How to Install a Shaft in a Golf Club
- Remove the old shaft. It can be done by melting the glue, or epoxy, that holds the shaft to the head of the club.
- Cut the shaft to the proper length, depending on what club you are modifying. There are websites that can help you determine the length.
- Roughen the tip of your new shaft before inserting it into the hosel of the club head. ...
- Apply epoxy to the tip of the shaft and the inside of the hosel of the club head, and insert the shaft into it.
- Prepare the shaft for its new grip. Place double-sided tape on the shaft where the grip will be placed and soak it with grip solvent.
How do you replace the shaft on a golf club?
Steps to Replace a Golf Club Shaft at Home
- Choosing the Right Golf Club Shaft. To begin with, you will need to get your hands on a golf club shaft. ...
- Cleaning the Club. Now, take out your utility knife. ...
- Taking the Shaft Out. It is now time to release the head from the shaft. ...
- Scrapping off Any Residuals. ...
- Installing a New Shaft. ...
- Finishing Touches. ...
How do you shorten a golf club shaft?
To do that, the DIY golfer will have to:
- Remove the existing grip.
- With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw.
- Re-install a grip on the newly shortened shaft.
- And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club. ...
How to install a new Golf Club shaft by yourself?
putters)
- Pro-Fix 20/20 Long Cure Epoxy
- Ferrule Make sure you purchase the correct size! ...
- Drill Driver and Small Drill Bit (for removing old epoxy inside the shaft)
- Epoxy Board (or some smooth surface to mix the epoxy on)
- Something to mix the epoxy with (end of a paintbrush, nail, screwdriver)
- Coarse Sand Paper (80 Grit works fine)
How to reshaft a golf club?
Update Your Golf Club With a New Shaft
- Steel Shafts: To remove a steel shaft from a metal wood or iron, place the shaft in a super lock tight shaft holder. Tighten the STSL in a vise. ...
- Measure the shaft tip. ...
- After the tip has been trimmed, abrade or roughen the shaft tip. ...
- Align the shaft graphics the way you want them by rotating the shaft. ...
- Position the club in the normal playing position. ...
Can you put new shafts on golf clubs?
Shafts can be replaced at golf pro shops and most golf stores, but it is also a fairly easy project to do yourself. Replacing your own shaft can save time and money, and allow you to try a new shaft without purchasing new clubs.
How do you install a golf club shaft?
5:117:44SHAFT INSTALL Steel - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the ferrule is in position take the head and push the ferrule into its final position tap theMoreOnce the ferrule is in position take the head and push the ferrule into its final position tap the butt of the shaft on a hard surface to ensure the shaft is installed to the bottom of the hosel.
How do you Reshaft a golf club at home?
2:2522:36GOLF CLUB BUILD - How to reshaft your irons Step by Step - YouTubeYouTubeStart of suggested clipEnd of suggested clipUp the house'll. Pull the shafts you don't need a shaft puller. Anything like that you can just heatMoreUp the house'll. Pull the shafts you don't need a shaft puller. Anything like that you can just heat them up and twist them off because it's a steel shaft.
Can I Reshaft my own golf clubs?
The average cost to reshaft your golf clubs is $24 per club plus the cost of the shaft and grip. A new iron shaft and grip can range between $10 and $95 while a new driver shaft and grip can range between $18 and $440. The majority of the cost comes down to what type of shaft you want and what grips you like.
How are golf shafts attached?
It can be done by melting the glue, or epoxy, that holds the shaft to the head of the club. Use a blowtorch or a heating gun for this purpose. Aim it at the hosel--the connecting part of the head--until the epoxy softens and you can easily remove the shaft.
How do you Reshaft a driver at home?
0:144:53How To Reshaft Golf Clubs - YouTubeYouTubeStart of suggested clipEnd of suggested clipHere just as the pocketable bandha looks better with it as you can see two of ours also prep the tipMoreHere just as the pocketable bandha looks better with it as you can see two of ours also prep the tip taken basically the paint off the shaft that way to here to the epoxy.
Is it difficult to Reshaft irons?
If you are reshafting with steel irons, it is usually pretty straightforward. However, you will need the proper tools and space to complete this project. By the time you set up a shop with the equipment you need, you will probably be better off having someone do this for you.
Is it worth Reshafting my irons?
Reshafting is just one way to keep your clubs performing at a high level. You can also benefit from regripping your clubs. Replacing worn-out golf grips can help make your clubs feel new again. Adding the right shaft to your favorite clubs can get you back on the course and working toward a new personal low round.
How long does it take to Reshaft clubs?
It takes 24 hours to reshaft a golf driver. If you use an epoxy such as the Tour epoxy, you can get done with the reshafting process really fast and your driver will be ready to use in about half an hour.
Can you put new shafts in irons?
Can golf irons be reshafted? Yes, just like other types of golf clubs, golf irons can also be reshafted using a golf repair service.
How do you pull a golf shaft?
6:2514:27pulling a golf shaft - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd I like to do is I like to pinch. Down. And then pull back pinch down and then pull back. AndMoreAnd I like to do is I like to pinch. Down. And then pull back pinch down and then pull back. And this way you don't scrape a shaft.
Can you put a new shaft on a driver?
Replacing your old shaft can be a relatively painless process for you or your local repair shop. If your favorite old driver seems to have run out of quality hits, you might want to refresh it by adding a new shaft to the club.
Can you put a new shaft on a driver?
Replacing your old shaft can be a relatively painless process for you or your local repair shop. If your favorite old driver seems to have run out of quality hits, you might want to refresh it by adding a new shaft to the club.
How much does it cost to Reshaft a driver?
The cost of reshafting a golf driver is between $15 and $45 USD. The labor cost of reshafting is usually around $20 USD. However, the actual overall cost can also depend on the materials used as well as the type of grip and shaft you are looking at.
What glue is used for golf club heads?
Golf club heads are attached to the golf shaft with epoxy glue. Epoxy is a thermosetting polymer that is a high strength adhesive. Two parts, the resin and the hardener, are mixed together to create a chemical reaction that cures the epoxy to hardness.
Series Navigation
Using epoxy to install a shaft is not a difficult task, but I think some people get a bit confused when dealing with different types of golf clubs. Putters are fairly easy to do, but when re-shafting irons and woods, we have to install the ferrule as well, which is a bit confusing to the novice.
Series Navigation
Hey!! I'm Zach, the founder of The DIY Golfer. I created this site in 2015 while playing D1 collegiate golf to help myself understand the game of golf better and improve as a player. Fast forward a few years, and it has become much more than a journal.
