Locate the ignition wire on your golf cart. This wire goes from the golf cart key switch assembly to your cart's starter. Visually inspect the solenoid area of the starter, where the key switch wire plugs into the cart. On some cart models, this end of the key switch wire can become dislodged during use on rough terrain.
Full Answer
Where does the key switch wire go on a golf cart?
This wire goes from the golf cart key switch assembly to your cart's starter. Visually inspect the solenoid area of the starter, where the key switch wire plugs into the cart. On some cart models, this end of the key switch wire can become dislodged during use on rough terrain.
Can I use a key from one golf cart on another?
A key from one golf cart can be used on another EZYGO golf cart. All golf cart keys are dependent on the manufacturer. Each manufacturer will have the same key molds for the keys. Yes, the keys are universal and limited to the manufacturing company. This means that if you lose a key to a EZGO golf cart, you can easily obtain a duplicate.
How to replace the ignition switch on club car golf cart?
Remove the face nuts with a pair of pliers. Now, the ignition switch can be removed easily. Install the new switch on to the plate and screw the face. Reverse the steps given above for locking the ignition switch back in place. Turn on the switch and verify that it is working. How to Replace the Ignition Switch on Club Car Golf Cart
What does the ignition switch do on an EZ GO golf cart?
The ignition switch in an E-Z-GO golf cart is what enables the vehicle to start when you turn the key. If you're having a problem getting your golf cart to start, it's possible you have a bad ignition. Fortunately, it is very easy to install and replace the switch. It is both inexpensive and quick (around ten minutes).
How do you put a Killswitch on a golf cart?
Choose the Best Kill Switch. ... Remove the Cables Properly. ... Connect the Wires for the Kill Switch. ... Add the Wires Back to the Battery. ... Identify Where You Want the Switch. ... Put the Switch on the Frame. ... Test the Switch for Proper Operation.
How does a golf cart key switch work?
The ignition switch on a golf cart is crucial for getting the vehicle started and operating as smoothly as possible. It pulls electricity from the battery and sends a charge to the engine that gets your cart running.
How do you wire an ignition switch?
0:265:42HOW TO WIRE IGNITION KEY + STARTER SWITCH SIM ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipCut off the for metal terminals and strip the ends of the wires. Join the two white wires andMoreCut off the for metal terminals and strip the ends of the wires. Join the two white wires and install a ring terminal to the ends of the wires using a crimping tool. On.
How do I protect my golf cart from theft?
Preventing Golf Cart TheftSECURELY STORE YOUR CART. Whenever possible, store your cart in a locked garage or shed. ... INSTALL A UNIQUE KEY. ... HIDDEN KILL SWITCH. ... LOCKING MECHANISM. ... INSTALL A GPS.
How do you start an electric golf cart without the key?
Quick Screwdriver Method:Insert the tip of your screwdriver in the ignition switch's slot.Move the screwdriver up and down gently but firmly until you can turn the tool around the same way you would turn a key.This should fire up the cart. ... Another method would be hot-wiring which involves working the wires.
How do you bypass the key on a golf cart?
This process includes these steps:Turn off the ignition switch to minimize your risk of electrocution. ... Locate the wires for your cart's ignition switch. ... Use wire snips to cut these wires away from their connectors. ... Touch the engines together carefully to bypass the ignition switch and send power to your engine.More items...
Where do ignition switch wires go?
The vehicle's ignition wire goes to the “IGN” terminal of the ignition switch. This is an essential terminal because it serves the vehicle ignition, wipers, accessories, and other operating features. It is also the normal “run” position of the switch.
What color wires go to ignition switch?
Red, Black, White-Red and White Black are the new colors of the key ignition switch wiring.
What color wire is the ignition wire?
Red Color is used for accessories connections. Yellow Color is used for battery connections. Green Color is used for Starter Connection. Sky Color is used for the Ignition system.
Can you put an alarm on a golf cart?
Thankfully, there are many alarm systems that can be easily adapted to fit on your golf cart and protect it from theft and other issues.
Do all golf carts have the same key?
A key will not work on all golf carts. Instead, they are limited to the vehicles manufactured by that company. For example, if you lost the keys to your E-Z-Go TXT Elite, you would not be able to use a Clubcar cart key. Therefore, in most cases, golf cart keys are universal relative to the manufacturer.
Can you steal a golf cart?
Most golf cart thefts are crimes of opportunity, therefore, if a person leaves their keys in the ignition there is a greater likelihood of their golf cart being stolen. On January 2, 2014, we arrested a local juvenile for the theft and vandalism of an Avalon resident's golf cart.
