4010:45How to replace a golf club shaft - Step by Step - YouTubeYouTubeStart of suggested clipEnd of suggested clipProbably start off on high but you want to move it around on actual the hostile here kind of andMoreProbably start off on high but you want to move it around on actual the hostile here kind of and spinning it around a little bit and make sure you get this superhot.
How do you remove a golf club head?
Use a blowtorch or a heat gun to loosen the epoxy that fused the shaft to the club head. Depending on the age of your club, it could take a minute or two before the epoxy begins to liquefy. Once it melts, carefully remove the shaft from the club head, take off the ferrule from the shaft and set it aside.
How do you fix a broken golf club head?
1:5714:23LOOSE GOLF CLUB HEAD / How To Fix - YouTubeYouTubeStart of suggested clipEnd of suggested clipWell you can basically just skip. Ahead put a little bit of epoxy. In that space between the ferruleMoreWell you can basically just skip. Ahead put a little bit of epoxy. In that space between the ferrule. And the hosel squeeze them back together wipe it clean let it dry.
What glue is used to attach golf club heads?
A golf club epoxy is an organic compound that is a type of glue that can be used on golf clubs, to attach a shaft to the clubhead. Knowing how to use a golf club epoxy can be beneficial when your clubs need a quick repair job.
What kind of glue is used on golf club heads?
Golf club heads are attached to the golf shaft with epoxy glue. Epoxy is a thermosetting polymer that is a high strength adhesive. Two parts, the resin and the hardener, are mixed together to create a chemical reaction that cures the epoxy to hardness.
What is the best glue to use on golf clubs?
Permabond offers a range of toughened epoxy adhesives which are suitable for bonding golf clubs. They offer excellent adhesion to carbon, graphite, composite, titanium, steel, wood and many other materials.
How do you remove the head of a golf club shaft?
1:015:14Golf Club Repair - Part 1 - Removing a shaft & cleaning the hosel - YouTubeYouTubeStart of suggested clipEnd of suggested clipBasically. Get your electric heater heat it up just a little bit in that little plastic Ferro willMoreBasically. Get your electric heater heat it up just a little bit in that little plastic Ferro will come right off you can almost pull it off with your hands once it gets softened.
Why do golf club heads break off?
Golf clubs can break due to user error. Broken golf clubs occur when golfers slam the club head into the ground out of frustration. Incorrect storage of the club and poor swing technique will also cause shafts and heads to break.
Why did my club head flew off?
Storing Clubs in The Car Boot The adhesive used in securing the head to the shaft is high class, but the continuous variation in temperatures in the boot will slowly cause deterioration. Heads will fly off in all directions!
What kind of epoxy do you use on golf clubs?
Best 4 Epoxy Adhesives for Golf ClubsJ-B Weld 8281 Professional-Size Steel Reinforced Epoxy Twin Pack – 10 oz. View on Amazon. ... Brampton Epoxy Pro-Fix 20/20 Long Cure Golf Club Repair. View on Amazon. ... GolfWorks High Strength Epoxy Golf Club Head Shaft Adhesive 50 ml. View on Amazon. ... Permabond Epoxy For Golf Clubs.
Introduction
Steps to replace an old golf club shaft with a new steel shaft and replace an old grip with a new one.
Step 1 Golf Club Steel Shaft and Grip
Using propane or a torch, heat the hosel of the club to remove the steel shaft from the club head. The heat will break the epoxy bond that holds the head to the shaft.
Step 2
Use a wire brush to clean out the remains of the old epoxy from the club head.
Step 3
Use a piece of sand paper or a grinder to roughen the tip of the shaft where it connects to the hosel of the club head.
Step 4
Pour epoxy into a container and stir to mix it together. Once epoxy is mixed together, spin the shaft tip into the epoxy to prepare for insertion into the head.
Step 5
Insert the shaft into the club head. Hold the head and shaft together for approximately 30 seconds to secure.
Step 6
To replace the grip of the club, place the club on a level surface where you can cut a straight line through the grip using a razor blade or a utility knife.
Instructions
Tape the club head with masking tape to prevent it from being scratched during installation. Place shaft firmly in the vise.
About The Author
Tami Fisher received her undergraduate degree in mathematics, while also receiving a full-ride golf scholarship. She has extensive experience in the golf industry, as well as the employee benefits area. She is a die-hard Kansas basketball fan, and loves all sports.
How to put on a golf grip?
Place double-sided tape on the shaft where the grip will be placed and soak it with grip solvent. Pour a small amount inside the grip, then swirl it around until it is completely covered. Pour out the remaining solvent onto the double-sided tape, then put on the grip, making sure it is firmly set on the butt of the club.
How to remove a golf club shaft?
Step 1. Remove the old shaft. It can be done by melting the glue, or epoxy, that holds the shaft to the head of the club. Use a blowtorch or a heating gun for this purpose. Aim it at the hosel--the connecting part of the head--until the epoxy softens and you can easily remove the shaft.
What to use to insert graphite shaft?
If you are inserting a graphite shaft, it would be best to use a belt sander because you can easily damage it by using sandpaper. Also, rid the residue of the old epoxy for the hosel by using a wire drill bit.
Series Navigation
Using epoxy to install a shaft is not a difficult task, but I think some people get a bit confused when dealing with different types of golf clubs. Putters are fairly easy to do, but when re-shafting irons and woods, we have to install the ferrule as well, which is a bit confusing to the novice.
Series Navigation
Hey!! I'm Zach, the founder of The DIY Golfer. I created this site in 2015 while playing D1 collegiate golf to help myself understand the game of golf better and improve as a player. Fast forward a few years, and it has become much more than a journal.
What glue is used to attach golf club heads?
Golf club heads are attached to the golf shaft with epoxy glue. Epoxy is a thermosetting polymer that is a high strength adhesive. Two parts, the resin and the hardener, are mixed together to create a chemical reaction that cures the epoxy to hardness.
What type of epoxy is used for golf clubs?
The two basic types of epoxy suitable for golf club repair are quick cure and long cure. Quick cure is commonly called five minute epoxy and is generally desired only for putters and emergency fixes. Long cure epoxy is better over the life of the club for its higher shear strength.
Can you use epoxy to reshaft a golf club?
Regular two-part epoxy found in hardware stores can be used to re-shaft a golf club, but it is better to use epoxy designed specifically for golf clubs. Epoxy not formulated for the shear strength required to hold up to high impact will likely break loose.