How to check if key switch is working?
If you wish to check if the key switch is functioning properly, follow these steps. There are two probe wires present in the battery pack – a black and a red. Connect the black probe wire to the 36v negative terminal of the battery pack. The red probe wire should be connected to the back of the battery pack.
What to do if you can't wire a key switch?
If you are unable to wire it correctly, it may be a good idea to consult a key smith to get the key switch changed.
How to make a shopping cart start when the key is in ON position?
One of the solutions to this issue would be to use a toggle switch. Try wiring it in such a way that the cart would start only if the key is in ON position while the switch is in the OFF position. And by default, keep the switch in ON position. This way the cart will not work unless a person knows this particular arrangement.
What wires are used for toggle switch?
This is the connection from the battery. Usually, it is a red/ white wire which will be used for this purpose. This will need to be connected to the solenoid, V/R field, ignitor amidst others.
How to remove ignition switch?
Remove the face nuts with a pair of pliers. Now, the ignition switch can be removed easily.
Can you replace the ignition switch on a club car golf cart?
So, if you are looking to replace the ignition switch of a Club Car golf cart, the steps that you followed for the E-Z-GO may not help. A few minor modifications may have to be made.
Do all golf cart keys have the same key?
Yes, all club car golf cart keys are the same. The downside of owning a golf cart is that the key switch can be easily accessed using any key from the same manufacturer. If you have a single key from a particular manufacturer, you can easily use it to open all the carts made by them.
How long does it take to replace a golf cart ignition switch?
Fortunately, it is very easy to install and replace the switch. It is both inexpensive and quick (around ten minutes ). There are just four steps: Get the right equipment, prepare the golf cart, remove the console and the existing ignition switch, and lastly, install a new ignition switch and replace console.
What is the face nut on a car ignition?
The face nut is the round piece that holds the ignition switch in place. Once the face nut is removed, the ignition switch will detach. Hang onto the lock nut for the new ignition switch if a new lock nut is no available. Remove existing ignition switch from plate.
Can you start work before preparing your cart?
Don't start work before preparing your cart.
Install a unique key switch
One of the most common and inexpensive methods to lock a golf cart is to install a unique key switch. Standard golf carts of the same brand use generic common keys, so everyone has basically the exact same key. Many manufacturers offer unique key switches for their brands to give you a different key option with your cart.
Install a key pad lock
Installing a key pad lock is another common method to lock a golf cart. These electronic pads wire into the electrical system and effectively disable the cart when parked. Until the proper key code sequence is entered, the cart will not move even with the normal key.
Install a manual disconnect switch
Manual disconnect switches are also available to lock a golf cart. This switch is capable of handling high current and typical disconnects your main power flow from the battery bank. They are usually installed in a hard to find location and some of the better ones actually have the capability to install a padlock as well.
Install a security system
There are many security systems commercially available to disable your golf cart via a key fob. These security systems wire into your control circuit of the ignition system. If you do not have the key fob to disable the alarm, the cart will not move despite having a key in hand.
Install a pedal lock
Installing a pedal lock is yet another way to lock a golf cart. There are several pedal boxes on the market which prevent the accelerator pedal from being pressed by locking it into the upright position. If you can’t press the pedal down, you can’t drive it off.
Install a steering wheel club
Just like in the automotive market, there are various “club” like products available to lock your steering wheel into a undesirable and un-drivable position. If you can’t steer, it is difficult to drive off.
Install a wheel lock boot
Kind of clunky and cumbersome to travel with but a wheel lock boot with definitely prevent your wheels from rolling. Better suited to lock a golf cart at home.
Why replace the key wire on a golf cart?
Replace the golf cart key switch wire if the connector to the key switch or solenoid is significantly frayed or corroded. Over time, corrosion will build up on the ends of the wire due to exposure to damp weather. Significant corrosion build-up can prevent your cart from starting consistently and ultimately result in the cart failing to start.
How to restart a golf cart?
If you see that the wire plug is hanging free from the starter assembly or appears dislodged, plug it back into the solenoid or re-seat the plug and attempt to restart your golf cart.
What direction does a golf cart transmission selector go?
Confirm that your golf cart transmission selector switch is set fully to the forward, reverse or park direction , depending on your model of golf cart. If the switch is partially set in between modes, it can result in your cart failing to start correctly.
Can a golf cart have a key switch?
No matter what brand of golf cart you own, it will eventually have problems starting due to normal wear and tear. These problems can range from minor to major. A common area for golf cart owners to troubleshoot is the golf cart key switch. By troubleshooting, identifying and repairing the switch yourself. you can save money on a mechanic.